ONE BAD IRON PART #2

[car2ntagger]

@ fenderstrat16 - those tank are 2.5 gallon. I have a '11 and its the same as the 883

[GHooper95]

what kind of top handlebar clamp is that? did you buy that from somewere or make it yourself?

[Customculturemax]

Very nice bike bro. Think of the rear white wall for my super low :D cheers

[fenderstrat16]

how many gallons in your tank?

[dubdisshyt1]

This seems like you got a lot of ideas from 557racing even the drilling of the short shots. That's what I think when I see this. Still looks good though! Get rid of that intake dude. It's the only ugly thing on that bike haha.

[cristhianefex]

Made me want a bike even more now thanks

[GLOCK22BYITCH]

Your not bout it. Anyone who really rides know the guys who just wana look cool. For the record the guy with the stock bike usually rides harder

[TPfaffenbach]

I saw a video once of this dudes HD Iron had two solo bags on each side. Looked like streamline saddlebags. That would look sick bro.

2012 Iron 883

[xrmarty2005]

very nice bike. I like the whole theme with all black and white accents. However, it'll never look "just right" without a hardtail section weld it on. It will change the entire profile look of the bike. With the money you spent on accessories you could have hardtail it. Check out Bitter End choppers. They seem to know a lot about hardtailing sportsters. Again, very nice bike!!!

[hefty88]

Now that a bobber man very nice now I want a 883 iron bike

[moparbrent760]

Cool

[funknando007]

I'm going to chop the rear fender myself...any advice you can give me?

[MrPouHan]

Cool ride - Great job. Keep her upright friend.

[13Geffen]

you gotta know when to stop :p

[tgumbyt]

what springer seat mounting kit did you use?

[HozM10]

Don't get offended man, Its just my opinion. I do like the white on black if that means anything!

[HozM10]

That shit looks horrible, sorry but that doesn't looked bobbed it looks like a mess. In my opinion it doesn't look cool at all!

[kibmj]

@HozM10

[agibeaut69]

Why did you put forward controls

[abunyap]

the rear fender, how is it in the rain? does it hold the water to splash all over the rider??

[sackman1886]

that's sick man... the white walls give it a fuckin gangster throwback look! (I'm in So Cal too, so could be a CA thing! haha) good look man... seriously... prob my favorite iron on youtube...

[LOS1354]

looks fucking awesome, great job!!!

[raulmedel24]

gorgeous bike..i cant deside on what bike to get..a nightster or a bobber..?

[lowlyfe1313]

@raulmedel24 can't buy a bobber..

[69warbeast69]

@raulmedel24 you have to get a nightster and turn it into a bobber

[cyberposer]

nice

[2Quickforyoumx522]

Good lookin' bike; miss the fork gators though. To me, the gators more than anything, take the bike back to the fifties.

[conwaylale]

i think your a pussy fag for ridding on a 883.

[ktgabenlil]

Sick bike. I like that you didn't go with apes. Why no springer front end?

[chchchchchc1]

its awesome dude. best iron mod i have seen. lol and just to make sure, Please dont put friggin 3 foot ape hanger bars on this thing at any time like some of the other vids. thanks. lol

[webb6669]

You copied 557racing on a lot of stuff. #notcool

[NoNinjaNo]

man this bike is my motivation! kinda sucks that you have it cause its exactly like one i have drawn up right now

[brainderailment]

Looks great, I've been brainstorming on how to tuck those tail lights into the sides a bit. Imo they stick out way too far. When you removed those lights did it look like you could have chopped the stems or is that going to be an engineer's job?

[fejzonotnot]

Very nice. Where did you get the handlebars? Looking for a set like that.

[xHEMI34]

DUDE, your bike is sick nasty bro! i went to skip fordyce to buy my 883 but ended up buying out of palm springs harley. my buddy went back and bought his forty-eight from skip fordyce though and he wants to bob it out. good job on this one though! Im keeping my 883 as blacked out as possible... ive only had it less than a month so Im workin on it!

[gregayo]

yea nice ride you have there ;)

Just missing the 883 to 1200 engine to me :D

raw !!!! !!

[funknando007]

nice bike!



[l1ttlebastard]

Nice style man.I dig your taste. Just picked an Iron this week, can't wait to mod it out. great job!!!!!

[leventi009]

would you say the rsd tracker or the sideshots sound better??

[DHRC18]

Real unique looking bike, nice job.

[br69ad]

very nice, just picked up the chrome yellow two days ago.

[TheCRAZYCANUCK89]

did the rigid struts slam the fender or did you drill new holes? and did you chop and paint the fender yourself or send it out. ive been looking into it for awhile but a little nervous about cutting the fender lol

[thekcinnay5238]

@TheCRAZYCANUCK89 once you added the rear struts it will lower the rear fender a bit but there's still a nice gap. I removed the rear fender and measured how I wanted it cut in the front. Took it to a local body shop andvhad the cut it. I guess you can to it your self at home if you have the right tools

[errickdaniels]

MAN, YOUR IRON RULEZZ!

Got mine blacked-out but really like the white stuff on yours!

Keep it up!

[mission100uk]

really nice well thought thru Iron.. you obviously know what your doing! good thing you have that spring seat.. your back will thank you for it! The tires are great.. had them on my Street bob.. nice grippy soft rubber for cornering. nice true vintage look! i went for a different look on mine.. but hey im from the UK :-)

[thekcinnay5238]

@mission100uk thanks for the comment you are right i love these tires they are great

[TheCRAZYCANUCK89]

are those 1" white walls on the front and 2" on the back? looks great doing the same thing to mine. also the was it hard to move all the wires to clean it up ?

[thekcinnay5238]

@TheCRAZYCANUCK89. Thanks. Yes they are Avon gangsters. Wide white walls. 1 inch front and 3 inch in rear. They wire. Relocation not hard at all with the tank lift

[thekcinnay5238]

@TheCRAZYCANUCK89 thanks yes they are Avon gangsters wide white walls. 1inch in front and 3 in rear. The wire urelocation not bad at all if you plan to do a tank lift.

[thekcinnay5238]

@TheCRAZYCANUCK89 yes they are Avon gangsters wide white walls 1 inch front and 3 in rear. The wire relocation not bad if you are planning to do a tank lift.

[flipverb]

I think it looks sweet man!! I'm always surprised when people need to talk shit about videos. If somethings not my taste I don't say anything. I just move on. All those personal attacks and racist remarks over not liking the way a guy tricked out his bike???! Something is wrong with that dude! Don't listen to him man and keep up the good work!

Peace!

[FerreroCollection]

awesome bike!! :D

[nyxhc93]

great job man.

[TheMryockey]

that tire will rub its ass off , ,, take a look at ,ine and see how or what you did, , isee just another ruind motorcycle, you just took a 10,000 bike and made it worth about 2 grand, , i got that brackett breaking in less than 3 thousand miles, ,

[donnickos]

so you can just remove the rubbers on the suspention?

[thekcinnay5238]

@donnickos. Do you mean the fork boot covers? If so yes they. Can be removed by just cutting the off

[donnickos]

@thekcinnay5238 ok thank you! nice bike btw

[donnickos]

so you can just remove the rubbers?

[s5vrf]

Sweet ride man! Why no forward controls? That would have been my first purchase! Also I would scrap the headlight cover thing but it's your ride and it's awesome!

[gablabelle]

So about how much did you spend ? It's simply perfect ! One day ! ;-)

[Ernsttt883]

Hello,

Thanks 4 your comment on my girlfriends Iron. Those whitewalls made your Iron special, good job!

Have fun

[demolisher88]

great work on ur bike

[imjackscoldswe4t]

Hey man I like it it looks sweet I'm a proud iron owner myself I'm currently bobbing mine out and adding a little color because I too feel that everyone has the same thing what did you cut the handlebar clamp with? Because I'm looking to do the same thing and you made your own bracket for the speedo?

[norsmetal]

You wanted comments so- Not a fan of the white seat, white grips. Not a fan of removing the shock boots. Not liking the harsh ride of no rear shocks.BUT-> Very impressed with the overall look. Very awesome mean looking bike. I'd trade you my bike right now for it.

[petrospecs]

now that bike looks cool cause it doesn't look like mine.

[bieto86]

on the forks thanks



[thekcinnay5238]

@bieto86 the reflectors on the forks and held in place by double sided tape / you can remove it by getting some cheap fishing line , or dental floss. this will not scratch your forks place the fishing line or dental floss on the top side of the reflector in between the reflector and the fork and slowly working the fishing line back and forth moving down. the reflector will just peel off .

[nelsonjv1]

Very nice bike I want to see it riding down the road

[thekcinnay5238]

Respond to this video..thank you. i will soon make a riding video 

[bieto86]

how remove reflectors?

[thekcinnay5238]

@bieto86 which reflectors the ones on the forks or in the rear

[zo0m14]

Almost exactly how I want to make mine look.. Once I purchase it of course.. Almost done with college and hoping for this to show up on graduation day :)

[thekcinnay5238]

@zo0m14 thank you. hope you get one

[mithigarcha1]

nice ride mate, like them whitewalls,, ,only thing missing is headlight relocation...when i brought mine home from dealership, that little visor on top of headlight , was the first thing to go into rubbish bin..lol..keep up the good work..cheers

[thekcinnay5238]

@mithigarcha1 tHANKS where did you get your velocity stack from?

[TheMryockey]

@mithigarcha1 what a fag, , mate, , cheers, , fuckin limeys, , im sure you pice of crap is a winner, , did you take off your fender, , lol, , wow, ,

[daruns2011]

Try puting a wide glide front ,wit a 150 tire & ur done. Make it look like a sporty on steroids.

[daruns2011]

Hey bro wuz up, i myself I'll put a wide glide on the front & put a 150 tire.

[daruns2011]

Looks good bro.

[thekcinnay5238]

@daruns2011 thank you bro "

[maikelpolini]

I love it!!

Congratulations from Spain!!

[thekcinnay5238]

@maikelpolini gracias " i am glad you like it

[nocip77]

looks great man,

[Neptunes311]

Which drag bar is it ? How tall is it ?

[thekcinnay5238]

@Neptunes311 the drag bar is from hd from online catalog the dag bars are 27'' wide 4 inch pull back and 1 inch diam