ground loop fix with mids and highs distance test

[snoopybarboza]

get ground from the radio and put it into the rca inputs and it cuts off all the noise from the ingine .

[babbaudio1]

for a fast quick to that problem..on the rca out puts of the radio run a wire to the negative of the rca"the outside part of the rca" and ground it the ground wire for the radio.i get radios in with the same problem.that workd for me.

[mmar4281990]

how come you did not use a ground loop isolator? why use a high to low 

[agog86]

just ground the rca outer jackets. also if you fix the ground loop itself you will be better off.

[kool994]

damn those amps are badass how much do one of them cos

[SFStreetBass]

@kool994 thanks man they really are there on sale for 279 at onlinecarstereo

[moddingpc]

my kenwood HU had he same fuck with motor noise.

it was the cinch ground that died.

[4thavenuenigga]

HEY I HAVE THAT SAME PROBLEM IN MY HONDA ACCORD.I HAVE ENGINE NOISE COMING THREW MY SUBS AND IT ONLY DOES IT WHEN THE GAIN IS TURNED UP AND I HAVE A PIONEER DECK.SO WOULD THAT SOLVE MY PROBLEM ALSO

[SFStreetBass]

@4thavenuenigga no i still have that problem with the gain at 12 my headunits about ready for trash. i dont know it fixed the problem with the mids but not the bass but if i find out i will let you know

[4thavenuenigga]

@SFStreetBass ALRIGHT I APPREACIATE IT

[bjones416]

@4thavenuenigga most people get that problem when they run they rca wires and power wire on the same side of the car..since the power wire comes from under the hood it can bring the sound of the engine with it and rcas pick up everything..i kno it sounds wierd the way i worded it but thats wat its coming from

[4thavenuenigga]

@bjones416 OH OK THANKS BUT I HAD SOLVED THE PROBLEM. I JUS NEEDED 4 VOLTS OUT ON MY HEAD UNIT AND IT GOT RID OF THE PROBLEM.

[Deschain420]

Damn man...wish you had posted this before fixing it. You could have tried grounding the RCA's to the head unit.

Happy to see it's fixed in any case. Personally, I've had nothing but great experiences with Pioneer.

[SFStreetBass]

@Deschain420 i tried that and it worked good for acouple days but then it started coming back again but this seems to work good and gives a clean signal up to 3/4 volume on the deck

[fisforfamous]

@SFStreetBass it did that for me too! but it came back again! fuckin pioneer. i have the deh-7800

[EXOcontralto]

I'm happy to see you, but sorry to hear about the problems :/

[SFStreetBass]

@EXOcontralto thanks bro everythings working good now all i need to do is the recone and everything will hopefully be back to normal again

[Nirvalica]

My kenwood is horrible with cd skipping. Otherwise, I like my kenwood. I had an older pioneer and never had a problem with it. Maybe I was just lucky.

[SFStreetBass]

@Nirvalica yea i had an older pioneer 2 and it was alright but they just dont make stuff the same now days

[tom58c]

I had the same problem with pioneer also. I also hate how the outputs sounds. but thats me. ive had jvc, pioneer, alpine, dual, diesel, and kenwood. I almost sware by kenwood now for radios.

[SFStreetBass]

@tom58c true i never had a kenwood but always hear good stuff about them but i had a jvc and never had this problem they dont make them like they use to oh well atleast i fixed it and sounds clear in person i hope it stays that way

[danterakin]

I have a kenwood and I get that shit when my car is on. High pitch sound gets louder as I rev up. About 70% of the time deck is good and doesnt do it but its a bitch when that high pitch noise kicks on.

[SFStreetBass]

@danterakin disconnect the rca from the headunit and see if it still dose it so you can tell if its a bad ground or the headunit itself

[danterakin]

@SFStreetBass It's kind of hard to do cause only sometimes it would do it and whenever it does do it I don't have my tools with me. I think I'm just going to solder an extra ground to the RCA's, use newer RCA's, and relocate a better ground. That better do the trick.

[SFStreetBass]

@danterakin yea true that if it dont work try what i did it will still give you a clean signal just as good as the rca you just cant put the volume level as high on the deck but if you get 1 make sure you get the pac hi to low level converter with the built in ground loop isolator

[fastlife1688]

that sucks. . . .=/ 

[SFStreetBass]

@fastlife1688 yea it did but it seems like everything is working good now just waiting on the maxlink to get a clean signal to all 4 amps and a recone soon hopefully thanks for watching