@TheBookr There is nobody hammering in the video. It is the flashback. The point of the video actually. The hydrogen igniting and going down the tube until it hits the cigarette filter. The filer prevents it from going back further and causing problems in the hydrogen fuel generator itself. What you are calling hammering is actually popping.
@00011theman no you dont know what you are talking about wikipidia :
'pure hydrogen-oxygen flames emit ultraviolet light and are nearly invisible to the naked eye ,as illustrated by faint plume of the space shuttle main engine compared to the higly visible plume of a space shuttle solid rocketbooster'.
I have had problems with it overheating after like 3hrs or so with that design. I actually made another pvc pipe style with greater flow rate but still would boil water. This was plain tap water which is higher in minerals/iron so I never added any electrolyte.
So I cut down on the number of plates I put into each tank. This helps to allow my setup to run longer without getting hot. I use a common bubbleler for all of them.
Yea, have the hydroxy tube run into bucket of water, then hold torch to bubbles. snap snap snap, they ignite.
I have never filled the torch with hydroxy as that is dangerous. Normally the torch is full of fuel. then come out and with oxygen and ignition ignite. Hydroxy already has oxygen making it dangerous to store.
who s hammering ? that very annoying
TheBookr 3 months ago
@TheBookr There is nobody hammering in the video. It is the flashback. The point of the video actually. The hydrogen igniting and going down the tube until it hits the cigarette filter. The filer prevents it from going back further and causing problems in the hydrogen fuel generator itself. What you are calling hammering is actually popping.
xljimmy89 3 months ago
@ljimmy89 oh dear
JEHAN606 7 months ago
bOOM!!
JEHAN606 7 months ago
@JEHAN606 shacka lacka
xljimmy89 7 months ago
ridicol
conexiuni2005 1 year ago
You shouldn't see a big flame because when hydrogen burns it dosent produce visible light it burns in the a different electromagnetic frequency
3091752 1 year ago
@3091752 You have no idea what your talking about...
00011theman 1 year ago
@00011theman no you dont know what you are talking about wikipidia :
'pure hydrogen-oxygen flames emit ultraviolet light and are nearly invisible to the naked eye ,as illustrated by faint plume of the space shuttle main engine compared to the higly visible plume of a space shuttle solid rocketbooster'.
3091752 1 year ago
@00011theman Look it up under hydrogen in wikipedia i suggest you do some research .
3091752 1 year ago
Nice job!
How long have you been able to maintain a flame ?
Snapshotok2000 2 years ago
Thank you.
I have had problems with it overheating after like 3hrs or so with that design. I actually made another pvc pipe style with greater flow rate but still would boil water. This was plain tap water which is higher in minerals/iron so I never added any electrolyte.
xljimmy89 2 years ago
I had the same problem with each of my units.
So I cut down on the number of plates I put into each tank. This helps to allow my setup to run longer without getting hot. I use a common bubbleler for all of them.
Snapshotok2000 2 years ago
yes, so the cigarette bud works, for how long?
moonielo 2 years ago
Not sure what you mean for how long? It doesnt burn or anything so forever I would assume.
xljimmy89 2 years ago
my dad and i did the same thing accept hold the torch to the water and when bubbles came up the ignited
can you fill your torch with the hydrogyn?
sillymonsterfromthe4 3 years ago
Yea, have the hydroxy tube run into bucket of water, then hold torch to bubbles. snap snap snap, they ignite.
I have never filled the torch with hydroxy as that is dangerous. Normally the torch is full of fuel. then come out and with oxygen and ignition ignite. Hydroxy already has oxygen making it dangerous to store.
xljimmy89 3 years ago