INTENSAFIRE - Official Instructional Video

[harrymad11]

is this good and how much is it

[BGRMods]

@harrymad11 the intensafire 3.0 is 34.95$ plus shipping.... you can find them on our site bgrmods.com.... and yes they work amazing

[harrymad11]

@BGRMods ok i might get one thxs for a response

[deathknight6524]

@nilesdragons69 3.0

[OLIXSWE]

in the userprogamble mode how to i set zero?

[BGRMods]

@OLIXSWE you mean turn the mod off? if this is what you are asking then you just have to sycle through all the modes and then your mod will eventually turn off once you cycled all the way through. hope this helps, thank you

[gizzod678]

ok so well i bought 2 of these and i tried one but it doesnt work it goes to one player and does nothing after think its the sync ??

[BGRMods]

@gizzod678 please contact our customer support email... chris@bgrmods.com and we will be able to help you with the problem. thanks

[nilesdragons69]

Which do you think is better for mw2, intensafire 3.0 or 2.0

[BGRMods]

@nilesdragons69 the 3.0

[WIGGZPLITTA]

How much does it cost?

[BGRMods]

@WIGGZPLITTA visit our website and you can see all our products and there prices thanks

[thatkilladexter]

Can't wait for mines to come :D woot woot!'

[TheBay51]

Me too

[mamsterman1000]

This will help me for me when I get mine in the mail

[HentchRuNzXBL]

When i press the Sync button the intensafire turns on and then goes through all modes until it turns off. Help pls?

[CsMxiKabooM]

whats the difference between the versions like v1-v3

[Schlabiiee]

Sigh,great customer service won't help you what so ever..they tell you to go buy more shit,instead of answering my question.never buying one of your products again.

[ToxicityZombie]

@Schlabiiee the glue they give is just ordinary conductive glue. wire glue should work perfectly for this

[Schlabiiee]

@bgrmods will it work or not.....

[Schlabiiee]

@bgrmods I have regular wire glue.I bought a intensifire board off eBay and it came with only the board.will the wire glue work instead of this conductive glue?the glues black...it's like carbon that's conductive or some shit

[BGRMods]

@Schlabiiee you should use the glue that we give you with the intensafire or solder it

[BGRMods]

@Schlabiiee go to bgrmods.com and you will see our store link at the top of the page and you can purchase one there. thanks!

[btfutyler]

to turn on the mod its left trigger for me :( why?

[BGRMods]

@btfutyler not really sure to be honest, maybe the way you installed it.... it still works and everything right?

[xKINGxM]

Btw I have a CG controller

[xKINGxM]

Ok. I glued down all the points and I dryed it with the blowdryer but then when I tried to go into mode one it didn't light up.. any idea of what I did wrong?

[JIGGLYsHoW]

Can you also make it three round burst

[JIGGLYsHoW]

Can you still sync it to the Xbox?

[BGRMods]

@JIGGLYsHoW yes you still sync it the same exact way as a normal controller

[HaCkErCrACk360]

what is the best mode for mw3 anyone. i have the 1.4 version

[BGRMods]

@HaCkErCrACk360 mode 1

[TheMadbrad98]

so if i bye this product will it come with instruction manuals?

[QuiXotiKViZioN]

is soldering better than gluing it

[1337blackman]

Can I solder it instead of using glue ?

[BGRMods]

@1337blackman yes you can solder it

[EL1T3xAC1D]

can i use my own glue?

[jessenjackie]

tight

[GARKize]

Yo it took mine around 2 weeks and 3 days for mine to come

I messed up my first intensafire and I am doing it again let's see what happens

[GARKize]

The sync button does not make the ring go orange either

[MAFFSMATCHATTAX]

Sorry what I meant was does the led analog and the rapid-fire work in the same controller

[BGRMods]

@MAFFSMATCHATTAX yes

[BGRMods]

the intensafire works for all shooter games... halo, gears, call of duty, and many others... it will work for it all

[MAFFSMATCHATTAX]

Does this work with the led analog one at the same time? Please answer

[BGRMods]

@MAFFSMATCHATTAX yes it does

[mackmoneymunoz]

@TheKrzystof because you didn't do it right.

[gageh524]

does it work for black ops and mw2

[BGRMods]

@gageh524 yes it works for all first person shooter games. it does work for all the call of dutys and it will work for mw3 as well. thanks

[TheKeyshon]

@BGRMods Hey how long does it take to get here i ordered one like a week ago and its taking forever

[GARKize]

I have seen and heard comments and reviews that the new black Xbox 360 controller is not compatible with intensafire 2.0. Is this ture??

I don't wanna waste money.

[BGRMods]

@GARKize NO it is NOT true... the intensafire WILL work for the black controller.... thanks

[Bmista1]

does it work on black op???

[BGRMods]

@Bmista1 yes it works on black ops and all the other call of duty games... and it will work for mw3 coming out

[NickTheGoon9]

Does this work for Halo Reach?

[BGRMods]

@NickTheGoon9 yes it works for Halo Reach

[BGRMods]

@CPCcontrollers it will work just for the wireless xbox360 controllers

[Glumdemise]

will this work for a wired controller

[xXxNE0NV3L0CITYxXx]

@Glumdemise No because the mod's modes are activated by using the sync button.

[LackJinks]

What about for mw2?

[BGRMods]

@LackJinks yes it will work for mw2 and mw3

[Einsteinmodz]

Can you provide a link of where you bought it at in Hong Kong?

Thanks

BGRMODS

[MischiefMakerDan]

Just bought this SUCKS ITS COMING FROM HONGKONG but oh well anyway can you use this on a new silver controller with the spinning d-pad

[laserscopeandholly]

Do u want the matrix or the other 1

[BGRMods]

@laserscopeandholly it really does not matter... the intensafire works great for both

[naqib127]

does the same apply if i hav a black coloured intensafire (2.0)

[BGRMods]

@naqib127 yes

[mlggamer1243]

can someone watch this video cause i need some help so thanx

watch?v=C20bmzdrTcg

[XxTurbineKillxX]

Hi im new to intensafire and how do i set it to the fstest possible mode for the fal on mw2 will 0 work with the fal and how do i set it to zero thanks

[hardrockman911]

will i be able to sync to other 360s? or will i have to stay on one console when i install it?

[BGRMods]

@hardrockman911 You can definitely sync it to other consoles. it will work just fine

[hardrockman911]

@BGRMods k thanks

[hardrockman911]

@BGRMods if it is matrix do i soder it to the black box and sync or just the black box? please help

[ImRicksterr]

i did it tonight and all my buttons are haywire what do i do helpppp i have a matrix

[BGRMods]

@ImRicksterr contact this email and he will help... chris@bgrmods.com

[xl3iGZEDx]

@BGRMods yo can i use a tesa glue? Not the original....

[JohnBlazeNY]

I'm going to try mine tonight..wish me luck.

[BGRMods]

@hay463 did you contact customer support? if not yet...email chris@bgrmods and he will help you. thanks

[Teamoose]

How long does it take to ship to washington?

[dusty6844]

if you have a matrix controller do you still need to glue the sync button or just the matrix part?

[johnchandler100]

i just bought it and tryed to install it my right trigger and left one wont work plz help!

[johnchandler100]

just bought this and now my right left triggers wont shoot and the mod led works but not the mod and my thumb sticks dont wriok plz help

[jspennington11]

will intensafire 2.0 work on a slim controller

[sulliedboot61]

i was wondering if the intensafire 2.0 is installed diffrent from the regular intensa fire

[familyguyrocks1233]

can you solder everthing else then when you get to the sync button glue?

[joejamfilms]

what speed is recomended for mw2 from 0-250 0 being the fastest please respond

[schabadas1]

could you get banned for this?

[joejamfilms]

what speed do you recomend for mw2 please respond

[kajukid23]

Whats a good setting for mw2



[DaveH218]

I purchased an Intensafire V1.4 on eBay. Will it work the same as in this video? Does it have a setting that lets it pull the right trigger and shoot on both sides?

[shaboobang]

Witch mode is it for mw2

[Bmista1]

can you have intrnsafire and Illuminating Thumbsticks pleas reply

[Bmista1]

does it work on black ops

[schabadas1]

can i use it for the wired controller? please reply

[BGRMods]

@schabadas1 no it wont thanks

[joejamfilms]

@schabadas1 i think only if u have a rezister or however you spell it a rezister is the big mettal thing in the middle of the controller but im not 100% sure

[schabadas1]

@joejamfilms if you notice you must use the sync button so i dont know

[AceIsManik]

were do u buy it

[BGRMods]

@AceIsManik bgrmods.com

[joejamfilms]

@AceIsManik or ebay for cheaper maby

[halodude960]

How long does it take to ship?!?! I've been waiting for two weeks

[REBALzombie]

can you turn the mod off?

[ar4nd0masain]

Hey can i put tape on the right and left side of the sync button to stop the glue from touching it

[BGRMods]

@ar4nd0masain you could try that while installing but leaving the piece of tape in the controller after putting it back together is not the best for it... thanks

[024jacob]

Does this work for mw2

[BGRMods]

@024jacob yes

[BeanJuiceDem]

Do you HAVE to take the all the peices of tape off. this way it will stay mabey a little longer?

[BGRMods]

@BeanJuiceDem yes you should take all them off

[monkeyhugger555]

Do I have to wait for the glue to TOTALLY dry before trying it? I've tried several times blow drying it for 10-15 on medium heat, and it still won't turn on. Any help? I e-mailed last night but no reply still.... IntensaFIRE V2... ANY SUGGESTIONS WILL BE APPRECIATED!!!

[halodude960]

Best thing to do is solder all the other points and glue the sync cuz it's the easiest part to screw up on and then you mess up the sync and cant use it.

[pmikk1]

does this come with the torx t8 security??

[RESILIENTZ]

Bgrmods you should make the sync contact a bit easier to glue( soldering it is pretty easy though)

[RESILIENTZ]

Put more glue on the sync for matrix it will help

[FaNaTiiCxMoDz]

can you help me i sccrewed up the sync button can you help plzz

[Jammer470]

masage glue packet?

[HotSweatySecks]

Could It be possible if you made a matrix controller walkthrough? I seem to be having problems with my controller. It would help a lot to most of us with this problem.

[BrianTheeFirst]

I see you using the computer please answer ill show a vid by CAMERA what happens

[BrianTheeFirst]

I sent it to Roseville and the sync disconnects and the left trigger doesn't work

[BrianTheeFirst]

Mine works but every time i automaticaly fire the sync disconnects from my xbox

[MrCalebful]

what website do i buy this at?

[BGRMods]

@MrCalebful bgrmods.com

[iloveme2723]

@JACKAKAH0T i have the same problem even with the intensafire kit now my sync button doesnt work, did you get yours sorted ?

[BGRMods]

@Mrpaperskate did you try contacting our customer support..... email this address: chris@bgrmods.com

and explain the problem....he will be able to help you out. thanks

[jfosheezy2]

mine is the black intensafire (it says version 2.0) is there a diffrence?

[TOMgotGAME]

i installed the intesafire correctly i believe, and when i press the sync button orange quater rings appear but the controller isnt powering on correctly. Another thing every button is working except for the right trigger. Can anyone please help i really do not want to break my controller!!! :(

[roryos]

I believe this mod does not work with the slim controllers i.e. matrix 2.0

[Mrpaperskate]

@MrEasyLoving

You mean nail polish remover? and I think I scratched the sync for the CG. So I'll try MATRIX

[MrEasyLoving]

Not "sinced" Sync!!lol

[MrEasyLoving]

@Mrpaperskate i had the same problem and what i did was i removed all the glue (used a nail polish) and fthe first one i glued wuz the sinced and after glue the 3 on the bottom and if it lights up ur all good so now glue the for right and left trigger!.

[BGRMods]

@MrEasyLoving email chris@bgrmods and we can help you out

[Mrpaperskate]

Okay I was super excited when I finally got the Intensafire, and I put it in a CG controller. everything was good except for the sync contact (which seems to be the biggest problem. I was able to hold it down and got the lights to light up. And I noticed my bottom two lights were orange not red, which was weird. so I finally got sick of trying and tried the matrix. same thing, everything went well but the sync. even when I hold it down, no lights light up. I would REALLY appreciate some help. I

[gsjunior514]

Does this still work for mw2 and cod4?

[BGRMods]

@gsjunior514 yes it does

[MetalRocks329]

@gsjunior514 it's adjustable you tard of course it is. what is with people and always asking that question.

[BrianTheeFirst]

If we mail it in so they can do it, do they put solder or the glue?

[xXCH1C4GOXx]

does this work wit the new gray controllers???

[BrianTheeFirst]

This mod is hard , the sync is so little

[BGRMods]

@JACKAKAH0T send an email to chris@bgrmods.com

[BrianTheeFirst]

how do i take out the glue bcause i messed up alcahol pad?

[BGRMods]

@BrianTheeFirst use nail polish remover to take out the glue

[W0lv3nShad3]

how do you put in the leds

[BGRMods]

@W0lv3nShad3 we have a LED installing video on our channel as well as our website so you can see how its done

[kiingnoiiz]

does this one work for mw2???? plz someone answer me fast

[BGRMods]

@kiingnoiiz yes it does

[jeroen4087]

@kiingnoiiz yeah man it works for al call of duty game its the best mod on the market !!!!!

[demon99088]

please help i have a matrix controller i did everything....it works without the shell on but wen i put the shell on it goess through the modes and wont stop so the mods dont work....plz help reply anyone thanks so much

[xryanb8705x]

So wait if I have a matrix controller do I have to glue 2 points in the sync area? One on the box that both CG and matrix controllers have(on the right) and one on the box only matrix controllers have(on the left)?

[MrEasyLoving]

@BGRMods ooh ok datz fine... Well igit everything fixed thnx to ur website and i really love this mod but compare to my other friends intensafire mine is kinda slow..

[Matteo96beviglie]

Well, if i need to sync my modified controller with an other xbox, how can i sync it?

[BGRMods]

@Matteo96beviglie same way you would sync it up to any xbox... just hit the sync button. thanks

[MrEasyLoving]

Is there any way i could get one for free?.If it takes me talking to people about how great this mod is, ill do that over xboxlive or so.

[BGRMods]

@MrEasyLoving no we do not give out free ones. sorry

[MrEasyLoving]

Ok well i got my problem fixed but now when i plug in my mic a really buzzing loud noise but only if the mod is turned on, which means i cant use my mod n mic at the same time=(( But pls help me!.

[FearlessSurvivor1999]

Can i solder the thing in?

[BGRMods]

@FearlessSurvivor1999 yes you can solder it

[ipodfoo]

oh man! i glued it wrong!! is there anyway to remove the glue?? 

[ipodfoo]

how do you know if you did every thing right before you screw everything back in??? and also my red light isnt light ....help???

[MrEasyLoving]

I got mine today and i got everything working n stuff but my cotroller's green light wouldnt turn on but the red light does n my controller does not connect to my xbox..Wut do u think is wrong? Everthing worlds except it wont turn on but the mod does soo yahh! Pls i need help!!

[BGRMods]

@MrEasyLoving go to our website and contact the customer support...someone will help you there...thanks

[99thematrix]

i wouldnt recomend kids doing this though.

[99thematrix]

oh yeah i did end up soldering though. only because think about it ask your self why would you glue with electronics its wet. you dont have to do it this way but you should.

[99thematrix]

wow!!! that was easy. the hardest part was getting the controller apart. it took three and a half minutes for the entire install timed it. less than what was predicted by the manufaturer which was 5mins.

[99thematrix]

wow!!! that was easy. the hardest part was getting the controller apart. it took three and a half minutes timed it. less than what was predicted by the manufaturer which was 5mins.

[jageram97]

it works, i have it, i got yesterday and it works, for the people that says it does not, be sure that the clue is mix and accurate

[BGRMods]

@deadlytrap71 you possibly used too much glue on the solder points and where the sync button is...this is a problem a lot of people have. email this address: chris@bgrmods.com and we will see what we can do for you. thanks

[deadlytrap71]

@BGRMods yeh but i ripped my flex board into pieces after it not worknig and me burning myself with a soldering gun multiple times :(

[deadlytrap71]

my controller is a TP3 does this mean anything??

[BGRMods]

@deadlytrap71 it will work just fine

[QsNsSnazzy]

does it work on mw2??

[BGRMods]

@QsNsSnazzy yes it works on all first person shooter games