On this one it is, Main winding solid wire is 5 turns, Small winding around main is 7 turns, The long winding is 13 turns with the wires from the 7 winding going through it with the solid wire as well.
On some engines you may have to reverce the connections on the wires to get it to work. You may also need to add a turn on them or remove a turn on one and add a turn on another. It depends on the application to the type of engine you are using.
As I understand it, you are using the battery and coil to break the water down to hydrogen and oxygen which is combusted in the motor. Are you claiming to generate more power than is depleted from the battery?
The battery is used to start the motor not to supply it with extra power to break the water apaart. The coil is to slow down the fire going to the plug so the engine will fire the plug when needed, and to boost the amps at the plug the battery supplies power through the coil to a useful object as a light or small electric motor used on the vehicle if applied to such. The other post here can explan most of this.
How many turns were in the longer coil? This thing IS the V.I.C. coil of Stan Meyer. Took me a minute to figure it out that way, but it has all the criteria of the V.I.C. stated in the patents. VERY VERY VERY good job and Thank you. S1R
How do we know this is the real s1r9a9m9 and not some fake. The original text to s1r9a9m9 concluded he ran a camaro on water, now he is showing a small motor running on water? I'm confused.
Its amazing how all of a sudden the plasma spark is taking people away from researching the original water fuel designer. Which was Stanley Meyer. Which clearly we should continue to be researching.
If he is truly s1r9a9m9 where is the water-car, the original camaro? Otherwise I'm forced to call you out.
Thanks alot there s1r...your coils is well quite abit different then the other one I pulled off of the yahoo group..thanks for the vid and clearification...
This is so funny watching you reviel your secret, but i have one question, why, itf you can turn by electricity water into HHo and then let it explode, this does not happen when there is a thunderstorm and lightning? would there no be a big bang with lighting and fog?
This is happening in an enclosed area. not in the open. in an open area you can see what lighting dose but in a closed space it reacts deferently it has force and pressures that can be used for work. It is not seperating into HHO. air, water , and electricity are combined at a time when they can be subjected to a charge that will cause a reaction. It is controled and contained lighting that causes the pressure to use as workable energy release.
Also the reaction of lighting makeing HHO dose happen in thunder storms, read up on the new reports done by real scienctest and think about it the next time you walk out in the rain. Its realy cool how the release of lighting occures. Now makeing it in an enclosed area and getting it right and timed to do what you want when you want it, ant to easy. It dose strange things when it wants to.
Didn't realize my reply wouldn't be posted directly under the comment it pertained to - that was directed at tjeerdG.
Thunder is the sonic boom caused by the rapid expansion and contraction of the air in and around the plasma channel that is lightning. With that much force in open air, imagine how powerful it could be if it happened in a closed environment. Both sides of the reaction could potentially be used together to drive a piston, giving two power strokes instead of one!
Thanks for the video, S1r. Just one question - is the "tail" of coil 3 that you refer to connected to the battery, or to the lead from coil 2 as I think?
Is there a schematic for this posted anywhere? Thank you for sharing. What modification did you do to the spark plug (remove the resistor0? Thanks again!
Can you show this working connected to a bare sparkplug on a bench or table top?, it will help alot to see a working circuit with all the connections and also give an idea of the size of spark to expect with a working circuit.
waterfuel 1978 in yahoo groups. There are others there that have very good ideas that need to get around the world. come post with us and look through our files and links and photos, and see what you can do.
A photo of the car running will not show any proof that it runs on water. And My wife still drives it cross country from GA to CALF.
To rebuild the coil just play the video backward. or wind some wire round a ink pen and make sure its tightly wound. the long 1 has a tail back through it.
HI THERE S1R9A9M9 ,Will you be posting your ignition set-up with a standard V-8 disributor, inverter, 8 coils in box ,step -up coils ,wiring diagram , or a updated circuit that actually runs a engine on water with-out the relays ! Thank-you for your voluntary efforts & information you posted !
Yes , I have a new system that I am working on that dose not involve relays or coils at all. Its a hydrogen reactor that produces H H O gas on demand.
Thanks for showing it to us. I can't quite make out what it reads on the input lead (with hook)that says "From ca? ? on motor". Is it cap as in (distributor cap)? Also does the constant power usage device output(red wire) have to be using power or can it be off or is it simply a ground? I see a ground sign under the circle so I'm a lil confused.
Hello,
Is the spark plug factory or did you modify it?
Is high amperage used to create the needed force?
Are you ever going to show your 350cid engine running on water?
Thanks for sharing..
biggysground 1 year ago
how many time does everything need wraped?
TheNicknewbie 2 years ago
On this one it is, Main winding solid wire is 5 turns, Small winding around main is 7 turns, The long winding is 13 turns with the wires from the 7 winding going through it with the solid wire as well.
On some engines you may have to reverce the connections on the wires to get it to work. You may also need to add a turn on them or remove a turn on one and add a turn on another. It depends on the application to the type of engine you are using.
s1r9a9m9 2 years ago
a drum break spring i gues that would make a good core
prototype9000 3 years ago
As I understand it, you are using the battery and coil to break the water down to hydrogen and oxygen which is combusted in the motor. Are you claiming to generate more power than is depleted from the battery?
67George 3 years ago
The battery is used to start the motor not to supply it with extra power to break the water apaart. The coil is to slow down the fire going to the plug so the engine will fire the plug when needed, and to boost the amps at the plug the battery supplies power through the coil to a useful object as a light or small electric motor used on the vehicle if applied to such. The other post here can explan most of this.
s1r9a9m9 3 years ago
How come nobody was ever able to get any results from this coil??? Hmmmmmmm can you say hoax??
nxslt11 3 years ago
@nxslt11 It works, just not very well. S1R spend 2 weeks trying to get the wiring right
SergeHumphrey 1 year ago
HI S1R9A9M9 When is Video 4 going to be released ?
davejoson 3 years ago
How many turns were in the longer coil? This thing IS the V.I.C. coil of Stan Meyer. Took me a minute to figure it out that way, but it has all the criteria of the V.I.C. stated in the patents. VERY VERY VERY good job and Thank you. S1R
flipster12000 3 years ago
How about a clear explanation of how to build one ourselves and test.
pacifichydrogen 3 years ago
How do we know this is the real s1r9a9m9 and not some fake. The original text to s1r9a9m9 concluded he ran a camaro on water, now he is showing a small motor running on water? I'm confused.
Its amazing how all of a sudden the plasma spark is taking people away from researching the original water fuel designer. Which was Stanley Meyer. Which clearly we should continue to be researching.
If he is truly s1r9a9m9 where is the water-car, the original camaro? Otherwise I'm forced to call you out.
sirHOAX 3 years ago
Hello S1R,
It is not clear to me if you did any change to the timing on this motor. Did you?
(p.s.: Thanks for coming back on the net)
FeelFree888 3 years ago
thats a pretty good size cat you got their
dudleyengineering 3 years ago
Thanks alot there s1r...your coils is well quite abit different then the other one I pulled off of the yahoo group..thanks for the vid and clearification...
seriescell 3 years ago
This is so funny watching you reviel your secret, but i have one question, why, itf you can turn by electricity water into HHo and then let it explode, this does not happen when there is a thunderstorm and lightning? would there no be a big bang with lighting and fog?
tjeerdG 3 years ago
This is happening in an enclosed area. not in the open. in an open area you can see what lighting dose but in a closed space it reacts deferently it has force and pressures that can be used for work. It is not seperating into HHO. air, water , and electricity are combined at a time when they can be subjected to a charge that will cause a reaction. It is controled and contained lighting that causes the pressure to use as workable energy release.
S1R.
s1r9a9m9 3 years ago
Also the reaction of lighting makeing HHO dose happen in thunder storms, read up on the new reports done by real scienctest and think about it the next time you walk out in the rain. Its realy cool how the release of lighting occures. Now makeing it in an enclosed area and getting it right and timed to do what you want when you want it, ant to easy. It dose strange things when it wants to.
S1R.
s1r9a9m9 3 years ago
What do you think thunder is? God snoring?
bigclumber 3 years ago
Didn't realize my reply wouldn't be posted directly under the comment it pertained to - that was directed at tjeerdG.
Thunder is the sonic boom caused by the rapid expansion and contraction of the air in and around the plasma channel that is lightning. With that much force in open air, imagine how powerful it could be if it happened in a closed environment. Both sides of the reaction could potentially be used together to drive a piston, giving two power strokes instead of one!
bigclumber 3 years ago
Thanks for the video, S1r. Just one question - is the "tail" of coil 3 that you refer to connected to the battery, or to the lead from coil 2 as I think?
ricko414 3 years ago
Is there a schematic for this posted anywhere? Thank you for sharing. What modification did you do to the spark plug (remove the resistor0? Thanks again!
terrydeannelson 3 years ago
Well its either all BS or its something INCREDIBLE !!
Whatever the answer ..Im glued to watching and cant wait to see the next video installment.
How about seeing the coil hooked up and firing a plug on a bench.
Lets see the plasma glow
Cheers
quasarhi 3 years ago
Can you show this working connected to a bare sparkplug on a bench or table top?, it will help alot to see a working circuit with all the connections and also give an idea of the size of spark to expect with a working circuit.
Please post a link to the yahoo group.
Thanks.
Lakes57 3 years ago
This is great! Will inspire people sick of fossil fuels to do something!
Thanks for posting this s1r9a9m! I am working on some circuits on a V/8 which were made available on your site.
HHONOW
HHONOW 3 years ago
waterfuel 1978 in yahoo groups. There are others there that have very good ideas that need to get around the world. come post with us and look through our files and links and photos, and see what you can do.
A photo of the car running will not show any proof that it runs on water. And My wife still drives it cross country from GA to CALF.
To rebuild the coil just play the video backward. or wind some wire round a ink pen and make sure its tightly wound. the long 1 has a tail back through it.
s1r9a9m9 3 years ago
Are you still going to make a video of the entire set up together?
Thank you HV
happyvalley808 3 years ago
YES.
S1R.
s1r9a9m9 3 years ago
HI THERE S1R9A9M9 ,Will you be posting your ignition set-up with a standard V-8 disributor, inverter, 8 coils in box ,step -up coils ,wiring diagram , or a updated circuit that actually runs a engine on water with-out the relays ! Thank-you for your voluntary efforts & information you posted !
ftjkomet007 3 years ago
Yes , I have a new system that I am working on that dose not involve relays or coils at all. Its a hydrogen reactor that produces H H O gas on demand.
Video 4 will be about it.
s1r9a9m9 3 years ago
Great video. Sir1 an you please take a video footage of your car? we would like to hear the engine idling sound and RPM
dreamyear 3 years ago
thanks for new video, can you do an other putting the coil back together
nomoegas 3 years ago
Thanks for showing it to us. I can't quite make out what it reads on the input lead (with hook)that says "From ca? ? on motor". Is it cap as in (distributor cap)? Also does the constant power usage device output(red wire) have to be using power or can it be off or is it simply a ground? I see a ground sign under the circle so I'm a lil confused.
1BIGBIT 3 years ago
It says :
From Coil On Motor
FeelFree888 3 years ago