How to make an arrow!

[zarithevill]

Thx this help alot, now i can be a maniac that love to shoot arrows to people knees.

[TheCrazyphuck]

how to make a(n) arrow

[MrAtomo500]

I used to shoot arrows, but then I took an arrow to the knee

[LetechiHrast]

@MrAtomo500 You should never came here

[MrAtomo500]

@LetechiHrast I used to come here but then i took an arrow to the knee

[bowman6611]

@MrAtomo500 why does everyone use this joke if i had a penny for every time i saw this id be a millionaire with thousands of arrows so i could shoot you all in the knee

[MrAtomo500]

@bowman6611 its a skyrim joke p.s. i used to be a millionaire, but then i took an arrow to the knee

[Xafiny]

so good

[PBlifestyleforever]

9 people cant make arrows!

[PBlifestyleforever]

i am going to like this because you spent your time and made a valid effort!

[brandonneace]

An arrow, not a arrow

[MISTERROCKET123]

he said shaft

[marioplayer50]

YOU SUCK BALLS SACK HOE



[themanboob11]

why spend a hundred dollars on equipment to make sort of good arrows when you can spend fifty dollars and buy ten professionally made arrows

[Guitararcher]

@themanboob11 I'd like to know where you are buying 10 professionally made arrows that are not made in the same fashion as I've made mine . . . arrows that are pre fabed are not professionally made they are factory made, and finally you can spend the money up front and spend half as much to make the product, or you can just keep paying for someone else to do it with limited customization . . . its just like reloading ammo, its not for everyone

[timmer2223]

@themanboob11 where can you get ten good arrows? I would very much like to know! where i live arrows are thirty for three decent arrows, and upwards of eighty for GOOD ones.

[siciliancara]

@themanboob11 I make my own arrows and they fly better then any arrow you can buy. companies save the best shafts with the straightest edge for the builders.

[SaschaHeylik]

how long does it take to glue one fletching?

[Guitararcher]

@SaschaHeylik about 5-10 mins . . . they make instant stuff, but I don't care for it that much . . . thats just me though

[ilikepieto19]

ewwwwwwwwwwwwwwwwww



[Zardikar94]

can you just tell me what is that straight thing ? the neck of arrow ? where did you get that ?

[Guitararcher]

@Zardikar94 hmm I'm not quite sure what your referring too??

[MrJcoop98]

@Guitararcher he is getting at the shaft i think... hopefully

[Guitararcher]

@MrJcoop98 lol I'm thinkin so too . . . dicks, cabelas, even wall mart will carry them . . . but if you want some good quality customer service, and one heck of a good price check out 3 Rivers!

[mjyankeedude]

I understand this is a simple process to follow, but its not like everyone has this equipment lying around

[Guitararcher]

@mjyankeedude if you want to make quality arrows this is the equipment you will need to get . . .

[BrEeDiNgxRePs]

hey man could you message me on everything i need and were do u get the saft or how do u make it



[SammyCronin]

What materials did you use?

[ragingtubster]

you can just go to bass pro shops and get an arrow for 6 bucks

[Guitararcher]

@ragingtubster I'll pay you 10 bucks if you can find an exact arrow set up like mine at bass pro shops . . . its all about personal customization . . . some people are fine with same jane stuff . . . . other people like to make their stuff unique and that's what I'm all about!!

[zeidamaster]

Are that fucking carbon?

[MrCarrothead86]

Thats not fine grit! It's 320! Use some 1000 or something. Holy cow, the agony!

[Guitararcher]

@MrCarrothead86 been using it forever, never had a problem . . . thats fine to me, you should see what I sand new shafts with, lol.

[pinolikescheeseidont]

your equiptment is freakin hard to get

[Guitararcher]

@pinolikescheeseidont which equipment?

[sengfar964]

sheesh, call me old fashioned, but all i want to see is using a knife, some wood, feathers, and hand crafted flint/metal arrowheads, made like in the olden days

[jacksoncole79]

Great video. Alot of my freinds have subscribed to you because your vids are so great. Some of them dont even shoot haha. So when is the tuning vid coming out?

[KiboshProductions]

you should look into primitive fletching with turkey feathers, and a question do you do flint knapping?

[Guitararcher]

@KiboshProductions not yet . . .

[MrKrazykeegs]

thanxs for the help just some more question the fleching jig dose it now were to put the cocking feather like i mean do u have to just now where he cocking feather goes?

[Guitararcher]

@MrKrazykeegs On the knock there is a little notch that shows where you are suppose to put it

[Spazzmazatastic13]

1:24 it jizzed!!

[MrKrazykeegs]

hey man good video.. the brace inserts what are they for?

[Guitararcher]

@MrKrazykeegs hey thanks. The brass adds more weight to the front of the arrow. With a higher percentage of FOC(front of center) penetration is increased roughly 20 percent. Hope that helps, if ya have anymore questions about it, just message me:)

[Magnageek]

Hey, very nice video; thanks for posting! One question: Is it okay to use epoxy for inserts? Is hot glue better or even necessary?

[Guitararcher]

thanks man, that stuff I am using is a epoxy, and as far as I know the hot glue works just fine but I have never used it, the stuff I use works and if it aint broke I generally dont fix it, lol

[Guitararcher]

thanks man, that stuff I am using is a epoxy, and as far as I know the hot glue works just fine but I have never used it, the stuff I use works and if it aint broke I generally dont fix it, lol

[primitivepathways]

Sweet dude!! I've never seen that fletch dry stuff. Does that stuff make your feathers waterproof? If so, I need to get some. You taught me something new! YEAH!

[Guitararcher]

waterproof? Definatly not, but that stuff works great, it is water resistant for a good while in heavy rain. lol

[curveshooter]

Good stuff...love making arrows, next favourite thing than shooting my curve

[Guitararcher]

It is the little feather chopper, it works well. You can find it at 3 rivers, it comes in several different shapes and sizes, however. I really like that new bearpaw chopper, no mallet needed, looks like you just push down on the lever in the front and it chops them. The biggest thing I like about that one is that you can change out the different plates for different sizes or cuts?

[CombatArchery]

Cool Funny ending...

[AntiHuntersLoveMe]

Good job man, that was really cool to see.

[Primitivearcher13]

dude this is soo sweet just the sort of thing ive been waiting for!! imma go out and get supplies 2 make my own arrows!!

[burkerock03]

Eh how much all together is one arrow ?

[Guitararcher]

$5.59

[flintrocks]

Nice video! i just have a question. Im using a 55 pound Martin recurve bow, Not sure what kind of arrows to use? Like the weight/grain or whatever. Mind helping me out ?

[mrwhitetail1994]

wht types of shafts u shoot

[Guitararcher]

Beeman ICS bowhunter shafts, those are 400's, but I shoot 340's and 500's in my other bows. Great shafts, cheap and tough as nails!

[Bowhunter82393]

thanks for the help never made my own arrows but im gonna make soem flu flu arrows soon thanks this should help alot