Hey guys, who ever getting the black screen when you plug your PS3, I found a solution.
Previously if you used an HDTV with HDMI, you PS3 will be set to HDMI mode, which means if you use the RCA cables on easycap, it wont work.
Hold down your PS3 power botton for about 10 sec and it should reset to RCA cables instead of HDMI. It took me 5 hours to figure this out and felt stupid when I did lol
the thing is if u using u ps3 on u hdmi cable u will need restart the ps3 holding the power button , so the video conf comeback on the lowest possible !
whenever i open easycap viewer it gives me an error saying that there is no easy cap connected but my easy cap is connected? I'm so confused is mine fake?
hey, I have an easycap which is working with S-video...whenever I record my gameplay, the source dimensions is 720 x 405...How can I change the actual source dimensions to 720x480 without actually doing any editing to stretch hte video to 480...I want the original video to record in 480 which easycap is capable of. Any help appreciated! thanks.
Ok some of you are having a problem that i posted 4 months ago ok well i never found out how to get it to work for mac but i did get it to work on windows and all i can say is dont waste your time on this the captureing lags and very bad quality the easycap is cheap for a reason if you really want to make it good you can also connect your xbox to your laptop/monitor via hd cables or buy a capture card just search around on youtube and you will find some helpful tutorials.Hope i helped. Good luck
do you need your console to be hooked up with the splitters for your mac to recognize it? because i currently have it hooked up to my mac and it wont recognize it
SO basically you just buy that easy caap thing and plug the video av cable from the easy cap to the ps3 and you use the driver on your mac and you can use it as a screen? or you need to connect it to your tv? help please thanks
When i setup my 360 i cannot get actual menu, I see it but it is like really bad quality that is black and white and the quality is to where you cannot even read it. I am using just composite to composite with no splitter need help
Ppl.. Of course this will force you to use the monitor as the screen for your console.. Unless you have a video splitter.. The purpose of this is so you can record gameplay and put it on YouTube.. I use it to convert old VHS tapes to DVD.. Anything with RCA or svideo will show up on your computer.. And YES if you are a Mac user, you need the audio splitter.. Ppl ask such dumb questions
can someone please help me i plug the cables in and everything open easycap viewer and hit play and it shows a black screen and nothing else please help will subscribe
@TehFoxzz I believe the Dc60 and Dc60+ work equally on a mac. I believe the programs most effective would be iMovie HD and Pinnacle Studio (mac version)
@TehFoxzz Hey friend, and no problem. I would like to add to this to help you. Dc60 works on iMovie HD, the Easy Cap Viewer and Pinnacle studio . Dc60+ works on iMovie HD and Pinnacle studio. But there are a lot and a lot of programs out there that capture the video :)
@TehFoxzz That's where they're trying to trick you. I have a mac too. USB 2.0 means nothing, USB is USB. I use a combination of Pinnacle, iMovie HD and EasyCap Viewer. The product was just intended for Windows XP/7/vista but can be used on mac :)
so i got mine yesterday and it worked fine yesterday. but today for some reason it made random loud sounds when the program was on if i clicked something. i still need to get the sound working, i have a seperate cable but dont have speakers that allow me to plug in the splitter thing and my imac settings are a bit different, used LineIn for mac but the sound is weird.
what is the audio splitter exact name? because I found different ones with different colours now I don't know what exact type of splitters is the one you used
if you can't find the option to switch your output to input on your mac it means one of two things, 1. your mac doesnt support using the port as an input (macbook air). or 2. your mac has an actual dedicated line input port AND a headphone port. use the line in port for capturing audio.
@TheSuperGlitcher i have just set mine up you need three x2 female rca to x1 male rca and one x2rca female to x1 3.3mm audio jack. i hope this helped :)
i have mac but i have the easycap dc60 but cd wont open up for mac.... is there any possible way of me using a download to be able to record with dc60?
i downloaded the program but when i click on it, it says You cannot open the application “EasyCapViewer” because it is not supported on this architecture."
Hey guys, who ever getting the black screen when you plug your PS3, I found a solution.
Previously if you used an HDTV with HDMI, you PS3 will be set to HDMI mode, which means if you use the RCA cables on easycap, it wont work.
Hold down your PS3 power botton for about 10 sec and it should reset to RCA cables instead of HDMI. It took me 5 hours to figure this out and felt stupid when I did lol
Cheers!
yusukeaoki1234 1 hour ago
the thing is if u using u ps3 on u hdmi cable u will need restart the ps3 holding the power button , so the video conf comeback on the lowest possible !
thumbs up so everyone can see it !
henriquenarave10 2 weeks ago
DO i have to have the splitters for it to work?
BulletsModz 2 weeks ago
@BulletsModz no matte just to get nice audio
henriquenarave10 2 weeks ago
are you series i got everything and the one thing i didn't buy is a splitter!!!!!!
LuXuRii987 3 weeks ago
whe i plug my easy cap in a light doesnt comeup
DasFlawless 3 weeks ago
whenever i open easycap viewer it gives me an error saying that there is no easy cap connected but my easy cap is connected? I'm so confused is mine fake?
antfou2 1 month ago
you know any way to make videos with a smaller size??
xBlackStormBR 1 month ago
Good work...
xBlackStormBR 1 month ago
does it work for DC60+
RooneyBwuv99 1 month ago
@tannerapp My penis
SoSxGriFfSaLuTe 1 month ago
my easycap wont turn green (the button) and i bought it and it came yesterday
TeamCakEGaming 1 month ago
Could you view it on photo booth or fcp instead
spyshocker 2 months ago
hey, I have an easycap which is working with S-video...whenever I record my gameplay, the source dimensions is 720 x 405...How can I change the actual source dimensions to 720x480 without actually doing any editing to stretch hte video to 480...I want the original video to record in 480 which easycap is capable of. Any help appreciated! thanks.
aaronarman89 2 months ago
@aaronarman89 I have the same exact problem.
to make matters worse, whenever I upload it to youtube, it downgrades it to 360p and video looks like crap...
serginietor 2 months ago
@TempestaHD Could you help me with this?
yourmouse1 3 months ago
EasyCapViewer Doesent Detect my EasyCap HELP!!!!
yourmouse1 3 months ago
@YSclan IKR
TheCodSqueezer 3 months ago
@YSclan That is what happens to me. If you found out how to fix it can you tell me
SeaniHD 3 months ago
when i click record it lags can i solve this problem?
Brentgoesipodtouch 3 months ago
my xbox does not show up on the easycap viewer D:
kevindakameradude 3 months ago
Actually, the Audio cables do work (MacBook Pro 13" 7,1, EasyCapViewer, OS X Lion, Wii).
UltimatePisman 3 months ago
guys im using a mac and everytime i click play i get a highpitch noise and a black screen
macuser1232 3 months ago
Ok some of you are having a problem that i posted 4 months ago ok well i never found out how to get it to work for mac but i did get it to work on windows and all i can say is dont waste your time on this the captureing lags and very bad quality the easycap is cheap for a reason if you really want to make it good you can also connect your xbox to your laptop/monitor via hd cables or buy a capture card just search around on youtube and you will find some helpful tutorials.Hope i helped. Good luck
tannerapp 4 months ago
do you need your console to be hooked up with the splitters for your mac to recognize it? because i currently have it hooked up to my mac and it wont recognize it
MDGMostDopeGaming 4 months ago
do you have to have your console hooked up with the splitters for your mac to recognize the easycap? because my mac wont recognize it.
MDGMostDopeGaming 4 months ago
SO basically you just buy that easy caap thing and plug the video av cable from the easy cap to the ps3 and you use the driver on your mac and you can use it as a screen? or you need to connect it to your tv? help please thanks
PipeH09 4 months ago
Great help!
araulie 4 months ago
@TempestaHD I am having the same problem as him.
guineapig081 4 months ago
im not getting any video at all. i get a scratched up version if i go to 50 Hz. what do i do?
Motachwa09 4 months ago
HELP... i have the easy cap pluged in but the green light doesnt even turn on
Rubst3r21 4 months ago
man how i downlord the driwers ???
ps3hack2011 5 months ago
Great stuff, working very well.
Cheap solutions :)
diomogyi1 5 months ago
@tannerapp turn on your ps3...
TheMackew 5 months ago
hey i have a MAC 10.4.11... what software is compatible?
Rubst3r21 5 months ago
Did u insert a disk into your laptop to download/install the program?anyways i used a thumb drive to drive it, will the tutorial still work?
Rewmoo 5 months ago
dude ur way too fucking awesome!!!!
iHarry99 6 months ago
i need help when i connect it all i get is black window with a play button plz help me
luis619c 6 months ago
whats the splitter called?
TheDiamondApple 6 months ago
can you send me a link to where you got the easy cap and the splitter thing?
TheDiamondApple 6 months ago
When i setup my 360 i cannot get actual menu, I see it but it is like really bad quality that is black and white and the quality is to where you cannot even read it. I am using just composite to composite with no splitter need help
pownagerokr22 6 months ago
How is the quality for ps3
PROANISH 6 months ago
@Beastyjames23 all i did was went on my desktop it does work on windows for sure but dude the quality is horrible
tannerapp 6 months ago
i love you, with windows neves do this in any computer
eonzeus 6 months ago
Can You Do Another MW2 Test ! ?
BestMw2TrickShooting 7 months ago
hey..... all i get is a black screen and a high pitch sound i don't no what to do please help will sub
SXSupermanSX 7 months ago
@tannerapp
SXSupermanSX 7 months ago
Man but the quality is like crap
yourick1812 7 months ago
Ppl.. Of course this will force you to use the monitor as the screen for your console.. Unless you have a video splitter.. The purpose of this is so you can record gameplay and put it on YouTube.. I use it to convert old VHS tapes to DVD.. Anything with RCA or svideo will show up on your computer.. And YES if you are a Mac user, you need the audio splitter.. Ppl ask such dumb questions
chriswtburke 7 months ago
@glove0102 on the newer MacBooks the headphone jack IS the mic input.. They are the same.. That's why he had to select audio input in settings..
chriswtburke 7 months ago
@11drow did you not watch the video he talks about that
chriswtburke 7 months ago
y is mine black and white
11drow 7 months ago
go die
SkySnakeMusic 7 months ago
@Meutainer hey can u send me a link for where to buy one, i cant find it on google :p
jake59rox 7 months ago
mate i love you (no homo) you just saved me about 100 to 200 dollars! thanx so much!!! im gonna buy an easycap hopefully tomorrow, i subbed :D
jake59rox 8 months ago
@jake59rox luckily i havent, thanx mate
jake59rox 7 months ago
My macbook doesnt have the "use audio port for" thing, please help!
ShuvitRewind 8 months ago
can someone please help me i plug the cables in and everything open easycap viewer and hit play and it shows a black screen and nothing else please help will subscribe
tannerapp 8 months ago 24
@tannerapp that happened to me too!
live4music112 7 months ago
@live4music112 were you able to fix it?
tannerapp 7 months ago
@tannerapp same thing for me
TheHDJonny 4 months ago
@tannerapp yo go into display and click on the last setting
pspking403 4 months ago
@tannerapp or you need to change the setings to pal or ntsc and composite 2 :)
Everydayisnipe 1 month ago
tried it... it just gives me a staticky kinda thing
TRFLweareok 8 months ago
DONT put it in your headphone jack put it in your microphone jack<<<< ive tried it and the headphone jack does not work
Glove0102 8 months ago
You're the best
xThePCGamerx 8 months ago
and this works today?
zExTremeHDz 8 months ago
Comment removed
zExTremeHDz 8 months ago
Can you still record your voice with Sound Input turned on?
JodyOnToast 8 months ago
Good video. Can I use this as a webcam input? Thx
FB045 8 months ago
Could you also use screenflow instead to record gameplay
Hardyfan87 9 months ago
Is there any lag in the video
Hardyfan87 9 months ago
the driver crashes after 5 minutes of recording :(
iMAWtalibanana 9 months ago
im sorry but why dont you connect your ps3 audio cable to easycap??? why do you connect it to the splitter??
jellymanjo1 9 months ago
@jellymanjo1 because it has to go into computer also.
KingHuevos 9 months ago
i need a splitter now, what should i look up on amazon? (is there a technical term?)
mrctab29 9 months ago
@mrctab29 Male to Female splitter
KingHuevos 9 months ago 2
@mrctab29 I think they're called 3.5mm RCA adapters/splitters. I think - can't be sure.
JodyOnToast 8 months ago
ok question? my easy cap light doesnt turn on? does that mean it broke before it got to me?
maycogt 9 months ago
what is the technical name for the splitter?
mason1348 9 months ago
This has been flagged as spam show
@mason1348 Male to Female Splitter.
KingHuevos 9 months ago
why do different countrys have different color?????
iFORAi 10 months ago
Do you have to play on the Mac instead of the television?
ShuvitRewind 10 months ago
PLZ answer this. does the normal easycap thats only work on pc, can u use it on macbook? :)
TehFoxzz 10 months ago
@TehFoxzz I believe the Dc60 and Dc60+ work equally on a mac. I believe the programs most effective would be iMovie HD and Pinnacle Studio (mac version)
PwnersDuo 10 months ago
@PwnersDuo K thx :)
TehFoxzz 10 months ago
@TehFoxzz Hey friend, and no problem. I would like to add to this to help you. Dc60 works on iMovie HD, the Easy Cap Viewer and Pinnacle studio . Dc60+ works on iMovie HD and Pinnacle studio. But there are a lot and a lot of programs out there that capture the video :)
PwnersDuo 10 months ago
@PwnersDuo k but i have the USB 2.0 and works the usb 2.0 on mac? cuz on the information it says windows xp/7/vista
TehFoxzz 9 months ago
@TehFoxzz That's where they're trying to trick you. I have a mac too. USB 2.0 means nothing, USB is USB. I use a combination of Pinnacle, iMovie HD and EasyCap Viewer. The product was just intended for Windows XP/7/vista but can be used on mac :)
PwnersDuo 9 months ago
@PwnersDuo Ok ,thx dude :)
TehFoxzz 9 months ago
so i got mine yesterday and it worked fine yesterday. but today for some reason it made random loud sounds when the program was on if i clicked something. i still need to get the sound working, i have a seperate cable but dont have speakers that allow me to plug in the splitter thing and my imac settings are a bit different, used LineIn for mac but the sound is weird.
PoetryonMusic 10 months ago
Good stuff can you do a tutorial in settings for Australia?
EFFEkT32 10 months ago
plz answer- do i need splitter???
zLukeez 10 months ago
Any lag on the computer screen ?. until i get a monitor for my room i wanna use my ps3 on my laptop's LED screen
clonecommander07 10 months ago
Any lag ?
clonecommander07 10 months ago
thanks so much dude you helped me out a lot
Laser211521 10 months ago
can you go full screen?
TRFLweareok 10 months ago
wen i plug it into my mac it doesnt light up ....help!
AKSoldier1 10 months ago
Can I have a link to that splitter?
Jordan6072 10 months ago
This has been flagged as spam show
when i try to open up easycapviewer it says that it doesn't support dc60+
redcat211 10 months ago
when i try to open up easycapviewer it says that it doesn't support dc60+
redcat211 10 months ago
@redcat211 Yea. It doesn't.
GuitarStarFive 10 months ago
i neeed to use video glide because ive got a mac 10.4.11 :(
iMaCTVx 10 months ago
how do u do the sound for mac desktop? when i record theres no sound and i use turtle beach
casedilla333 10 months ago
help. mine says dat it doesnt support DC60+ so i dowloaded videoglide and doesnt recieves it either can some one help me
KroNiiX1000 10 months ago
Do you even use your tv?
tchunu 11 months ago
EasycapViewer doesn't acknowledge it's plugged in. The light on the easycap flashes, though.
Malkintosh 11 months ago
so you cant play on your tv you have to play on the mac screen?
zPARTYPOOPERz 11 months ago
@zPARTYPOOPERz I think you have to get a few more cables if you want to do that...
CorporalGoogoo 10 months ago
dude can u plz msg me back, do i need a splitter to record? if i dont need one, what can i use?
zGregoz 11 months ago
when i try to record it cuts the bottom half and puts it at the top of the video?? please replay if you know what i need to do!
xFacePlantZ 11 months ago
where can i get dc60+ software for mac?
ChampChong 11 months ago
thanks man im now going out to buy easy cap and a sound adabter then im oging to come back to your video.
XxMESSIBOYQ8xX 11 months ago
I have an older macbook..so that drop-down when I click "sound" isn't there. So I don't know how to get the audio to work.
techn9cian4life 11 months ago
how do you get the ps3 screen to show up mine wont do that
HOCKEYCRAZYJ 11 months ago
you can afford a mac but you still use an easy cap?
lTheRealDealGamingl 11 months ago
ChampChong sent me
einartorkelsen 11 months ago 18
@einartorkelsen hey i watch ChampChong wat video did he send you??
PenguinMan360 5 months ago
you could build a pc twice as good as a mac for half the price! but oh wait, it wont have a shiny apple on it :(
jSNATCHGRABv 11 months ago
you only need all this bullshit if you own a mac :P
jSNATCHGRABv 11 months ago
what you do for the screeching sound you click on the easycap veiwer and go to preferences and go to volume and turn it all the way down
frankosaurus009 11 months ago
@frankosaurus009 no
ThePingpongdemon 11 months ago
@ThePingpongdemon It works i use it
frankosaurus009 11 months ago
the audio wont work even with the splitter
randomnoyz 11 months ago
@randomnoyz
Did u go into system preferences and change the default audio to input?
ZephyrnixLive 11 months ago
does it laggs on a macbook white when you play?
zeewoldemovies 1 year ago
Sum of my Screen Is at the top Im not sure why But Can you help me or contact me On Jatin_dhillon@hotmail.co.uk or phone me 02087580897
xiVJVlaGiiKxS 1 year ago
when i press play the screen is black too...
kmastar13 1 year ago
When i press the play bottun it dosnt respond..
umomisdead 1 year ago
thanks for the help bro. i'll post a link o the zombie video i'll record with it. my buddy and i are going for level 60. take it easy. :D
TS
smeltzthe5th 1 year ago
my screen just stays black
PostVideoGamesReport 1 year ago
Is it lag? coz I plan to buy easycap instead a TV for my PS3
Perfectgammer 1 year ago
do you plug in the end from your system or the end from your tv if you want to record form a xbox?
mikedaballer15 1 year ago
Did all that and video appears, but i can't get sound or colour, can anyone help?
itsjasonjamie 1 year ago
@itsjasonjamie sorry ive just got it in colour, still having trouble with sound
itsjasonjamie 1 year ago
what is the audio splitter exact name? because I found different ones with different colours now I don't know what exact type of splitters is the one you used
TheSSpeed 1 year ago
Download easycapviewer
kardklubkid 1 year ago
whilst your playing the game do you watch it through the tv or the laptop
ACSeason 1 year ago
WHAT PARTS DO I NEED??
sidekick257 1 year ago
how come this doesnt work for imac
totallytechstuff 1 year ago
does this mean you have to you have to watch your mac instead of your tv whilst recording/playing
adamdiemond12 1 year ago
@adamdiemond12 not if you buy splitters so you can connect one to your mac and one to your tv like the ones in this video
watch?v=rAUdxytNn6A
goman175 1 year ago
@goman175 ahh ok thanks very much :)
adamdiemond12 1 year ago
@goman175 is that the same as the small splitters he has for the audio thing or is that different?
adamdiemond12 1 year ago
my video capture screen is blurry and has a black line at the top and the bottom of the screen is above that black line
Any help
chunkyman94 1 year ago
if you can't find the option to switch your output to input on your mac it means one of two things, 1. your mac doesnt support using the port as an input (macbook air). or 2. your mac has an actual dedicated line input port AND a headphone port. use the line in port for capturing audio.
chump1039 1 year ago
Does not work with my EasyCap DC60.
I have the latest MAcBook Pro, OS X 10.6.5
Maybe its Apple again messing things up.
I Keep getting a warning saying "No supported device found"
Anyone else having this problem?
Cheers, Alcyone
Alcyone53 1 year ago
@Alcyone53 SAMEE
JUubiMGO 1 year ago
i did this step by step but when it came to open up easycapviewer it said it couldnt detect the capture card??
TMWoIverlne 1 year ago
does it work with hdmi?
mezzanoind 1 year ago
what is the spliter called?
sidekick257 1 year ago
im conufzed, whats the splitter called cos i cant find it on amazon
eXiiCFuZe 1 year ago
do you need splitters for this or just the audio one replay back please
TheSuperGlitcher 1 year ago 3
@TheSuperGlitcher yes u need some
sk8fresh22 10 months ago
@TheSuperGlitcher i have just set mine up you need three x2 female rca to x1 male rca and one x2rca female to x1 3.3mm audio jack. i hope this helped :)
357nopbop 10 months ago
Great Tutorial!
SebastianBergenwall 1 year ago
Comment removed
TheSuperGlitcher 1 year ago
This has been flagged as spam show
my mac dosnt have the option to change the input to output please helpp
aandtproductions230 1 year ago
my mac dosnt have the option to change the input to output please helpp
aandtproductions230 1 year ago
So with these settings will it lag at all
pwnmael 1 year ago
do u need to use the white and red cables if you dont want audio?
GrannyzPOP 1 year ago
So do you use your TV to play or computer?
xXxredwafflexXx 1 year ago
i have mac but i have the easycap dc60 but cd wont open up for mac.... is there any possible way of me using a download to be able to record with dc60?
xxxodeexxx 1 year ago
I have a Mac Mini, i dont have the input output shit, what do i do ?
BOGamePlays 1 year ago
I dont have the option to change input to output.... how can i fix it?
xSketchh 1 year ago
do u lag online
Diwwan1 1 year ago
what do i do if im using a mac desktop (imac) for sound imput output thing
MrKingbeaver13 1 year ago
Comment removed
MrKingbeaver13 1 year ago
Hey, can I buy this from a casual store? I don't trust purchasing online.
KRiZZxTV 1 year ago
i have done what oyu have said and evry time i click play nothing happens
j3wc3b0x 1 year ago
how come when i record itl lagz?
kamery19 1 year ago
@kamery19 this happens with me ass well
Corka58 1 year ago
The light for my easycap doesn't come on when i plug it into my computer is this a problem?
JackieBrown48 1 year ago
Buy an S-video. The quality on the S-video is extremely amazing.
toontownlegomaster 1 year ago
i downloaded the program but when i click on it, it says You cannot open the application “EasyCapViewer” because it is not supported on this architecture."
mgw31660 1 year ago
@mgw31660 ik me 2 and idk what to do
ktmracing711 1 year ago