@DarthWater7 thats why woodsball shouldnt even be considered paintball. You want Milsim you go play airsoft. But 450 fps. Thats HILARIOUS. No mask can withstand even 350. Niether can any skin! For that matter. Stop trying to defend your ignorance. Woodsball sucksss
Oh and only 300 plus feet? The effective range of a marker is 150 feet, and all guns have the same accuracy and range, so your "snipers" are as good as a Brass Eagle T-Storm.
@DarthWater7 Snipers? HA! 450fps? HAAA! Idiot, and the guy who said her a TechPB was saying that because on the forums the have this thing called punk works where the test things from accuracy, fps, barrel rise, different types of barrels and paint, porting etc.
@playpaintball88 no wonder I'm rockin a vibe blackheart with a Guerrilla steelie for now my last tank failed hydro :( and it's high pressure the highest my reg can shoot is like barely 350
@DarthWater7 WTF that's bs give us the name of that park there is now way a marker would pass 350fps even with a hot spring and max pressure and if it does even the stiffest out there paint would break and if you had a garbage spyder feedneck that thing would have broken in like 5 shots that's BS the highest I've seen at a park is 290fps and in the .50 cal division
@AAVince2513 ------ the 350fps threshold is easy to break if you have a marker operating at low pressure. I have a DM5 that i bought and thought it looked like it was shooting crazy hot and when I went to the field it was consistently shooting at 440fps no breaks with rec play paint. When you consider an unmodded Spyder or Tippman hits the ball with CO2 at about 850 psi air the balls can easily withstand a low pressure gun cranked up.
I have an Azodin Zenith. Now when you said they get a 40 fps increase. Does that increase make the gun use more air? since it's at a higher velocity? If not why not just increase the velocity yourself?
@DarthWater7 there is an increase because no air is being wasted
if u increase the velocity with the reg, or spring u will waste more air
if the bolt seals the air off, and increases velocity, u will have to decrease pressure on the gun, therefore u will waste less air, and therefore, better efficiency
the max fps that u can use is 290, if u change to the hush, u will be shooting over 300, lower the pressure, and u will be wasting less air than with the stock bolt
450 FPS? Dude that is bullshit. Everyone would be breaking paint - and if its a legit field I can guarantee they are going to get their asses sued for not complying to ASTM standards. With that kind of pressure breaking a bone at close range isnt unlikely - thats if they dont blow out their marker with the pressure cranked that high
@rageprblm Buddy, calm the fuck down. Don't come calling bullshit without knowing crap. I said SNIPERS. It's a scenario field and our snipers are only allowed to shoot at +300 ft distances, shorter than that, they have tippmann pistols. and yes they do shoot over 450fps, most have modified tiberious arms snipers.
@DarthWater7 impossible there is absolutely no way a marker is able to shoot over 350, here at tech pb we have many markers and we tested it no maker or woodsball marker we used and tested was not able to surpass 450. company's would not allow to go that high for legal reasons. and every field must have a limit also for legal reasons
@DarthWater7 Thats just retarted anything over 300 is messin' up the trajectory of the paintball. there is no way your gonna "SNIPE" at a velocity like that. the best velcoity is around 285
@DarthWater7 the velocity increase isnt the effect you want. it's that the velocity increases because with the same amount of air as with the stock bolt, the gun shoots at a higher velocity, meaning that you need to lower it back down to where you had it with the stock, therefore cutting off some air, therefore increasing air efficiency
@DarthWater7 thats why woodsball shouldnt even be considered paintball. You want Milsim you go play airsoft. But 450 fps. Thats HILARIOUS. No mask can withstand even 350. Niether can any skin! For that matter. Stop trying to defend your ignorance. Woodsball sucksss
AoGxR3con 1 month ago
Oh and only 300 plus feet? The effective range of a marker is 150 feet, and all guns have the same accuracy and range, so your "snipers" are as good as a Brass Eagle T-Storm.
BigHairyBacon 1 month ago
@DarthWater7 Snipers? HA! 450fps? HAAA! Idiot, and the guy who said her a TechPB was saying that because on the forums the have this thing called punk works where the test things from accuracy, fps, barrel rise, different types of barrels and paint, porting etc.
BigHairyBacon 1 month ago
i got it, your gun just doesnt shop....
MrMakochon 2 months ago
@playpaintball88 no wonder I'm rockin a vibe blackheart with a Guerrilla steelie for now my last tank failed hydro :( and it's high pressure the highest my reg can shoot is like barely 350
AAVince2513 3 months ago
Yea darth I doubt you even play paintball........ Everyone knows a field won't allow it......
iMOSKUL 3 months ago
lol ball pinching
Pilotsofer 5 months ago
@DarthWater7 WTF that's bs give us the name of that park there is now way a marker would pass 350fps even with a hot spring and max pressure and if it does even the stiffest out there paint would break and if you had a garbage spyder feedneck that thing would have broken in like 5 shots that's BS the highest I've seen at a park is 290fps and in the .50 cal division
AAVince2513 7 months ago
@AAVince2513 ------ the 350fps threshold is easy to break if you have a marker operating at low pressure. I have a DM5 that i bought and thought it looked like it was shooting crazy hot and when I went to the field it was consistently shooting at 440fps no breaks with rec play paint. When you consider an unmodded Spyder or Tippman hits the ball with CO2 at about 850 psi air the balls can easily withstand a low pressure gun cranked up.
playpaintball88 3 months ago
I have an Azodin Zenith. Now when you said they get a 40 fps increase. Does that increase make the gun use more air? since it's at a higher velocity? If not why not just increase the velocity yourself?
DarthWater7 1 year ago
@DarthWater7 there is an increase because no air is being wasted
if u increase the velocity with the reg, or spring u will waste more air
if the bolt seals the air off, and increases velocity, u will have to decrease pressure on the gun, therefore u will waste less air, and therefore, better efficiency
the max fps that u can use is 290, if u change to the hush, u will be shooting over 300, lower the pressure, and u will be wasting less air than with the stock bolt
dvader500 1 year ago
@dvader500 Well yeah. But the field I play at has no velocity limits so most people have it around 330. and the snipers have it at +450
DarthWater7 1 year ago
@DarthWater7 isnt that a bit dangerous?
anyway, it should definatley increase the efficiency and consistency of ur marker.
because ur gonna need to use less pressure, as i keep repeating and looking like a retard
dvader500 1 year ago
@dvader500 Just a little bit. Haha.
DarthWater7 1 year ago
@dvader500
450 FPS? Dude that is bullshit. Everyone would be breaking paint - and if its a legit field I can guarantee they are going to get their asses sued for not complying to ASTM standards. With that kind of pressure breaking a bone at close range isnt unlikely - thats if they dont blow out their marker with the pressure cranked that high
rageprblm 1 year ago
@rageprblm Buddy, calm the fuck down. Don't come calling bullshit without knowing crap. I said SNIPERS. It's a scenario field and our snipers are only allowed to shoot at +300 ft distances, shorter than that, they have tippmann pistols. and yes they do shoot over 450fps, most have modified tiberious arms snipers.
DarthWater7 1 year ago
@DarthWater7 i highly doubt anyone is shooting 450+ fps. you'd literally be shooting your bolt out through the barrel.
SamiDullard10 1 year ago
@SamiDullard10 I already explained. Not going to keep wasting time on you deaf retards. Call it BS, Go right ahead. I don't give THREE SHITS.
DarthWater7 1 year ago
@DarthWater7 impossible there is absolutely no way a marker is able to shoot over 350, here at tech pb we have many markers and we tested it no maker or woodsball marker we used and tested was not able to surpass 450. company's would not allow to go that high for legal reasons. and every field must have a limit also for legal reasons
steelebart 10 months ago
@steelebart "here at tech pb" ? Hahahahahahahahahahahahahahahaha, you wish! Funniest thing I've ever heard. Learn how to determine a troll (:
DarthWater7 10 months ago
@DarthWater7 Thats just retarted anything over 300 is messin' up the trajectory of the paintball. there is no way your gonna "SNIPE" at a velocity like that. the best velcoity is around 285
TheDustynMoore 10 months ago
@DarthWater7 thats bs, all fields have regulations, they might not enforce it but they have regulations
EatSomeBagels 4 months ago
@DarthWater7 the velocity increase isnt the effect you want. it's that the velocity increases because with the same amount of air as with the stock bolt, the gun shoots at a higher velocity, meaning that you need to lower it back down to where you had it with the stock, therefore cutting off some air, therefore increasing air efficiency
Myaccount25 10 months ago