EasyStar Brushless 600W Power

[stormracer2011]

wie weit ist die reichweite?

[PyR0Star]

i really wanna mod my easy star off stock, im looking for up to date mods to make it fly again. I stored mine for years not realizing a simple wire off the motor was the cause of not flying it.. Over the years, the batteries perform half assed, and I can't climb even 100 feet in the air but its still fun to fly. I got the RTF version, so I need a motor, esc, lipo & charger, I just bought the newer prop for a stock multiplex. Wish I knew more bout RC, I'd be ordering not ranting....

[francoishaha]

great pilot !!!

[MrPopracing]

Is that the stock motor or did u take it off and put a stronger one on ? Plz reply

[skyforceflightmodels]

@MrPopracing see description plz

[FesterBable]

@skyforceflightmodels Where in the description does it say if this is stock setup or not? I know that is isn't, but you don't actually say that. You could just be listing what came with the plane.

[Paxmax]

sweet stick control....

[willjed]

nice flying!!

made it look easy...

[whatnameainttakn]

amazing climb ability-that thing could embarrass most ducted fan guys.

[spOon2410]

this thing is nuts

[ehsanaman222]

The beauty of a glider... the vertical of a F-16.. love it!! ... LOLL

[Hurdiburdi1]

WOOHOOOOOOOO !!!! :)))

[towigri]

Wie groß sind die Querruder?

[tr4nscend]

What prop is it? Thanks.

[TheSliekaStyle]

what's next? twin motors? 1.2kW would be epic :D

[muffdriver69]

@TheSliekaStyle You probably clip the wings off at that speed.

[gewizz2]

i keep buying stupid cheap bl motors from internet.. u know the ones! 2200kv gold?

its stuttering and screaming on first try so maybe its the esc but i bet its th new motor broke from deal extreme. i just want 2 fly my god damn easystar. i keep spending cash and none of my rc sh it works! where the hell can i buy very good quality outrunners using paypal? hk doesent have any i dont think...fu ck! im gunna hav 2 wait 4 another order i havent even made yet!

[WalneySkyland]

@gewizz2 calm down, it's only a hobby ;-)

[gewizz2]

@WalneySkyland ..lol now now my plane and other vehicles work so im calm.

p.s RC isnt just a hobby...its a way of life :)

[Fetzenflyer]

tolles video aber eine frage hätte ich gern ist der easy star geeignet auch für anfänger weil ich habe ein Fox von Hype und der ist nicht grad einfach zu fliegen deshalb ist er einfach zu fliegen.... :D

[ComandanteJ]

for nature's god! that's what i call overkill, i LOVE it!

[MarcChep]

Crazy

[mega20092010]

Wieviel hat das insgesamt gekostet??

Ich meine den Motor und den Akku? den Flieger hab ich.

[djhoodski]

try 35c lipos m8 ;)

[bobbanis]

@ sweden217

Check movie Easystar brushless 200kv

[666drummerman]

how much would all the thing cost?

[mega20092010]

Super Video!!!

WIe lange fliegst du schon??

[xTvSxLaZer]

14 seconds... its 300 feet in the air. Haha

[0493112345]

Sehr schönes Video. Auch die Landschaft:)

[XFoolXProofX]

Cant wait to get mine. I messed up and got a Revo 3.3....swapped the motor after problems...many other problems...and I could have got a nice plane or helo for 1/2 the price.

[Galatsian]

i agree with skyforce ... i have a hacker 3600kv and a 3800kv from a Phase 3 EDF motor on my 2 EZs also..@singhparambir the poor 400 BRUSHED dies easily...i think multiplex should had a brushless from the factory on the EZ

[Galatsian]

stock motor dies not much time needed to go brushless i got a 3600kv on it as soon as the lame permax 400 died

[blackhawk438]

Brushless= Nitro

[HibridOPT]

@blackhawk438 Brushless > Nitro

[NightRunner417]

Nice plane and nice flying! You should name her "Angry Star", haha. :-)

[tenrazo215]

Did you have any difficulties getting the center of gravity correct with such a big motor? 

[Zzsmile]

I liked the low passes with the wingtips almost touching.!

[2015danteinferno]

that's why i don't buy airhogs because they are not meant to be for full season type of planes

[catamaranman333]

@2015danteinferno Dude, airhogs are toys....

[TimBurkhardt1992]

Ey das mit den vogeln ist echt nicht zum lachen ich bin mal lange im kreis geflogen da kamen so greifvoegel und bin beihnahe zusammengestozen die sind extra so nah ran weil die dachten ich hab thermik gefunden(aufsteihende luft) " hoer nur noch so ein aaaarrkkkk vom vogel " hab nochn vid. Davon lad ich vill. mal hoch!

[TimBurkhardt1992]

I have 400 watt but thats enought because then you can fly longer 400 watt is enought

Watt~ power of motor

[qrrak]

600W ?? I bet you even dont know what 600W means

[schl0tte]

@qrrak he prolly thinks he's a real pilot, too ;)

[simbajo1973]

very good video!!!!nice

[rufenit1]

Nice job on the ailerons. That must give the ES some rolls... Which Turnigy Outrunner, and how much Kv?

[jp00000420]

I though my 300W one was impressive. I bet that thing sounds awesome in real life.

[mYOwngUn]

Can you tellme which combination I should use on my easystar to get the best power and flight time ?

greetings

myowngun !

[BehindBen]

Haha, you make flying look so easy!

[7guitarihave]

that is one nice looking foamie

[ploetzlich30]

YEAH! Angreifende Elstern haben mit dem Motor keine Chance mehr! LACH!

[psindrup]

I would never have thought that an Easystar could fly like this. ;-)

[spyroth]

How did you get Ailerons on that EasyStar? Did you mod it yourself? 

[skyforceflightmodels]

@spyroth No, of course not! We wrote an email to Multiplex, asked them to add ailerons and a brushless motor especially for this one EasyStar, so 2 days later we received the plane ready built ;-)

[420choky]

nice



[ArthurLeandroMM]

hello friend. I wonder what the complete configuration of its multiplex easy star.

I want to know the model of the engine and kv, ESC speed, battery and prop measure?

If you know the total weight of it also pass me.

[boywaimea]

great how you installed the motor on your plane. was the motor larger then the hole. it looks like the motor was the same diameter and the hole were the original motor was. nice flight though and good job with upgrade

[boywaimea]

i want to try this motor in my easy star. with this upgrade, is the easy star more tail heavy?  nice flying and thanks for sharing

[indiarc]

thats a joke ... i get the same performance at 250w himax motor with 3s lipo

[rclark23]

Great sport glider with bawls/power,, nice piloting skills as well,, no way better to spend an evening, flying with friends

[Soaronex]

Did you glue the wings together?

[seanlee74]

warm the wing tips with a hair dryer and make them straight it makes a lot of difference.

[aramismax2002]

Great video. I have my easystar with a turnigy special series inrunner 2150kv (buid on Hobbyking). With 4s 2200mah and propeller 6x5 630watt and unlimited vertical. Fantastic. Great motor for easystar Turnigy inrunner 2150kv. Next my video

[CH1CKENQUIFF]

sorry im a complete novice, i dont yet own a plane. but how do you raise the wattage to 600w from 340w?

Sorry, it might be a nooby question lol

[altitudealchemy]

Cool video! I love the pass by the contrail at 1:12!

[Soaronex]

why outrunner and not inrunner?

[santatigerclaus]

whats the KV of that motor? i was sooo jealous when i saw this vid 4 months ago- i wanted my wildhawk to fly good  so i put a 2208-8 (2600kv) 11.1 2800 30C 30A esc and ailerons, and threw away the SDM 27MHZ and its all good - overpowered planes rock !

[singhparambir]

Hi nice one. But tell me one thing. Why should one replace the original humble brushed motor of easystar which draws just 8 amp and can give you a much longer endurance for the same battery pack? Let us leave aside the life of the motor.

[skyforceflightmodels]

That´s because 600W is slightly more power than 60W of the original motor. If you fly that motor with 10% throttle you will have the same performance and even more flight-time, due to better efficency and less weight. Beside, do not fly the stock motor with 4S LiPo!

[Sweden217]

@skyforceflightmodels

what motor is it? and what ESC? really nice vid by the way!

[Sweden217]

@skyforceflightmodels

Would a Easy star with a Turnigy Inrunner 2835 2200kv be good?  would it be fast?

[tziki123]

hii

can you tell me what is your configuration to the easystar?

[skyforceflightmodels]

@tziki123 see description plz

[skyforceflightmodels]

@tziki123 see description plz

[grzy3]

WOW.

4s li-poly and 50A ESC, WOW

[paulkazjack]

600watts???thats a tiny little e max outrunner with a max currant rating of 15 amps mate.

[skyforceflightmodels]

No, thats a Turnigy Outrunner, factory rated with 350W (35A) and long-term tested at 600W with about 40A. Some brushless motors look very similar, but the size matters.

[ehsanaman222]

@skyforceflightmodels -- Can you please post the link to the specific motor and ESC? Thanks mate!

[skyforceflightmodels]

@ehsanaman222 see description plz

[muffdriver69]

@skyforceflightmodels what kv?

[skyforceflightmodels]

@muffdriver69 1700kv

[justfly60482]

nice flying add video camera too it.

[siusiful]

cool

[TheFaberge]

Это не планер. Это прямо реактивный самолет!!! Слишком большой запас мощности по движку!!!

[STOPGLOBALSTUPIDITY]

This is it. EPO planes with Hi Tech motors (brushless) Hi Tech LiPo power. No reason to buy a nitro plane. You can get 1200 watts brushless. Add 2.4 GHz multi channel with video and you have it all. Multiplex got it right!

[miamicanesfan01]

Awesome flying. These little planes are so much fun, and for $400 bucks you can have the fastest little easy star out there. I just set mine up with a 3000kv brushless inrunner 45 amp esc and a 3s 2600 lipo the thing screams. I cant even go full speed the thing starts shaking at about 80 miles an hour.

[maynardr6]

What's up not posting the specs? Obviously everyone was going to want to know. Looks like a Turnigy outrunner to me. Anyone care to guess which one that size can handle 600 watts?

[IQ150s]

i´m using a 5,5/4,3 Graupner Speedprop

[Slaschow]

My Easystar has 280W drawing 15A with a 5.5x4.5 APC on a 3C 2200 25C Lipo. And it is impressive i cant imagine 4C with 600W nice work!!

[pudd750]

what prop is that? looks extreme -7x5?

[pudd750]

just getting my daily fix of watching this super hawk- thank you - snow is a nice runway- itll be here in a while

[pudd750]

no ailerons?

[pudd750]

sweet - i just had my first controlled flights with my wildhawk today - it needed the battery moved forward as far as it would go - the problem is it becomes helplesser in wind, so i hafta watch for calm and drop everything to fly, cuz calm is rare - getting my toes wet in this hobby, see if i can do it -IT IS FUN!!

[pudd750]

two (2) touch and goes that day!!!!!! jettisonning the 8.4 tho, for good, forever - cant wait for perfect calm

[1ghostdawg]

what motor and esc are you using?

[IQ150s]

i got the same setup but with a 4cell lipo 14,8 volt and 5000mAh and a 7x4 prop

[pudd750]

hows that setup doing? sounds like it screams

[drypipe1]

Can you tell me:

1. Which size Trungy 1700 motor you used? (C????-1700)

2. mAh 4S lipo?

Thank You

Drypipe

[drypipe1]

I dont know about 600W? 600W of power is equivalent to a .25 glow engine! But I guess this must be true? What are the numbers on that Trunigy motor? C????-1700?

[drypipe1]

Hobby City has this C3530-1700 motor but they list the Watts at only 340W? and on your website, you list the same motor as 600W? What is the difference with these motors?

Drypipe

[skyforceflightmodels]

it´s exactly that motor, but we did a long-term test at 600W on 4S and it´s still alive after 1,5 years rough flying!

[JamAsianz]

@skyforceflightmodels

How much was this bought for and where was it bough?

Thanks,

[aramismax2002]

@drypipe1 Great video. I have my easystar with a turnigy special series inrunner 2150kv (buid on Hobbyking). With 4s 2200mah and propeller 6x5 630watt and unlimited vertical. Fantastic. Great motor for easystar Turnigy inrunner 2150kv. Next my video

[cruddneck]

sir240s is wrong. it is an outrunner, not an inrunner, dumbass

[AssemblerAVR]

What Brushless motor do you use?

[andawawego]

Something tells me you have done this once or twice before.

[Algarcon1]

WOW incredible flight!!!!!!!!! You´re a genius

[miamicanesfan01]

Awesome flying! Just got my first easy star yesterday. Hope to fly like you one day. Keep up the good work.

[michelcamargue]

WAOU!!! les ailes sont renforcées ou pas...impréssionnant la montée...SUPER

[angrygunsmith]

crop the wings a bit?

[brihoo2k]

Wow thats awesome make me rethink about getting an easystar

[achilles22382]

how many volts is your Lipo? and how did you get clearance for the 7 inch prop? i didnt see any cuts on the aft fuselage.

[achilles22382]

wow, just watched it again. INCREDIBLE! it takes off faster than my estes model rockets!!!!!! also, where did you get that prop? and if it is a 6" prop, why didnt you have to cut into the aft fuselage/boom for prop clearance?

[achilles22382]

that is just insane.  im in the process of buying all of this stuff to make my easy* like yours.

is that a turnigy motor? which one?

thanks man, any tips you could give would be awesome. that is some nice flying

[sir240s]

that is a innrunner not a outrunner =) enjoy

[jonzzey]

Ha Ha! thats insane!

[carlosthecactus]

Nice plane and flying!

Did you use carbon to reinforce the main wings and if so what type (3mm rod? 1x10mm strip?). I ask because the wings on my 250w easystar bend a lot during loops and tight turns and I am exploring what is the best solution to reduce it.

[Zerts2]

Great flying skills - inverted and rolls close to ground!

[JRBeaman]

SWEET!

I have heard this is THE plane to get, amature, or pro because you can do so much with it.

ENJOY!

[1971linus]

well made modifications - nice flight & cool location/light !!!

what prop dimension did u use + how many rpm you get at full speed?

[skyforceflightmodels]

the prop size is 7x6, rpm at full throttle is unknown, this motor has 1700 kv if that helps

[lulu67480]

salut je voudrai s'avoir si sur le easy  star on peut couper le moteur pendent le vol.

ET bravo pour la video

merci

[studeman404]

Awesome flying man, brushless upgrade and ailerons make all the difference ........good job mate.

[zhunter1025]

Nice flying. I like the added ailerons very cool.

[wildhover]

looks like that thing would fly even without wings!!!

[horizonflyer9]

geesh whats the power/weight ratio on that!? 18 to 1???

[skyforceflightmodels]

lol 18/1 would be nice. No, it´s just about 3/1.

[horizonflyer9]

still thats a lot! its practically a rocket

[paulkazjack]

Nice flying!