newman motor replica runs on 4x 9volt batteries

[brentbps1]

Have you set this up to recharge the source batteries, like Newman's own motor? He seems to have constantly shown that he could start with almost dead batteries and within a short time, these same batteries would be running the unit and also be fully charged. What would be the difference in the circuit,. Thanks.

[Timofo23]

Cool video sir, the only thing I don't understand with all of these newman motors is that nobody does any work with their motors. The reason we have motors is to do work for us. Have your motor turn a fan, a pump, or something to put a load on your motor. Otherwise it's just a cool looking spinny thing. Just a suggestion.

[valveman12]

You cannot maintain the load so no it is not more power out than in. If you were to measure the power in and power out, you will find you need more power in than out. You have not demonstrated anything. As soon as you connected that bulb, the voltage dropped as expected. That bulb would not glow bright for long. You don't get something for nothing. I'n not trying to be mean but you need to learn more about electricity.

[lookingOK]

where do i get plans for the newman motor?

[byjoveoldchap]

Raymond you are doing a fantastic job and your videos in particular have encouraged me enough to want to build one. I have never built an electric motor or understood electronics sufficiently enough to try. However, I have NOW built my very first Newman motor and I am totally amazed with the results. I urge anyone who is interested to JUST DO IT! Stuff the TV and use your brain cells and your own creativity to experiment and play. This is so simple it's crazy! - Thank you again Raymond.

[byjoveoldchap]

Want to build one? - Find a pair of old loudspeaker magnets, the ordinary ferrite one's work great, and search for a suitable shaft complete with two bearings. Recover some magnet wire from thrown out items as RayOenergy does and get a suitable piece of plastic downpipe. Thats all you need to built a motor. Listen carefully, you do NOT need transistors, diodes, capacitors or resistors to build a working Newman motor.

[byjoveoldchap]

My motor runs on a single ONE and a HALF volt AAA battery and the speed is absolutely incredible...!!! I have video which I KNOW would totally blow people away, but I haven't a clue how get it online, thats how 'clever' I am! --- So PROVE it to yourself, have a go, there are many people like Raymond who are trying their damnest to wake people up to the truth and spend a good deal of their time creating these videos to help us. Please, do something useful with your time and give them credit.

[seshkanuri]

How much is the output amps?

[malik966]

its true !! MY GOD !

can you please teach me how to make one ?!!

[crippled82]

so the secret is that the lamp lights up using those batteries and motor, which is not possible if the lamp is connected directly to batteries?

[kudortamas]

Why don't you connect those 8 capacitors in parallel, charge them up with the 4x9=36V battery. Then, connect the charged capacitors in series + to -

You'll get 8x36=288V that will burn out your light bulb and maybe give you a nice shock, too. :)

I believe these motors work but your video is doing a poor job at showing what the motor is all about.

[FrustratedRanter]

Not sure if you are aware of the bedini "school girl" energizer, but it too is quite fascinating...Under testing of my replication I was able to obtain a COP of 12 meaning 12x more energy out than in, plus the motive force of the rotor. These two men have been working quite hard on their devices and I believe they both should be given much respect, however we must always remember NIKOLA TESLA, cause w/o him we would be in the dark...literally

[ray0energy]

yes i no bedini to but Newman is one of them that no of this stuff

[kwinterburn]

very interesting except for the obvious that the skeptics will only believe when you can run a useful (plus 1000 watt) load forever, anyway why any batteries at all would not a sub coil and diode bridge/cap work with the rotating mag field to generate enough power to replace the battery ?

cheers keiththeengineer

[ray0energy]

i try to get there but my intention is not to make a close loop try that wit a water fall and u will end up wit 0. but if u put it into baked (or battery) and then bring it back. SO NO CLOSET LOOP we live in a open loop system!!

and i do this work not to proof i do i t becaus I believe in it and it will work for all of us. so for the skeptic that suffer from DISBELIVE and hafy mind control (discovery channel mainstream media) let them be! de will find out soon

[ray0energy]

it all have to do wit trimming af the commutator. and it is not 50% on and 50% off. it don't have to do wit current reversal. it is 20% on and 80 % off. good luck

[ray0energy]

Ps: a good tip for bilding a newman motor.

use a good balanst flyweel this is realy inportant to inproof the motor. a car motor also need 1

[ray0energy]

it all nice small stuff i like it a lot. but fore home fun use.:-) my next step Will bi more!! volt not 1.5v it Will maby run but wat can u do wit it? my goal is to make 1 that i can put on my bike and make more km than djust pedaling. sins i life in Spain wit all this mountain's. well Anny way good luck wit the mini version. ps: i am currently working on a mosfet drive commutator wit optic Hall effect switch no more sparks ad the commutators more radiant energy to collect :-)

[TheB3e]

thanks for sharing your results!

[garynolan1]

Great tabletop example of Newman's energy machine technology. Good work!!