@razorcz911 ... on the setup that you can se on this movie ~ 220km/h / 135 mph ... but now I have light flywheel and shorter gearbox, so I think it would be around 200-210 km/h / 125-130mph
a pytanie skrzynie z przedzialu 1993-199x sa prawie identyczne z budowy zewnetrznej ? prawie do kazdej mazdy ? bo ja mam 2.0 mx-6 94r i chcial bym troche z dluzszym przelozeniem skrzynie wsadzic ale nikt nie potrafi mi pomoc Wrr :} sadzilem ze z xedosa wrzuce ;]
nie wyszlo by cie taniej i efektowniej wlozyc kl-ze ? 2.5 200koni ? bo jak czytalem artykol to wpizdu roboty dla mnie zajebiscie dobrej zrobiles :) mi by sie nie chcialo tak bawic :] no ale za to masz silnik igielke :)
@szumki44 ... nie wiem czy taniej. Zdecydowanie latwiej bawic sie w R4 niz przekladac 1/2 auta w celu dostosowania do V6'tki. Mam nadzieje, ze po zalozeniu krotszej skrzynii bedzie to jechac na poziomie porownywalnym ze zdrowym KL'em.
@mazdafreakmx6 no, my friend had changed the rev limiter by changing the quartz frequency in ECU ... the guy who was tuning my piggy-back ECU Master computer is now working on my ECU to do the same thing ...
@mazdafreakmx6 Yes, you're right. I have gearbox from FP engine which is noticable longer than FS one. I'm planning to SWAP the tranny and take some weight from the stock flywheel also. Rev limiter will be soon advanced to over 7000rpm.
@zhopel 13BHP in 1.8 FP engine. I haven't measured the gain of -ZE intake cam itself in FS engine, but it should be similar. I gained 36BHP with both intake cam from -ZE and exhaust cam from CS mounted in ported head, stock block with -ZE pistons and custom exhaust/intake.
where did u get the guage rings from??
Peter24397 1 month ago
And your maximum speed is? :)
razorcz911 6 months ago
@razorcz911 ... on the setup that you can se on this movie ~ 220km/h / 135 mph ... but now I have light flywheel and shorter gearbox, so I think it would be around 200-210 km/h / 125-130mph
lukas626 6 months ago
What year is this mazda where could you get that dash
Kintosol89 7 months ago
a pytanie skrzynie z przedzialu 1993-199x sa prawie identyczne z budowy zewnetrznej ? prawie do kazdej mazdy ? bo ja mam 2.0 mx-6 94r i chcial bym troche z dluzszym przelozeniem skrzynie wsadzic ale nikt nie potrafi mi pomoc Wrr :} sadzilem ze z xedosa wrzuce ;]
szumki44 9 months ago
@szumki44 jezeli masz 2.0 FS do zakladaj skrzynie od 1.8 FP (mysle, ze do MX'a podejdzie bez problemu)
lukas626 9 months ago
@lukas626 - z kad kolega jest ? :)
szumki44 9 months ago
nie wyszlo by cie taniej i efektowniej wlozyc kl-ze ? 2.5 200koni ? bo jak czytalem artykol to wpizdu roboty dla mnie zajebiscie dobrej zrobiles :) mi by sie nie chcialo tak bawic :] no ale za to masz silnik igielke :)
szumki44 9 months ago
@szumki44 ... nie wiem czy taniej. Zdecydowanie latwiej bawic sie w R4 niz przekladac 1/2 auta w celu dostosowania do V6'tki. Mam nadzieje, ze po zalozeniu krotszej skrzynii bedzie to jechac na poziomie porownywalnym ze zdrowym KL'em.
lukas626 9 months ago
@lukas626 do you use a chip to change the rev limiter like the v6's.
mazdafreakmx6 11 months ago
@mazdafreakmx6 no, my friend had changed the rev limiter by changing the quartz frequency in ECU ... the guy who was tuning my piggy-back ECU Master computer is now working on my ECU to do the same thing ...
lukas626 11 months ago
if your car had alittle shorter gearing i think that would be a noticable difference.
mazdafreakmx6 11 months ago
@mazdafreakmx6 Yes, you're right. I have gearbox from FP engine which is noticable longer than FS one. I'm planning to SWAP the tranny and take some weight from the stock flywheel also. Rev limiter will be soon advanced to over 7000rpm.
lukas626 11 months ago
what difference is betwen standart and JDM FS-ZE intake camshaft?
zhopel 11 months ago
@zhopel 13BHP in 1.8 FP engine. I haven't measured the gain of -ZE intake cam itself in FS engine, but it should be similar. I gained 36BHP with both intake cam from -ZE and exhaust cam from CS mounted in ported head, stock block with -ZE pistons and custom exhaust/intake.
lukas626 11 months ago
nice, very nice :)
barren44 1 year ago