Making Skimboards

[jorjitex29]

jejeje qq riddikulo jajajajaj

[DO1TMAN]

yo what kkinda paint did u use?

[sk8snap123]

wint it get waterloged



[jeepcj7dude]

@100JULIAROCK

Thanks man.... father son Saturday. You should see the carbon fiber ones we made after that!!

[fuckyou11275]

wheres the waves?

[kialn]

@fuckyou11275 if u want waves try searching SURFING instead of skimboarding! just saying!!!

[rosence09]

mga gago



[slotstikskimboards]

thanks for the laughs... you guys were great

[jeepcj7dude]

@slotstikskimboards

No problem  ?!????

[jhonnieg]

Hello, that type of wood is and that measure is? I could help

[winner946]

hey guys how thick was your wood and what wood was it

[wildtiger45]

Hey is this Wickanninish beach near Ucluelet?

[jeepcj7dude]

@wildtiger45

Good thinking but no,

It was actually at white rock B.C. on the mainland.

[Q8hammer1994]

could u make your on traction and wax if so how ?

[jeepcj7dude]

@Q8hammer1994

Grab some surf wax. Rub it all over the top of the board. Sprinkle some sand on the wax and rub it in to the wax!! Super sticky

[Q8hammer1994]

WOW GREAT DUDE BUT WHAT KIND OF WOOD U USE

[jeepcj7dude]

@Q8hammer1994

Two side good plywood. Then sand it like crazy!!

[klxman118]

damn that kid sucks

[jeepcj7dude]

@klxman118

It was his first time. Oh and you fucking suck. Nice room by the way you little fucking nerd. "I have an x box with a blue LED". Who fucking cares.

Oh and P.S. I know where you live now and "That kid is much bigger now and he is gonna come rape you in front of your parents.

See you soon ;)

[guitarhero12197]

Is their anything special you need to put on the bottom to make it slide?

[sfrew1992]

@guitarhero12197 sand the fuck out of it and then lacure it!, do atleast 3 coats and sand it down with wet and dry too, then give her a go :)

[WolfStar88]

What Type Of Wood Did You Use?

[jeepcj7dude]

@WolfStar88

3/8" two side good plywood

[WolfStar88]

@jeepcj7dude- Thanks. Also did the nose stick up by its self. Or did you use a tool?

[jeepcj7dude]

@WolfStar88

You use a belt sander to form it. large bevel on the front... Smaller bevel on the rear and slight bevel around the edges.

[damanisdakila]

hey what song was that its cool and nice skim boards im going to try it

[jeepcj7dude]

@damanisdakila

Thanks man!!! Song : "Grab the devil buy the horns and F^ck him up the ass

[damanisdakila]

@jeepcj7dude thanks bro

[jeepcj7dude]

@damanisdakila

np dude

[frustrationskating]

what font is that?

[jeepcj7dude]

@frustrationskating

FONT???

[jeepcj7dude]

@frustrationskating

Ohhh on our names?? I dunno it is in pinnacle studio 10

[frustrationskating]

is pinnacle free? I use camtasia studio 5 and sony vegas 8.0.

[jeepcj7dude]

@frustrationskating

You have to buy pinnacle

[frustrationskating]

@jeepcj7dude I figured out how to get custom fonts in sony vegas, its all good.

[jeepcj7dude]

@frustrationskating

Nice!!! 

[zabbie]

the bottom of the skimboard do u have to put any plastic to protect the bottom or wood is fine?

[jeepcj7dude]

Fiber glass resin works great on top of the wood

[zabbie]

That is to protect the wood? so that if the bottom of the skimboard runs across the sand it would not spoil the wood?

[zabbie]

That is to protect the wood? cause where i live the sand is rough so i want to protect the wood and move across the sand smoothly

[jeepcj7dude]

@zabbie

Yup....... It protects the wood as well as makes it "Skim" better !

[9878765454]

,,|,,

[SmokeWeed420GetHigh]

Just a tip... Start running then drop the board.. try to get on it quick instead of chasing it.

[jeepcj7dude]

yeah we started doing that!! thanks dude

[14magicpenguins]

do skimboards not have to bend upwards at the nose?

[jeepcj7dude]

yes.. all around the edge

[15njcarter]

Yea if you dont want your nose to stick. Also gives much MUCH better glide and speed. Otherwise you're faceplanting all day.

[zicatelasurf]

pobres tontos me dan mucha lastima que orendas tablas

cualquier baboso les gana a sus tablas dan asco no insulten el nombre skimbord ok

att:sebaskim

[jeepcj7dude]

english dude,,,,,  english

[janario18]

do u have to put anything on the bottom like plastic?

[jeepcj7dude]

resin is good

[mmakert]

what type of wood is that?

[jeepcj7dude]

ply- wood ;)

[dumaaaaaa]

and how do you make your videos play faster?

[jeepcj7dude]

use pinnacle editing software.

[dumaaaaaa]

what kind of varnish did you use? what size is your rocker? rails??

[jeepcj7dude]

No varnish...... marine fiber glass resin...

You can make the rocker what ever size you want to depending on your weight and skill level

[dumaaaaaa]

so marine spar urethane is okay?

[parfo12321]

how would u give the board a tip meaning the tip on the front stik up do u no???

[jeepcj7dude]

you need to use a belt sander sand the sht outa the bottom of the tip till it is beveled correctly. Then soak the wood in water and dry it supported on tip and tail with weight in the middle. It'll have a nice ARC to it after.... paint it  resin it and away you go.........

[andgms]

what's size?

[tester1125]

how much to make 10 boards (around about)

[jeepcj7dude]

depends how many rocks you hit. Other than hard stuff sand doesnt really hurt it.

[toddvandriel7]

song title?

[jeepcj7dude]

GROUP = Sum 41

Song title = "grab the devil by the horns and fuk him in the ass"

[toddvandriel7]

hey ive been trying to find this song for a while now can anyone tell me the name of the song on this video? Thanks

[jeepcj7dude]

GROUP = Sum 41

Song title = "grab the devil by the horns and fuk him in the ass"

[conradicus360]

do your skim boards need have a curve

[jeepcj7dude]

do you mean make them square?? Or do you mean bevel on the tips?

[mikeasaurus8]

What do you put on it so the wood wont rot?

[jeepcj7dude]

Marine resin for fiberglass  two coats

[jeepcj7dude]

Need more footage on the beach.....

We will get more next weekend and edit this.