Declare IHC Forks Installation

[qrscapital]

y do u need sealed threedless headset y not unsealed

[MyJEM6500]

what do i need to if i want to put a pkhoenkix smooth compression system on it

[kiblits23]

I wanted to know...is the blunt deck you have a good deck that will last for a while. Iv been looking into buying one but i heard they break REALLY easily!! What should i do. I have a district now. So whats better district or blunt?

[TheIMightyBroMi]

i have this compression and when its all together and as tight as it can go and my bars are on my topcap wobbles and makes a ratttle noise . help?

[FATALJDM951]

You explained that very well you helped me alot on my scooter thanks :)

[129iphone]

I have this fork and i have a little trouble with it, for some reason my bars keep on getting loose from the fork so ill be riding it and then realize that the wheel isn't facing the right direction. I really don't know what is going on so i have to keep on tightening the compression so now when i tailwhip it is super slow and doesn't spin fast at all. Please help, I have standard razor ultra pro bars by the way

[TheLethalScooters]

@129iphone wot clamp usally a four bolt clamp like the blunt/envy one is best

[MiNiScoots069]

So you dont need the top Dusk cap is it better to use it with or without it

[lilow95]

@EnvyScooters Do the forks come with a smaller compression ring or d you have to use a blunt headset?

[xAwesomeTom]

Oh and does this work with the max peters bars?

[xAwesomeTom]

Can you PLEASE answer this, does the compression ring come with a intergrated headset

[MBSCOOT]

Works this fork to the district bar

[EnergySoSerious]

whats cool is this is the compression used for their completes and it is such a smooth compression

[PhsycadelicScooters]

do these fit mgp decks?

[abelscooter]

So this fork fit with almost all bars? any kind of bar?

[dylannscoots]

omg that deck

[MrScooterguy101]

does the deck need to be intergraded?

[The4Scooges]

I think this was a great idea, I'm sick of having to use scs clamps I dont like just to be able to use the standard bars I like. I'm not a fan of ics, so this makes that no longer a problem. Please keep the good ideas coming!

[97mitchell97]

are you able to have it with scs clamp

[LBERR8]

does it come with the top cap because the headset top cap doesnt fit

[coreytrann]

do you need a starnut or anything?

[IcyCannon]

one question that i need you to answer, everything that he put on the forks and the deck, does that come with the envy declare forks?

[almostsk8er46544]

i have only had theses for forks for a week and they are just complete pooop i will never wast my time with blunt parts again....

[redback888]

i got these forks yesterday they are really nice! so far i would recommend them

[TheNicoMonkeys]

Wath is Song ?

[Influence157]

The only problem is its a pain in the ass to get the shim out of the bars it gets stuck all the time.

[jokerzyo]

just got my declares on my scoot awsome

[lilnikester]

lol its stupid. same with phoenix TLC. I love both these companies but if you know how to adjust you scs hic or ics properly no other compression type is necessary.

[LPfilmsHD]

Do they fit Integrated headsets?

[NachoTac0]

@LPfilmsHD he's using an intergrated headset in this vid so yes.

[justinsnoble]

housos at 1.40 reppin the thongs

[thanhnio69]

anyone know if max peters bars are standed sized bars?

[AJWFilmProductions96]

@thanhnio69 yes they are, envy don't do oversized.

[TheNoahRoberts]

in jandles, good cunt!

[TheBrodzie]

@envyscooters i have a problem my top cap (bolt) came undone inside my bars and so my big black dust cap (or whatever u called it) is stuck in my bars CAN U PLZZZ HELP AND REPLY!!??

[rickwoodscoots]

it's a pain in the ass, it won't tighten properly, it's always loose my axle on the wheel keeps falling out, the shim gets stuck in the bars, and now my dust cap is stuffed because the compression ring scrapes, and lastly it smells like shit

[NachoTac0]

@rickwoodscoots 1. learn how to tighten things.

2. learn how to put a wheel on / tighten things

3. take the extra paint off the inside of the bars as seen in this video

4. who cares

5. get over it pussy

[DEWscoots]

gd vid but do they work with the intergrated district headset

[tomsk8s999]

my friend has this and you specifically said fits all pro model decks of all kind madd gear razor etc. my friend tried to put it in and since the headtube is so short, the top cap doesnt compress the bearings. so you lied and he cant afford a new deck because the envy forks cost him everything. so you need to not lie because you have wasted his money.

[MrBmxalltheway]

can the new forks fit mgp deck and normal bars?????

[andrescoots13]

can you use any head set for that deck and compression ?

[skaterdean0]

but is it dialed?

[tbone18j]

what deck is that???

[RohelinePatarei]

1 question: WTF IS IHC

did u mean HIC?

[EpicScooterFlicks]

@RohelinePatarei integrated headset compression

[14OziRiS14]

fork tube ist too slim or its only my view ?

[EpicScooterFlicks]

@14OziRiS14 it is slimmer because the IHC fits standard bars so they had to make the fork and shim slim

[14OziRiS14]

@EpicScooterFlicks i know but it is strong like normal fork ?

[EpicScooterFlicks]

@14OziRiS14 gotta w8 and see how riders handle it you never know

[flawlessalpha]

do you have to have a blunt quad clamp to not have the top cap?

[MrScootyBee]

is that a aos v2 or envy deck

[Ruthersboy15]

@likesubscribers55 Yes they do or internal threading either way you don't have to install threading.

[MinneyyGamertag]

who noticed all the mgp boxes behind him

[JMPscoots4life]

people have already snapped these and they have only just came out ????????

[chathamscooters]

this is actually so sweet

[chequeredturtleninja]

do u hv to have the integrated deck



[IRideScooters12]

Have these and they are pretty damn good they also look madd.

[estrnbtch]

My bars went on super super tightttand now I can't even get them off. I had to use a rubber mallet to get them all the way down.. Do you have any idea how I could possibly get them off without damaging my bars?

[Tanboards]

@estrnbtch rubber mallet i have the same problem and i works

[estrnbtch]

@Tanboards Alright thanks dude!

[DudDMaNNZzZ07]

will they work if i have overside bars with a shim in the bars aswell?

[scooterguy899]

NICE HIC :/

[skatebmxmaaaaan]

what kind of deck? is it integrated?

[curnscoots]

i the deck and forks soo bad :|

[toddjamin]

Hate it. why intoduce another type of compression (which isnt really a new type, your not fooling anyone) into an industry that is struggling to get a foothold in standardization. this adds nothing to the SCS and HIC standards we have currently and is purely to give you a monopoly on this for blunt.

[EnvyScooters]

@toddjamin We are innovating an integrating technology to improve the sport and its products for the riders benifit. we saw SCS to be complicated -Modification of bars and forks in most cases just to make the clamp works. HIC use of oversized bars then have to purchase additional clamps, bars etc. The IHC was designed to use your bars and clamps that you already have while using a fork that is light weight, looks great and is easy to use. We believe all sports need to evolve and progress.

[michaelchavezzz]

@toddjamin actually it is quite the opposite. for a long time people have had to either buy new bars(for hic) or new forks and a proto, or any scs(for scs) which costed alot of money. or they could run threaded with their standard bars or buy new forks and use crappy ics. now you dont have to do that, only buy a fork with this compression and done. its the goodness of hic with the cost of buying a fork for ics. its genius ive been waiting a long time for something like this, i applaud blunt.

[tomsk8s999]

@toddjamin shut up you try and invent a new compression

[toddjamin]

@tomsk8s999 i dont think you grasped the meaning of my post. my whole argument was that we already have perfectly good forms of compression, and that adding another further dilutes the market, confuses buyers and gives us more missmatching parts. i feel it perfectly reasonable to put forward a thought out stance on the matter, and therfore will not "shut up" and think that you should put some more thought into your comments.

[tomsk8s999]

@toddjamin you have no wright to rip off their inventive compression system. Ypu can ask questions but you can't bag their products like you could make a new compression and it works perfectly with most bars and deck. So i think their isnt much wrong with it and nobody does either. You are wrong and get off this video. Stop watching stuff if your going to rip on them.

[liamfossaluzza]

@toddjamin your hating on blunt for this good idea but not hating on phoenix for TLC? threads on a threadless? wow

[J4CKW1LK3s]

@toddjamin dude i have this compression and is by far the best yet its so easy and you dont hav to worry about any specifactions its alot diffeent and is so easy to get it dialled

[cobrascooters]

@ScooterLowrider heres the reason why i think i broke, because off the integrated hic it make the wall thickness signification weaker so yeah thats about it

[snazzyscoots]

You didnt mention the part about getting your bars off. To get them off i have to get a large bit a wood and slam it on the underside of my for a while. Has anyone on the envy team had this problem?

[SoberBobPaulFilms]

@snazzyscoots I have problems taking them off and on too :(

[jamesscootfilms]

@snazzyscoots dude this bars not the fork you need to strech the slit in your bars

[WeEatDryCereal]

WHAT, DECK. 

[RemboScoot]

@WeEatDryCereal Blunt AOS v2 "street"

[12345Name54321]

Nice tutorial! And sexy scooter!

[PunkVoider]

@ScooterLowrider lol, oh shit did that hurt?

[TheScooterboy18]

i need to get these, they look mad as

[samsalscoots]

he served me last week, free french toast mag, $15 Mgp 110mm Aero Wheel,Put the wheel on and tightened my headset.

[SBFilms01]

1:50 onwards abit of MGP product placement haha

[sunnyGsss]

so its basicly standard size bar and clamp version of HIC but with starnut already in the forks

[FPSChasecwg5]

Im sorry what did u say? i was distracted by that beautiful deck u have there!!!

[88mattdogg]

good job :) well explained 

[adam23able]

he served me last week, good bloke.

[ScootMGP7]

@ScooterLowrider Holy shit!

[ScootMGP7]

Nice ;)

[sicekillaz]

sick envy :)