I have two nvidia 8400gs cards working in two different PCs. Games like call of duty 4 runs well, but when i run any 3d test (like fur test) it gives only 7 to 10 fps. both cards have the same problem....i can't understand why it is so!!!!!! can you help?
@Shianetto run a benchmark and see if there are artifacts, if not youre ok, but its dangerous to overheat so try adding a fan on the top of the gpu, this can prevent high temps
@jeromegoh225 the problem is that the maps of fallout new vegas are not like Counter Strike Source
Counter Strike source gives you the ilusion of maps far away but they are not complete just on the gaming zones on fallout new vegas it loads the entire map except without the Buildings Grass trees ETC...
@tuber749 so what would be the difference between a 512mb 8400gs and a 1024mb 8400gs? besides increased memory and decreased performance of the core clock,shader clock and memory clock.
@xeonhl2 i mean to say how much i can oerclock my gfx.....is it harmfull to gfx.......according to you, how much i can increase my settings...???pls reply....i'm waiting
Artifacts are small colored dots can be yellow white or really weird textures that appear on the screen if your overclock isn't stable or the gpu gets too hot.
i have a picture of that i'll send it to you later so you can see.
well, overclocking in this case is to increase the frequencies of the video card to a higher level than the factory default frequencies, with this you can get a few more FPS in your games.
@sonyeri09 Try one of those expansion slot fans , really noisy but perfect for putting next to these cards , I also made a little cardboard enclosure to give it really good air flow too , took my card temp down by 15 - 20C and improved overall system temps , gave me enough time to save up for a new machine and can get pretty good performance from it.
if you need higher clock speeds on your graphics card or cpu yes but remember you need fans that take the hot air out and some to get cold air inside the case.
but try aswell to put some artic silver on the heatsinks
what is overlocking?(sorry fer the noob question, haven't updated graphics card since 2003[and i got a crappy one then] and i was thinking it's time to upgrade and i stumbled upon this video)
use nvflash and nibitor, if you want oc the ram/oc core clock more i'd suggest you rise the ran latency all the way to the top and rise voltage at least 40% more then save the bios and start doing the pencil mod and external 4 pin power input(if necessary) on pcb. i did all of these on my 8400gs pci and it ran 1100mhz core/2750mhz shader /1450mhz(2900mhz ddr) ram.
PS: it beat stock 8600gt in cs source bench and only being mirror to 8600gt in hl2 ep1/2 in a tiny marge.
well i just keep my 8400gs for "fun" having torture it under extreme condition. thus the setup could have beaten stock 8600gt and on tie with stock 8600gts if not bottleneck from pci interface. also i oced my msi 8600gts diamonds plus to 900mhz core/2300mhz shader/1200mhz(2400mhz ddr)ram and it beat an underclock 9600gt and stock 3850/3870.
dude wtf, i just buyed the same graphics card (nvidia 8400gs), and i installed it because the older graphics card is broken,..and the old graphic card is the same (nvidia 8400gs), and WTF, i got the same requirements as old, but my newer graphics card is making me lagg...??? WTF??
@2007excalibur2007 Nice, I got the BFG 8400 gs with the same stock clocks as you and 400mhz mem and i overclocked it too 716mhz, 1.8ghz shaders and 575mhz mem on stock and stable with the temps at 64C Idle and 58C on load (fan kicks in)
@EminemBeastFan24 Just google them. I, being the good person I am, will give you the name, EVGA's precision software (overclocking) techpowerup GPU Z (Information only, no overclocking.) Can't post links, just google them.
I had the same problem. You can fix it by applying the new clock settings by using RivaTuner. When you reboot, the new settings will have been applied.
@mariosho2525 About the 8400GS, I've read several negative comments on it AFTER I bought it. But... I'm now downloading some demos to see how my new machine performs, and I'm satisfied with it. The 8400GS is a card which will completely handle basic operations, and run most games from up to 2006 really well. After that, you need to start decreasing some options. I run Far Cry at High with ~30fps and Crysis at Low, with a few things at Medium @ ~13fps. It's not the ideal one
I hAVE A 8400gs pci 512mb, the stock is 567 and memory is 333 with 1400 shaders. I can oc to around 620 core to 400 memory and get up to 1530 shader, but i don't notice any performance increase lol
i don't believe the monitor has anything with the res of the video card. i had the same res settings from when i used to have it on my small lcd monitor and now that i have it on my big hdtv.
the only thing that would change is the actual appearance of graphics(DVI->HDMI) and not its gameplay preference.
i have the same video card and i managed to overclock it with the same software at the freq: core:715 sader:1430 memory:460 The results were amazing in COD 5 (@1024-768, all on high and extra) but i need a better cooler because the temperature gets high
i have a nvidia mobo, so i use nTune for pc tweaks, it has a stability test, so i start rising clocks, and now, i have core 760, shaders 1877, mem 455-460
thank you man i have the same card and i want to overlock it . question : are you sur that this configuration will not corrupt my card , and is it the max that i can do ?
Comment removed
19atiq98 4 days ago
this gpu doesnt have fan right?
TheMitsaras98 1 week ago
Comment removed
19atiq98 4 days ago
I have two nvidia 8400gs cards working in two different PCs. Games like call of duty 4 runs well, but when i run any 3d test (like fur test) it gives only 7 to 10 fps. both cards have the same problem....i can't understand why it is so!!!!!! can you help?
tauheedmukhtar 3 weeks ago
@tauheedmukhtar did you overclock it? or maybe because the gpu cant go faster than that
19atiq98 4 days ago
i overclocked my ge force 8400gs to 756mhz is that save?
Shianetto 3 weeks ago
@Shianetto core ? memory ? or shader? if memory it will destroy your card if it has high temp
19atiq98 4 days ago
@Shianetto run a benchmark and see if there are artifacts, if not youre ok, but its dangerous to overheat so try adding a fan on the top of the gpu, this can prevent high temps
TheMitsaras98 4 days ago
Where can i download t wallpaper???
Man good vid, i played Burnout Paradise at High in 1024x768
Jonatas2367 1 month ago
Comment removed
19atiq98 4 days ago
Dude,s u even can play serious sam 3 BFe , but a quality bit low , even also u will have fun playin it
anish5369 1 month ago
Comment removed
19atiq98 4 days ago
how about stock cooler with 725 mhz core 1790 mhz shaders 450 mhz memory?
19atiq98 5 months ago
This has been flagged as spam show
I had just finished playing CRYSIS 2 on my 8400gs 512 and it works fine!! so dont tell that gs 8400 suck because it is good for prices
Nib3lLung 5 months ago
there are two different versions of 8400GS with different cores, check wikipedia geforce 8 series page :))
TheUrzur 5 months ago
is this able to run new vegas looking pretty?
jeromegoh225 5 months ago
@jeromegoh225 yeah i have it and i run it well 30-50 fps Low graphics
tuber749 4 months ago
@tuber749 apparently mine's 1gb video memory.but the clocks are bloody weak
jeromegoh225 4 months ago
@jeromegoh225 the problem is that the maps of fallout new vegas are not like Counter Strike Source
Counter Strike source gives you the ilusion of maps far away but they are not complete just on the gaming zones on fallout new vegas it loads the entire map except without the Buildings Grass trees ETC...
tuber749 4 months ago
@tuber749 so what would be the difference between a 512mb 8400gs and a 1024mb 8400gs? besides increased memory and decreased performance of the core clock,shader clock and memory clock.
jeromegoh225 4 months ago
@jeromegoh225 The difference is that : 512 Will use more cores to compensate the memory that it cannot fill
And in the 1024 it will use less cores because there's more space to fill in with data
tuber749 4 months ago
@tuber749 hmmm does that mean that they are equal in terms of performance?
jeromegoh225 4 months ago
@jeromegoh225 Not equal but the game will be faster with more memory to be fill beacuse it will use less cores to compensate
tuber749 4 months ago
@tuber749 ok. thank you so much for the info ! i'm at peace now
jeromegoh225 4 months ago
@jeromegoh225 Im glad you are happy anything else you need say !
tuber749 4 months ago
@tuber749 If you need help on New Vegas i can give you tips
tuber749 4 months ago
Can I play The Witcher 2?
Ge Force 8400 GS 1GB
Pentium Dual Core 2.6GHz
4MB Ram
I keep seeing the fckn game video jumping even in the lowest setts. Please help!
emezzanine 5 months ago
I had just finished playing CRYSIS 2 on my 8400gs and it works fine!!
anujsharmaofficial 7 months ago
What is the name of the song please
kaiqse 7 months ago
can the card be damaged by the overclock? i wanna know!
alexcent50 7 months ago
@alexcent50
yes, but if you increases the frequencies a lot or due heat, that's why you have to keep an eye on the temps.
xeonhl2 7 months ago
mine is GPU clock :589MHz, Memory:500MHz, Shader: 1402MHz....can you pls send me the overclock setting...pls reply fast..thxs in advance
deep15151 7 months ago
@deep15151
settings for what? everything is in the video
core 620Mhz
Shaders 1440Mhz
Memory 445Mhz
xeonhl2 7 months ago
@xeonhl2 i mean to say how much i can oerclock my gfx.....is it harmfull to gfx.......according to you, how much i can increase my settings...???pls reply....i'm waiting
deep15151 7 months ago
@deep15151
First, you have to see how high is the gpu temp while you're playing, DON'T let the gpu reach 80º C,
it can go up to 90ºC but that's not safe for that card, once i was playing Crysis and the gpu was 80ºC
no artifacts but i had to decrease the frequency of the gpu.
i wasn't able to play Crysis with 450Mhz on the Memory. 445Mhz was the max or the screen will be full of artifacts.
xeonhl2 7 months ago
@xeonhl2 can you pls tell me what is artifacts..??
deep15151 7 months ago
@deep15151
Artifacts are small colored dots can be yellow white or really weird textures that appear on the screen if your overclock isn't stable or the gpu gets too hot.
i have a picture of that i'll send it to you later so you can see.
xeonhl2 7 months ago
@xeonhl2 hey brother please tell me how to run stable test..? waiting...
deep15151 7 months ago
my gfx is nvidia geforce 8400gs 1 gb
deep15151 7 months ago
tell me the name of the tools....fast
deep15151 7 months ago
@deep15151
ATiTool and EVGA Precision
xeonhl2 7 months ago
can somebody pls tell me what is overclocking...??
deep15151 7 months ago
@deep15151
well, overclocking in this case is to increase the frequencies of the video card to a higher level than the factory default frequencies, with this you can get a few more FPS in your games.
xeonhl2 7 months ago
nice backround :D could you send it :3
legoman3342 7 months ago
This has been flagged as spam show
hey plz help after overclocking my pc hangs again & again
it hangs and i have to restart and no other option works other than restarting , thnx in advance :) (nvidia 8400 gs 512 mb , forceware version 275.33)
yashgurbani4 7 months ago
Comment removed
yashgurbani4 7 months ago
Comment removed
yashgurbani4 7 months ago
nice background view
Zapperlord5583 8 months ago
hey i overclocked it to
core 611mhz
shader 1527mhz
memory 558 mhz
and now i can run gta iv smoothly
HariRedBoyz8808 8 months ago
@sonyeri09 Try one of those expansion slot fans , really noisy but perfect for putting next to these cards , I also made a little cardboard enclosure to give it really good air flow too , took my card temp down by 15 - 20C and improved overall system temps , gave me enough time to save up for a new machine and can get pretty good performance from it.
MonsterMunchAreAce 9 months ago
Can My PC Play Cod 4 With...
Genuine intel 1.80ghz Dual Core
2gb RAM
Galaxy NVIDIA geforce 8400gs
Thanx
ThePapasBoy 9 months ago
@ThePapasBoy
sure
xeonhl2 9 months ago
@ThePapasBoy yeah, even at high res and high settings
julian23561 9 months ago
@ThePapasBoy Update ur cpu and buy nividia --220 GT 1G-- if you want to play well
HITLER20021 8 months ago
@xIDecapitatorIx no i said FUCKING 9 times to be fucking exact!!!!!!!!
legendaryezio 9 months ago
@legendaryezio
fucking LOL xD
xeonhl2 9 months ago
thanks man . i have overclocked my nvidia 8400 gs with your help. thanks a lot..........
MrY4j 11 months ago
8400 gs is a fucking shit
even when i fucking overclocked it to fucking full settings it fucking showed very minimum fucking improvement
this ain't a fucking card for playing hardcore games
this fucking card can only run a fucking game at fucking low settings
legendaryezio 1 year ago
@legendaryezio
this card is not for hardcore games (crysis) but u cant say that only can run a game at low settings
i played COD 4, half-life 2 EP1 and EP2, Doom 3, and many others really well
if you want something better go buy it, dont start saying shit about this card that bring me a lot of fun with my games
xeonhl2 1 year ago 9
@xeonhl2 you go boy fuck his mind
thetrainguy1 11 months ago
@xeonhl2 Ya man who says this card is not gud ??
Gireesh0092 9 months ago
my 8400 gs overcloked at 600 core 485 memory and 1400 shader no artifacts
charlesmoretao 1 year ago
my default GPU clock 567Mhz and i overclocked to 600Mhz default memory 400Mhz overclocked 441Mhz Shader 1400Mhz 1500Mhz is this good?
zekogroundzero 1 year ago
@zekogroundzero
that's quite good but remember that the memory cant handle more than 450mhz without a heatsink
so try to get a better cooling before you think on higher clock speeds ;)
xeonhl2 1 year ago
@xeonhl2 ok i clocked it 719Mhz and it's stable but does it really make a diffrence the saboteur still lags?
zekogroundzero 1 year ago
@zekogroundzero
to really see a difference you need to increase the memory freq. but you need to make a voltmod if you really want to increase the freq.
xeonhl2 1 year ago
i have 3 fans installed in my computer or do i need another kind of cooler? reply as fast as you can
zekogroundzero 1 year ago
@zekogroundzero
if you need higher clock speeds on your graphics card or cpu yes but remember you need fans that take the hot air out and some to get cold air inside the case.
but try aswell to put some artic silver on the heatsinks
xeonhl2 1 year ago
does it require a cooler???
MrY4j 1 year ago
my 512 geforce 8400gs is: core clock = 750
shader clock = 1850
memory clock = 399
mattakudesu 1 year ago
Overclock my GeForce8400gs(512mb)
GPU Clock=720mhz
Memory=450mhz
shader=1800mhz=1.8ghz
aditya8400gs 1 year ago
@LegendaryRainbowsix
AtiTool
xeonhl2 1 year ago
what is overlocking?(sorry fer the noob question, haven't updated graphics card since 2003[and i got a crappy one then] and i was thinking it's time to upgrade and i stumbled upon this video)
PlayerWins 1 year ago
@PlayerWins
overclock means you can increase the speed of a CPU GPU or RAM
in this case the GPU core speed was 459Mhz and after overclocking was 620Mhz
so it runs faster and gives more FPS
but without better cooling you can damage your GPU or VRAM
xeonhl2 1 year ago
use nvflash and nibitor, if you want oc the ram/oc core clock more i'd suggest you rise the ran latency all the way to the top and rise voltage at least 40% more then save the bios and start doing the pencil mod and external 4 pin power input(if necessary) on pcb. i did all of these on my 8400gs pci and it ran 1100mhz core/2750mhz shader /1450mhz(2900mhz ddr) ram.
PS: it beat stock 8600gt in cs source bench and only being mirror to 8600gt in hl2 ep1/2 in a tiny marge.
hanrinch 1 year ago
:O nice overclock
i never tried that.
i already have an GTS 250.
and gave the 8400gs to a friend so i cant test that out :)
xeonhl2 1 year ago
well i just keep my 8400gs for "fun" having torture it under extreme condition. thus the setup could have beaten stock 8600gt and on tie with stock 8600gts if not bottleneck from pci interface. also i oced my msi 8600gts diamonds plus to 900mhz core/2300mhz shader/1200mhz(2400mhz ddr)ram and it beat an underclock 9600gt and stock 3850/3870.
hanrinch 1 year ago
i have stock cooler with 800 core , shader 2000 ,and 500 mem
metalslug12345 1 year ago
dude wtf, i just buyed the same graphics card (nvidia 8400gs), and i installed it because the older graphics card is broken,..and the old graphic card is the same (nvidia 8400gs), and WTF, i got the same requirements as old, but my newer graphics card is making me lagg...??? WTF??
GzBluess 1 year ago
@GzBluess
lagg?
in all games or just in some ones?
xeonhl2 1 year ago
if your old gfx are 7900gtx and you change to 8400gs...then yes
hanrinch 1 year ago
Need for speed pro street in his backround :D
SPAWN662 1 year ago
I have the G98 version of this card. It has a faster stock core clock of 567 MHz (1400 MHz stock shader clock), and I overclocked it to this:
Core Clock - 733 MHz
Shader Clock - 1800 MHz
Memory Clock - 478 MHz
No extra cooling was used, and it's pretty stable. I could overclock the memory more, but that would cause my games to crash after a while. =\
2007excalibur2007 1 year ago
@2007excalibur2007 Nice, I got the BFG 8400 gs with the same stock clocks as you and 400mhz mem and i overclocked it too 716mhz, 1.8ghz shaders and 575mhz mem on stock and stable with the temps at 64C Idle and 58C on load (fan kicks in)
mikez357 1 year ago
nice but my onboard video card witch sucks cock is running at 660.54mhz
memory is at 734mhz. no fan or cooler. lol
HITS300 1 year ago
how i overlock?
gerson425 1 year ago
what are artifacts?
Imraahm 1 year ago
@Imraahm Graphical errors (glitches). They're very noticeable in games when you've overclocked your card too far.
2007excalibur2007 1 year ago
If you have the money don't go for 9800gt!Just buy a sapphire radeon 5770+
Gunymp3 1 year ago
this video card is shit i played cod4 and it was shiiit but now I have this
Intel Core 2 dual E7400
P5QPL-AM
4 GB RAM
1 TB GB
Ocz 400w
and the video card is
PNY Geforce 9800GT
and I play cod4 60~80
YaAkOvXsTYle 1 year ago
dude will u post links to program ur using....
EminemBeastFan24 1 year ago
@EminemBeastFan24 Just google them. I, being the good person I am, will give you the name, EVGA's precision software (overclocking) techpowerup GPU Z (Information only, no overclocking.) Can't post links, just google them.
JoakoXWacho 1 year ago
@JoakoXWacho Thanks man for the the names so i could overclock
rickeyfresh24 1 year ago
what were your FPS after and beforce overclock it ?
drek507 1 year ago
thx now is gaming better
wolfik0predator 2 years ago 4
aumentar la velocidad del reloj te puede dañar la tarjeta de video, asi que no lo hagan
chaefutbol10 1 year ago
empiezale? como hisiste eso?
kraven23026 2 years ago
is this card worth buying plz help urgent
piyuppp1 2 years ago
no not really if u can buy a better one that is
beeny95 2 years ago
ive got my memory at 450 but retarded nvida wont save my freq. whenever i restart my computer
ob1167 2 years ago
Does yours only go as far as 450?
Mine only goes that far irritates the shite outta me xD
devilzzzzzzzzzz 2 years ago
i haven't tried to overclock it over that
ob1167 2 years ago
ah right best not to its messes up, alhough if you do just restart you comp and itll be fine lol but over about 477 mine went weird
devilzzzzzzzzzz 2 years ago
thats just what i had it at, i bet i can get to 500
ob1167 1 year ago
I had the same problem. You can fix it by applying the new clock settings by using RivaTuner. When you reboot, the new settings will have been applied.
Paulph04 1 year ago
watch?v=vIDdDbXcikM
8400gs playing crysis on med/low and physics on high please watch
maniax786 2 years ago
u play prostrret i can tell from desktop background :)
johnyrockshell 2 years ago
I have a question is it worth it to buy Pentium 4 3.07 GHz -4 gig RAM -250 gig HD - Nvidia GeForce 8400 GS PC for 350 dolars??
mariosho2525 2 years ago
i dont think so u can buy a better pc for that money
but is your money you choose
xeonhl2 2 years ago
@xeonhl2 are you using any cooling system, or without any kind of it???
farooqmss 1 year ago
I just bought a Pentium 4 2.80 GHz, 2 GB of DDR2, a Nvidia GeForce 8400 GS, And a new motherboard for $187.25
gibsonlespaul2 2 years ago 2
This comment has received too many negative votes show
why the fuck do you need 4gb of ram with a pentinum 4? you retard.
Cheesecake2k 2 years ago
@mariosho2525 You can get those nowadays for around 150-200, in my area
x2musicaltomato 1 year ago
@mariosho2525 About the 8400GS, I've read several negative comments on it AFTER I bought it. But... I'm now downloading some demos to see how my new machine performs, and I'm satisfied with it. The 8400GS is a card which will completely handle basic operations, and run most games from up to 2006 really well. After that, you need to start decreasing some options. I run Far Cry at High with ~30fps and Crysis at Low, with a few things at Medium @ ~13fps. It's not the ideal one
kynigh 1 year ago
@mariosho2525 i bout the same for 300euros 3 years before :D
xphilipgrx 1 year ago
@mariosho2525 buy an amd processor and an ati graphics card ( amd and ati are cheaper)
masterchief0611 1 year ago
i also overclocked mine on air cooling
core:754mhz
memory:399(effictively798mhz)
shader:1862mhz
/watch?v=cioCq75l0Xc watch my video!!
maniax786 2 years ago
I have H.PDV6700 DUO 2 CORE T8300 , 8400GS , 3GB RAM . Wil it run Crossfire ,COD 4 , FEAR 2
how much fps will it be on Crossfire , also how to overclock m y 8400GS on my laptop
fanfanz9 2 years ago
crossfire you mean SLI with the 8400gs?
it will help but i dont not know much
xeonhl2 2 years ago
Crossfire is also a game....
daweirdodude 2 years ago
i have a GF8400gs, the stock is 400, 266mhz and 900 shaders, i can oc to 472 with 963 shaders
and i feel it increase a little the performance
J16D 2 years ago
yeah it does not help much that oc
but what can i do.
until i get my hd 4770
xeonhl2 2 years ago
experttool is the same shit if U got a gainward card
gtr500able 2 years ago
RIVATUNER xD
FRANKXDELRIO 2 years ago
EVERYBODY LIKES THIS SONG?! CS ME 2
maccodj 2 years ago
I hAVE A 8400gs pci 512mb, the stock is 567 and memory is 333 with 1400 shaders. I can oc to around 620 core to 400 memory and get up to 1530 shader, but i don't notice any performance increase lol
MysteryRidahz 2 years ago
in the grafix test what is included in ATI Tools
SmilezGER 2 years ago
the cube in atitool is to see if are artifacts in high overclock levels
xeonhl2 2 years ago
i dont need to overclock and i get 120-140fps xD
SmilezGER 2 years ago
120-140 fps
in what game?
xeonhl2 2 years ago
maybe cs lool i get over 900
tiagom135 2 years ago
Sure with your GeForce 7050 ¬_¬
aliv101010 2 years ago
my current settings are
Core 600
shader 1250
Mem 500 !! :D
turek5xd 2 years ago
Also how where you apple to get such high settings?
i pushed the settings up a bit and it seems i can push it a bit more however i dont wish the fry the only video cars i have atm :p
my current settings are:
clock 615
mem 450
shad 1230
i like the even numbers :p
CatulusZemar 2 years ago
i don't believe the monitor has anything with the res of the video card. i had the same res settings from when i used to have it on my small lcd monitor and now that i have it on my big hdtv.
the only thing that would change is the actual appearance of graphics(DVI->HDMI) and not its gameplay preference.
CatulusZemar 2 years ago
i have the same one
8400GS but i have a program wich can overclock it it's in the properties called VGA clock(dunow why it's called vga , it's a pci tough)
anyway my config
core: 578Mhz
Shader clock 1428Mhz
Memory clock 816Mhz
can i overclock it? i mean more than that without having to worry ?
phazepiracy 2 years ago
memory clock 816mhz? WTF :O
is that true?
xeonhl2 2 years ago
so how high have you been able to get this card without artifacts or damage to the GPU?
im currently using the same card till i can get be a 9500gt
these are the specs im using, dont rly notice much of a diff from stock settings actually.
587/448/1174
CatulusZemar 2 years ago
Yes dude 578Mhz core clock
1428Mhz for the shader clock
and 816Mhz memory clock
i have a question do the monitor have a role to play i mean if you have a good monitor you would be able to play in high res
coz i'm not able to play DMC4 in high res it's so sloow plus my max res in this monitor is 1280x1024 crappy isn't it for a 8400Gs
phazepiracy 2 years ago
porongoso!!!!!!!
edgeplustv 2 years ago
verry god my originals: core:567-600:memory:333-445;shader1400-1500. temperature 45-50.
maaiconn 2 years ago
I'll try doing this what's the name of the Program you used?
fastfighter 2 years ago
EVGA Precision
xeonhl2 2 years ago
Naa just download Rivatuner and start overclocking XD it will auto mod the volts
Nimerbushnaq 2 years ago
dude my clocks arelike this 646/1380/500 and it gets max temp for like 72C and nothing bad happens to the GPU XD and good performance too..
Nimerbushnaq 2 years ago
how you get 500mhz on the mem if i set the mem
at 500mhz the "arifacts" start to appear
did you do some voltmods?
xeonhl2 2 years ago
around 60~ playing hard...depends on ambient temperature...
neruxxx 2 years ago
60 in full load? wtf i get 58*C in idle and in full load 78*C and i have this clocks 550/1400/500
Magina33 2 years ago
strange...maybe different cooling systems :S?, btw i have 2 fans on the v card.. 1 on side panel..etc.
neruxxx 2 years ago
i have the same video card and i managed to overclock it with the same software at the freq: core:715 sader:1430 memory:460 The results were amazing in COD 5 (@1024-768, all on high and extra) but i need a better cooler because the temperature gets high
acydtoxic 2 years ago
What is the recording software you used?
skullkid4900 2 years ago
i have 8400 gs
core 800
shaders 1800
mem 500
bilou360 3 years ago
Wtf stop lying the max for shaders is 1400... and if u did overclock it it well be blown to pieces XD
Nimerbushnaq 2 years ago
nothing bad happen at 1400mhz shader clock
i can play and only gets to 65°C
xeonhl2 2 years ago
woah really?! XD so the performance increases or nothing happense?
Nimerbushnaq 2 years ago
que software utilizaste?
q procesador tienes?
planeo hacer el overclocking
tngo la ECS 8400 gs
y un procesador pentium 4 de 2.6mhz
y 2 gb de ram ddr2
una placa biosta p4m900-m7 FE
Imarco93 3 years ago
Il 'appelle Riva Tuner. Je suis desoler pour ma mal Anglais, c'est car j'habite a Angleterre =S
beanflea12 2 years ago
core 700
shaders 1721
mem 450
no artifacts, MSI 8400 gs stock fan + 1 old celeron's proc. fan xd
neruxxx 3 years ago
how you get core 700 and
shaders 1721?
tell me
xeonhl2 3 years ago
i have a nvidia mobo, so i use nTune for pc tweaks, it has a stability test, so i start rising clocks, and now, i have core 760, shaders 1877, mem 455-460
major problems?...none.
and temp dont get over 5X°
ps: srry my english, im chilean...
neruxxx 3 years ago
Comment removed
Magina33 2 years ago
what temperature do u get in full load?
Magina33 2 years ago
yes is the max safe overclock and dont corrupt your card just dont raise more oc
xeonhl2 3 years ago
Comment removed
Magina33 2 years ago
thank you man i have the same card and i want to overlock it . question : are you sur that this configuration will not corrupt my card , and is it the max that i can do ?
thanks again you are the best
m3hdim3hdi 3 years ago