Hey Guys,I have a softmodded wii 4.3E and i've had it like this for like a month but for some reason yesterday, my SDHC card couldn't be read in my Wii,It used to work fine and read all my homebrew stuff like FCEUX GX etc.
I recently moved the mega man 9 and 10 DLCs to my SDHC from my wii to see if i could get my DLCs working cus they would'nt work either
MY SDHC still works in my pc and my wii still reads SD cards so i don't know why my Wii wont read SDHC anymore,can anyone help thanks :)
Would you be so kind to tell me in lame mans terms what to do.I just bought the wii(europe) still in box for my kids,was thinking about the chip it is easier...to understand. So what do I need to do to play backups from different systems.*Your video's
i use memorex dvd-r at 8X SPEED if yer using image burn it shows description of dvd before u burn. there it says memorex dvd can handle UP TO 8x speed and it WORKS!
Nero just doesn't allow it. Try using ImgBurn. Also, make sure that they don't have white labels. Those get caught in the Wii's drive and throw errors (with no physical damage).
I installed the new loader, have both IOS 247 and 249 installed - when I try to run an ISO (bloombox NTSC) on my NTSC Wii, I get a wierd error message - 2 sentences on top of each other - makes it tough to read what's all about.. I can read "set" and "DVD".. no idea about the remaining words. Any idea?
how long does this usually take. I need to download a game, burn it, and then install the iso loader. I need to find out so i can find a time to do all of this.
i burnt it again on a memorex dvd-r mario cart wii ,so when i go to uninstall dvdx first then advance like u said i dont find iso 249 what am i doing wrong?
DVDx is not needed for v.3... but the option 249 is only found after installing rev 5 of the Cios. I guess try installing v.1 of the backup loader and see if that works. Have you tried any other games?
Uh, perhaps it was a bad burn? If it cant recognize it as a DVD, then something's really wrong. Try reburning first, then tell me if it still doesn't work. Also, which game is it?
could someone answer this, i change the thing of the dvdx to 249 and i play backups really good,but my question is you still can watch dvds on the mplayer(if you have one)
hey chris or anyone that reads this comment can they tell me if OKAMI works, it loads up but when i click on new game its starts to load but then stops, please someone help
Hi chrscool8, just wanna ask you if you could plz make a video of step by step installation of the backup loader by Wiigator and show exactly what you need to download to make it work properly. Thank you very much!
Make a folder called BackupLauncher. Place your backuplauncher-v0.2.dol in that folder. Make sure to add a xml and png file in that same folder (you can use any xml or png file from any of your apps for now).
This has been flagged as spam show
Hey Guys,I have a softmodded wii 4.3E and i've had it like this for like a month but for some reason yesterday, my SDHC card couldn't be read in my Wii,It used to work fine and read all my homebrew stuff like FCEUX GX etc.
I recently moved the mega man 9 and 10 DLCs to my SDHC from my wii to see if i could get my DLCs working cus they would'nt work either
MY SDHC still works in my pc and my wii still reads SD cards so i don't know why my Wii wont read SDHC anymore,can anyone help thanks :)
Nubecuube 11 months ago
stop acting like you wrote the fucking programs you prick
MrYout00b 1 year ago
this is illegal you know. MAH BOI
redbulborb 2 years ago
I can't wait to bomb some laws!
As long as you own a copy of the game it's okay.
chrscool8 2 years ago
Hey bro, don't let these haters talk crap about you. You're the fucking man!
c0deh4x 2 years ago 3
Lol, thanks?
chrscool8 2 years ago
Get a hair cut, you look cool with short hair.
YoungGlenwood33 2 years ago
i use memorix dvd-r 16x cheap discs but also work perfectly for softmod
iPodTouchReviews09 2 years ago
Me too.
chrscool8 2 years ago
your a pimp fool till u die lol trying to sound like a tripple G gangster.
enrique224 2 years ago
I'm not even sure what that says.
chrscool8 2 years ago
Next week you'll show us how to get a girlfriend. Oh wait.. Fail.
aliskaba 2 years ago
Why do I need to show you? Cant you get one yourself? I know I did fine at it, you should, too.
chrscool8 2 years ago
Yeah that's true. Someday I will get a girlfriend in WOW.
aliskaba 2 years ago
Lawl
RikuJerrad 2 years ago
Wait, did you just accuse me of playing WOW? Lol, you dumbass, I don't own that game and never will.
chrscool8 2 years ago
Would you be so kind to tell me in lame mans terms what to do.I just bought the wii(europe) still in box for my kids,was thinking about the chip it is easier...to understand. So what do I need to do to play backups from different systems.*Your video's
good but I am from the old school
deadwood7s 3 years ago
Okay. Here's what you'll need to do:
1) Get and install the Homebrew Channel using the Twilight Hack. (I don't have a guide, but they're everywhere on the internet)
2) Once you've got the HBC installed, just follow the steps in my two part Gamma video, and you should be good to go.
Much easier and cheaper AND safer than using a chip.
chrscool8 3 years ago
and doesnt void you warrenty unlike a chip
iPodTouchReviews09 2 years ago
Yep.
chrscool8 2 years ago
i use memorex dvd-r at 8X SPEED if yer using image burn it shows description of dvd before u burn. there it says memorex dvd can handle UP TO 8x speed and it WORKS!
ganstathuginit 3 years ago
Yeah, it's really just personal preference. My personal computer only burns at like, 2x, but my family computer a lot more.
chrscool8 3 years ago
i keep getting the read disk error. What kind of dvd do you burn with and at what speed?
irongobbo 3 years ago
Memorex DVD-R at 2x burn speed.
chrscool8 3 years ago
will any memorex dvd-r work
because this is the second time i bought dvd-r and i cant get it to work.
i have memorex which say 1x-16x but when i use nero its lowest is 4x
do i have to buy a diffrent type or what?
koopspal 3 years ago
Nero just doesn't allow it. Try using ImgBurn. Also, make sure that they don't have white labels. Those get caught in the Wii's drive and throw errors (with no physical damage).
chrscool8 3 years ago
i have imgburn and it gives me the option to burn at 1x but in the side box it says the write speeds for the dvd-r are 4x,8x,12x,16x
so should i just go ahead and try to burn at 1x?
also thx for the info about labels
koopspal 3 years ago
Yeah, you're fine as long as it's not HIGHER than those numbers.
chrscool8 3 years ago
ok thx very much ill try it right now
man ure the best ive been following ure work since the waninko backup launcher
koopspal 3 years ago
IT WORKS!!!
thank you so much u are the best
koopspal 3 years ago
No problem. Have fun! =D
chrscool8 3 years ago
is boom blox fun?
james98214 3 years ago
Quite.
chrscool8 3 years ago
can you make the tutorial on how to install this backup loader?
james98214 3 years ago
It's exactly the same as the other one, except you run the new dol.
chrscool8 3 years ago
Hey Chris,
I installed the new loader, have both IOS 247 and 249 installed - when I try to run an ISO (bloombox NTSC) on my NTSC Wii, I get a wierd error message - 2 sentences on top of each other - makes it tough to read what's all about.. I can read "set" and "DVD".. no idea about the remaining words. Any idea?
finkel98 3 years ago
Happened to me with BoomBlox also. But only once. All it took was ejecting and restarting the Wii, and it has worked every time.
chrscool8 3 years ago
how long does this usually take. I need to download a game, burn it, and then install the iso loader. I need to find out so i can find a time to do all of this.
jjbro1 3 years ago
Between two and ten hours...
chrscool8 3 years ago
i did burn that again lastnight btw i dont know what the heck im doing wrong
1cammilian 3 years ago
i burnt it again on a memorex dvd-r mario cart wii ,so when i go to uninstall dvdx first then advance like u said i dont find iso 249 what am i doing wrong?
1cammilian 3 years ago
DVDx is not needed for v.3... but the option 249 is only found after installing rev 5 of the Cios. I guess try installing v.1 of the backup loader and see if that works. Have you tried any other games?
chrscool8 3 years ago
i have the wii gator 3 on home brew channel but cant get the backup game to work it says error no dvd can u help?
1cammilian 3 years ago
Uh, perhaps it was a bad burn? If it cant recognize it as a DVD, then something's really wrong. Try reburning first, then tell me if it still doesn't work. Also, which game is it?
chrscool8 3 years ago
force unleashed is still in black and white for me )=
leobachi53 3 years ago
Are you sure you're using the new file? It runs in color for me.
chrscool8 3 years ago
yup i downloaded it from your link
but when i was burning it with img burn it told me to turn off my media player when it wasn't on
i wonder if it affected the process
leobachi53 3 years ago
i fixed it
leobachi53 3 years ago
could someone answer this, i change the thing of the dvdx to 249 and i play backups really good,but my question is you still can watch dvds on the mplayer(if you have one)
RockXuXA 3 years ago
Good question. I have the app, but I haven't tried it since I got the iso loader. If I find out before someone else answers, I'll reply.
chrscool8 3 years ago
hey chris or anyone that reads this comment can they tell me if OKAMI works, it loads up but when i click on new game its starts to load but then stops, please someone help
falcomainer 3 years ago
*Clicks on the link in the disc.* "Die Webseite kann nicht angezeigt werden." (The page cannot be displayed) NOOOOOOOOOOOOOO!!!!!
Steli111 3 years ago
Lol.
*points to newest video*
Everything you'll need is there. =D
chrscool8 3 years ago
kk what's gonna be the name of the video.
bernardpj 3 years ago
...Hm, not sure. You'll see it. It'll have something like "Step-by-step" in the name.
chrscool8 3 years ago
Aaaaand it's uploaded. It'll appear once it's done processing.
chrscool8 3 years ago
OK, thank you very much!
bernardpj 3 years ago
Not a problem. ^_^
I'm taping now, so expect it to be up by a few hours from now.
chrscool8 3 years ago
The recording is finished, now some editing, then it'll be uploaded.
chrscool8 3 years ago
Only thing I have is Homebrew Channel so, don't need to cover that.Thanks!
bernardpj 3 years ago
Okay, I think I'll make that video now.
=D
chrscool8 3 years ago
Hi chrscool8, just wanna ask you if you could plz make a video of step by step installation of the backup loader by Wiigator and show exactly what you need to download to make it work properly. Thank you very much!
bernardpj 3 years ago
Including the installation of the Homebrew Channel or starting assuming you already have that installed?
chrscool8 3 years ago
Can you help... i am getting error when i load the DVD, i followed your steps and but i am burning a TDK DVD+R DL ...
Xeron101 3 years ago
Dual-Layer disks = BAD.
Also, +R's are bad... so you pretty much have the most opposite disk you could have.
Go for DVD-Rs.
chrscool8 3 years ago
hey everyone get this one if u want to play sluggers
o an btw thanks chriscool8 for it
falcomainer 3 years ago
Not a problem. ^_^
chrscool8 3 years ago
Do you still need to patch it?
WeirdMovies 3 years ago
All steps are the same, but you instead run the new app.
chrscool8 3 years ago
does it play mario super sluggers
falcomainer 3 years ago
Yes, it does!
Was just playing last night!
=D
chrscool8 3 years ago
does it work with dvd + rw
emzademon 3 years ago
Never has for me.
chrscool8 3 years ago
where do i put the backuplauncher-v0.2.dol
Graeme122 3 years ago
Make a folder called BackupLauncher. Place your backuplauncher-v0.2.dol in that folder. Make sure to add a xml and png file in that same folder (you can use any xml or png file from any of your apps for now).
whatdoyounkow 3 years ago
Haha, and I came to tell you about it. Works great! Havin' fun?
8bitLovers 3 years ago
Yeah, man! Just started No More Heroes. Now THAT is an awesome game.
chrscool8 3 years ago
Neat, I'm just about to burn that. Can't wait to give it a go.
8bitLovers 3 years ago
Hmm, so I still need to install the custom firmware huh?
And do you think this will work with SSBB?
Great vids man, your keeping me up to date!!
whatdoyounkow 3 years ago
It's definately possible, the dvd5 version'd probably work best.
chrscool8 3 years ago
Isnt that the pal vesion? My wii is NTSC
whatdoyounkow 3 years ago
Not sure, but I can play Pal games on my USA-NTSC wii with this. I tried both pal and NTSC of boomblox, both worked.
chrscool8 3 years ago
Can you make a vid with it in action? Thanks.
WeirdMovies 3 years ago
Well, what you saw of BoomBlox there was it, and yeah, I'll probably make one in a little. My sister is using the tv right now...
chrscool8 3 years ago
damn i still dont know how to put the app in my sd card lol
leobachi53 3 years ago
Lol, just read some tutorials for the Homebrew Channel.
chrscool8 3 years ago