Hey I took apart my controller to paint it but now when I put it back together the front buttons don't work and neither do the sticks I plugged it into my computer and it said they were on when i moved he left stick...any way to fix this? idk if i fucked up the touch pad or what
say i pour some beer on it.. i followed your steps and stuff.. everything went well.. (note: my controller does not activate, lights dont work, charge or do anything. and its 2 months old)
as i open it i realize sticky stuff along my motherboard and also on the thin sensor sheet.. does that mean its completely gone? checked the battery with a different controllr.. and works.
Most annoyingly if your analogue sticks are "sticking" atleast to the degree mine were it's pretty much a throw-away job. It's a sealed unit on the sticks unless you want to un/re-solder, in which case you may aswell just buy a new controller. One of my DualShock's plastic roll-cage-like analogue sealed units had grinded plastic inside and worn out, that's too much gaming for ya :P
Sidenote; Cheaply made :/ would hope they'd start using optical on the sticks core rather than that shitty plastic.
@mcmanus1806 make your own stencils that what i do i do controllers and alot of kids in my school alway ask for controller to be done and hydro dipped and just stuff done with it and alot of them are very happy with results if you want stencil i suggest if you dont wana pay for it done it look up the image on google print out and take a razer blade and tape one side of blade heavy not to cut urself then take the image and cut slowly what you want i paint cars and controllers and thats what i do
@ratede91 are you an idiot moron!! what does blurriness have anything to do with your stupid comment - what a jackass -bet you never graduated high school kid!
i broke my L2 button (sixaxis controller) when i took it apart, didn't go any further than attempting to remove the batter, the button looosed up, i stuffed it back in (carefully) and put it back togheter, not it's hard to get it to react!
My right analong stick broke, i think the top got ripped of the controller stick under it! it's tilting insane in one direction, i can force it to the middle but not without difficulty and if i let it go it snaps to the side? any ideas? can i fix it by opening the controller?
Hey, I have this weird Tri-prong like piece.... It just fell out while I was fixing my controller.... So I just ignored it.... Well then My controller wouldn't turn on.... I mean all the buttons were fine, but it didn't turn on.... The LEDs blink when I plug it into my PS3, but it wont turn on.... I'm pretty sure it has something to do with the tri-prong thingy....
@B1gB0ss45 I'm not sure if you've figured it out but the tri prong goes in between the D-pad and the rubber above it. Place it so that the prong pieces are facing towards the front of the controller. It goes in diagonally so that the "top" prong goes down to the left, closest to the analog. There should be no prong at the corner furthest from the analog. Hope this helps a bit.
Dude I have some tri prong type thing, anyone know what this is? And also my L1 and L2 buttons aren't working so does anyone know why? Needing to play some COD very soon..
for people having trouble with screws its the plastic. just take out what you can an the controller should separate with Resistance but it'll come apart
thanks, after someone gave me the idea that putting talkin powder in your alaog sticks will fix them from being squeeky, it was a fail and broke them and my bottons. this helped me take it apart and clean it out and now it works better than ever. thanks :D! (Y)
YOU CAN CHANGE THE X SQUARE TRIANGLE AND CIRCLE! there will aleays be one notch on the button that doesnt fit, so what i did was bit off the piece that didnt fit and it works :) i now have 2 triangles & 2 x"s :D
hi im having a problem with my ps3 pad its only 6 month onld one day the analogs started going wild moving by themselves i couldnt even use it because couldnt move but wen i put another control pad on aswell as that the analogs stop going mad but then non of the buttons work for example the x circle triangle well all of the buttons on the front of my ps3 pad any help please
ight i took mine apart today and i kept a good eye out befor i stated takein it fully aprt and after i found out the buttons wouldnt fit i put it back together but i have a problem!!!!
it wont work...ill plug it in and the red led lights blink but it wont let me use it...can anyone help me....comment me plzz....i need HELP :/
@xXPHATglenXx Try restarting your controller. There is a very small button on the back of your controller. You will need something small to reach it. Hold the button for 5-10 seconds then try to use it. It needs to be hook up to your ps3 with the usb cord. Hope it works.
hey my ps3 controller's touch pad came off and when i put it back together it has no power what do you suggest i do and yes i wired up everything correctly so do you suggest i solder it back together?
speaking of the sixaxis ruble feature i have a controller that wont vibrate even though the vibration is on...i have to hit the side of my controller to make it work i need to figure out how to fix this someone please respond
So I Opened up the controller because the left joystick was making the system move to the left by itself even though it was straight up. Now I it's back together and none of the buttons or joysticks work and it starts to vibrate by itself . Idk what I did wrong :( everything is the same.
i watched this vid and performed surgery for 30 min. the 'x' button was sticking because of orange juice. I didn't tell my mom cause she would think otherwise. Thanks to you(The Modder), I was able to fix it with saving money, you made my day
Thanks man, both your videos (teardown and rebuild) helped a ton! Had to rip my stuff apart and clean caramel off the buttons and out of the paths. Kids...
i have an emergency question, i have previously painted my controller, and those two things on top of the R2 and L@ buttons got jammed in the thing because to overspray, I can't take them out! What can I do?
i have an emergency question, i have previously painted my controller, and those two things on top of the R2 and L@ buttons got jammed in the thing because to overspray, I can't take them out! What can I do?
when i was fixing mine something came out when i was doing it and i dont know where it goes i don't think it was important but i would like to put it back where it came from can you help, it had three prongs sticking out it looked sorta like a wind meal it was a little plastic piece.
a little bit of water fell on my ps3 controller and it won't let me use R2 and i have press the square, x , triangle, circle, have to press hard or won't work at all or sometimes it triggers another button too, everything else works fine , help will be appreciate
if u wanna CUSTOM PAINT ur controller u dont have to take apart the controller u can just put tape on the stuff u dont want painted be sure to put tape on the L3 and R3 buttons so the paint dosent get inside the controller
my controller wont charge any more after my niece drooled all over it..couldnt get mad shes too cute! can ne one help me out? i took it apart to see if anything was burned out. didnt see anything.
any idea on how to fix my X button? It feels like somethings under it, it works but its kinda hard to press. When i take a wet old tooth brush and brush around the button, it makes it easier to press but goes back to being hard again. Someone help...
But i have a question, would it be possible to take and old dualshock 2 dpad and place it in the DS3? my dpad got busted and since I have some old controllers i thought about tryin that
Can you please help me with my problem,actually its my R2 button its loose cause when you press the R2 button and L2 button you can feel the different for example when i m playing games i just no need to press the R2 button,you just touch the R2 button thats all,or you can check one of my video ps3 controller from my channel,......pls help
@flexer122 There's a little clip in-between the front and back casings. Press real hard between the joysticks on the back. When you hear a click, you can open it up.
i play mw2 and when i zoom in with a sniper and press L3 to steady it zooms out. I have opened it b4 and fixed it cuz the L3 was equal to like 4 other buttons. its linked to the L1 button somehow. Help please?
I droped my ps3 controler a few times and now when I shake It makes a rattleing noise and my vibration shakes weirdly so I disabled it. How do I fix it?
this thing was a bitch to take the screws out of...
KidGamerJoePWNS 2 weeks ago
wow they sucks made things like that why not have waterproof controller?
WWETV14Fan 3 weeks ago
it doesnt "just comes apart"
sk8erlewisss 1 month ago
dude i dont have that huge white thing and i have some stuff that look like dumbells-the left one is bigger the right one is smaller
aeroaa2 2 months ago
i dont dare because i maybe broke something
123jesda 2 months ago
I just need the thumbsticks to put in my xbox controller
ps3 sucks, i wont even put it back together!
TheLuigiManFan 2 months ago
Shake that lollipop, oooooooooOOOOoooOOOOOoooooo
vgpr03320 2 months ago
user/AKiLL471?feature=mhee
AKiLL471 2 months ago
i hurt my hand by removing the backcover
locorama123 2 months ago
Hey I took apart my controller to paint it but now when I put it back together the front buttons don't work and neither do the sticks I plugged it into my computer and it said they were on when i moved he left stick...any way to fix this? idk if i fucked up the touch pad or what
NEED HELP
xyz25games 2 months ago
BEST PS3 MODS ON MY CHANNEL!!! CHECK THEM OUT!!!
AKiLL471 2 months ago
What size of screwdriver do I need
dew1195 2 months ago
I sprayed very little water on the surface of the controller, it can't connect to my ps3, what do i do?
TheATMproduction 3 months ago
really???? i followed ur instrustions and it got my controller broken. thanks
SkeetoJeeto 3 months ago
mine couldn't come out
Skampo1119 3 months ago
say i pour some beer on it.. i followed your steps and stuff.. everything went well.. (note: my controller does not activate, lights dont work, charge or do anything. and its 2 months old)
as i open it i realize sticky stuff along my motherboard and also on the thin sensor sheet.. does that mean its completely gone? checked the battery with a different controllr.. and works.
OoRLYoO 3 months ago
my analog stick is loose ... how can i fix it ? can u
post a video on that ?
cristeladaine 3 months ago
Most annoyingly if your analogue sticks are "sticking" atleast to the degree mine were it's pretty much a throw-away job. It's a sealed unit on the sticks unless you want to un/re-solder, in which case you may aswell just buy a new controller. One of my DualShock's plastic roll-cage-like analogue sealed units had grinded plastic inside and worn out, that's too much gaming for ya :P
Sidenote; Cheaply made :/ would hope they'd start using optical on the sticks core rather than that shitty plastic.
loltldr 3 months ago
What screwdriver did you use? and the size.
greenday1347 4 months ago
i hate ps3 but i paint and sell their controllers.
kingleonitus12 5 months ago in playlist diisassembly
@kingleonitus12 hey do you know when you paint them. do you know where to get stencilys for say a tribal? like spray stencil? thanks!
mcmanus1806 4 months ago
@mcmanus1806 make your own stencils that what i do i do controllers and alot of kids in my school alway ask for controller to be done and hydro dipped and just stuff done with it and alot of them are very happy with results if you want stencil i suggest if you dont wana pay for it done it look up the image on google print out and take a razer blade and tape one side of blade heavy not to cut urself then take the image and cut slowly what you want i paint cars and controllers and thats what i do
aj68jrsens 4 months ago
Whats the diffrence withba sixaxis control and a dualshock control
em0death4 5 months ago
@em0death4 dualshock vibrate while sixaxis dosent.
taratazirl 4 months ago
Anyone know were the blu-ray antena is?
pwnyomoma 5 months ago
@pwnyomoma I mean bluetooth not blu-ray. lol x3
pwnyomoma 5 months ago
well this is clearly faked, the bottom and top do not come apart that eaily, and ive grown a 3rd hand in the process to get it back together again
skate619 5 months ago
I broke my controller... after I took an hour trying to get the fuckin' screws out.
doubleB745 5 months ago
THAT WAS DIFFICULT AS FUCK!! The xbox controllers are way easier!!
THEmomolew 5 months ago
im going blind !! I see everything blurry!! oh wait thats just your camera!
killhawk44 6 months ago
@killhawk44 congratulations! You are only a shade of retard.
ratede91 6 months ago
@ratede91 are you an idiot moron!! what does blurriness have anything to do with your stupid comment - what a jackass -bet you never graduated high school kid!
killhawk44 6 months ago
@killhawk44 Whoo! that comment was hideous! lmfao, Grammatical errors out of this world. I don't get what you are saying. Please repeat.
ratede91 6 months ago
@ratede91 oh yea ( go fuck yourself!)
killhawk44 6 months ago
@killhawk44 Hey, you know how to spell! Congratu..... hey, wait a minute! you misspelled yeah. Fucking retard.
ratede91 6 months ago
@ratede91 take your own advice! your an idiot!
killhawk44 3 months ago
@killhawk44 Umm..... what? I don't remember giving you any advice
ratede91 3 months ago
i broke my L2 button (sixaxis controller) when i took it apart, didn't go any further than attempting to remove the batter, the button looosed up, i stuffed it back in (carefully) and put it back togheter, not it's hard to get it to react!
ergerq 6 months ago
My right analong stick broke, i think the top got ripped of the controller stick under it! it's tilting insane in one direction, i can force it to the middle but not without difficulty and if i let it go it snaps to the side? any ideas? can i fix it by opening the controller?
ergerq 6 months ago
god my ps3 analog sticks are sticky as fuck
GodGivenReactZ 6 months ago
Holy shit! This shit was incredibly hard to put back together!! X)
TheVolcomDust 6 months ago 9
"Oh, it comes apart pretty easy" I just spent an hour and a half just unscrewing the goddamn screws! Nothing about this is easy!!!!
Cshizzle94 6 months ago
omfg none of the 5 screws will come out
xxDelanoy7xx 7 months ago
Thank you soo much man.
thevacasebastian 7 months ago
Check out my video on how to disassemble and reassemble a PS3 controller.... Video is in HD and is very detailed and specific
GetThisHere101 7 months ago
sorry im stupid i didnt hear you at the end
MrDb4894 7 months ago
could u make an assembly video
MrDb4894 7 months ago
common its not so easy to take apart you need some resistance
naijaboygangsta 7 months ago
.... i disassembled my PS2 controller before a long time ago... i dont know how to reassemble it xD
trapman8791 7 months ago
Hey, I have this weird Tri-prong like piece.... It just fell out while I was fixing my controller.... So I just ignored it.... Well then My controller wouldn't turn on.... I mean all the buttons were fine, but it didn't turn on.... The LEDs blink when I plug it into my PS3, but it wont turn on.... I'm pretty sure it has something to do with the tri-prong thingy....
B1gB0ss45 7 months ago
@B1gB0ss45 I just don't know where the tri-prong goes....
B1gB0ss45 7 months ago
@B1gB0ss45 I'm not sure if you've figured it out but the tri prong goes in between the D-pad and the rubber above it. Place it so that the prong pieces are facing towards the front of the controller. It goes in diagonally so that the "top" prong goes down to the left, closest to the analog. There should be no prong at the corner furthest from the analog. Hope this helps a bit.
StonerCats 5 months ago
@StonerCats I figured out... Though it didn't solve my problem... I got a new controller a while ago
B1gB0ss45 5 months ago
"Just comes apart pretty easy" my ass.
Blank00024 7 months ago 3
@Blank00024, I know tell me about it, I almost broke it trying to open it!!
hsbharath 7 months ago
i was trying to tighten my r2 button, now i have lost the tiny metal coil thing FUCK.
scooterboyelite 8 months ago
"Uhhh, ahhh, ummm, ahhh, uhhh, ummm"
DoubleDoubleEveryday 8 months ago
you seem lost...
gusani834 8 months ago
guys how the white sponges called?
!couse i need some for my ps3 controller
matanBetter 8 months ago
vif i had a dollar for every time he said uhhh i would be rich
echoDbest 8 months ago
ps3 sucks
blazefiredust 8 months ago
@blazefiredust ya mum
tikodor 8 months ago
@blazefiredust If the ps3 sucks, then why the fuck are you looking up PS3 controllers disassembly........?
royalbloodline91 7 months ago 16
@royalbloodline91 because i want to disassemble my ps3 controller
blazefiredust 7 months ago
@royalbloodline91 because im painting one for a friend
Ryanchambies 2 months ago
@blazefiredust WHY DONT YOU GO FUCK A LANDMINE!?!
TheHarpseal 7 months ago
@TheHarpseal not again! ugh fine
blazefiredust 7 months ago
WHAT DO KEEPS STICKING TO RIGHT ????
TurningPointGB 8 months ago
Dude I have some tri prong type thing, anyone know what this is? And also my L1 and L2 buttons aren't working so does anyone know why? Needing to play some COD very soon..
VexZ3 8 months ago
for people having trouble with screws its the plastic. just take out what you can an the controller should separate with Resistance but it'll come apart
TeamSTaTiic 9 months ago
As i can see, your controller is easy to open after the 5 screws.
Did you broke the clip inside ???
This shit dont let me open my controller !!!
Viki1AprilBorn 9 months ago in playlist ps3 fix
Xbox controller is so hard to fucking break unless your a fucking dumbass. And a Ps3 controller has so much unnecessary shit and fucking screws.
ZiiDoXCinema 9 months ago
@ZiiDoXCinema woot
MrRANDOM1100 8 months ago
lol below me
MrNikk2fresh 9 months ago
omg xbox 360 take apart controller is 5 times easier
justinyar77 10 months ago
@justinyar77 omg we dont care
709SubZero 10 months ago
@709SubZero whos we asshole?
justinyar77 10 months ago
@justinyar77 most of the youtubers dumbfuck.
709SubZero 10 months ago
@justinyar77 yeah it also is 5 times easier to break
guitarrmasta 9 months ago
@justinyar77 lol if u have an xbox why the fuck would you watch this video?
NinjaWee 9 months ago
@NinjaWee because i plan on using ps3 analog sticks in my 360 controller smart ass.
justinyar77 9 months ago
could you please do a video on how to get rid of stick buttons???
HazRx 10 months ago
can anyone tell me where to get a plastic case because i broke mine :/
woohooitsmee 10 months ago
Well, thank fuck i kept that novelty set of mini-screwdrivers from my Christmas cracker.
FG11ST12 10 months ago
i just broke my controller -_____-
david831ballin 10 months ago 72
@david831ballin me too
Fa1led 9 months ago
@david831ballin And whos fucking fault is that?
lordgandorf 8 months ago
@lordgandorf mine are u stupid?
david831ballin 8 months ago
@david831ballin Your acting like its the modders fucking fault ass hat.
lordgandorf 8 months ago
@lordgandorf i'm not saying its the modders fault you retarded cuntface
david831ballin 8 months ago
@david831ballin qq
lordgandorf 8 months ago
@david831ballin i think i did as well sir
DoctorBlocks 8 months ago
@david831ballin me tooooooooooooooooooooooooooooooooooooooooooooooooooooo
dabigguy6267 4 months ago
what size and type of screwdriver?
xXFrOsTyHD 10 months ago
4:51 TWSS
loveisontheairangel 10 months ago
lol i took mine apart with the same thing, i just dont wanna brake mine while taking the thing off
rocooak 11 months ago
@rocooak me to
NBCxASASSIN 10 months ago
lolli lolli 36 mafia in the background :P
If it wasn't for the tiny screws the controller would be fugly and larger. I have a grey battery in my dualshock btw
No0031 11 months ago
aw, i killed the rumble feature on my controller, the wire broke off. oh well, i never have rumble on anyway, cool vid
NoUserNamesLeft007 11 months ago
can u do a vid on how to put leds in the ps button plzzz
ovadabars 11 months ago
thanks, after someone gave me the idea that putting talkin powder in your alaog sticks will fix them from being squeeky, it was a fail and broke them and my bottons. this helped me take it apart and clean it out and now it works better than ever. thanks :D! (Y)
MakeMeLaughComedy 11 months ago
my friends tell me xBox360 is best. the 360 is for when u run in circles tryin to get away lol
TheSoonerfan444 11 months ago
i did all that but when I put it together, my controller kept displaying 4 flashing lights and wouldn't sync with my PS3! Whats happened?
clodester 11 months ago
YOU CAN CHANGE THE X SQUARE TRIANGLE AND CIRCLE! there will aleays be one notch on the button that doesnt fit, so what i did was bit off the piece that didnt fit and it works :) i now have 2 triangles & 2 x"s :D
scootersrbrad 11 months ago
this video saved me from buying a new controller. thanks!
hidanprimedude 1 year ago
I got my bright ass1234 & PS LED mod kits from a guy called 'axidy' on ebay uk
he gave me the best quality LED kits with the most informative instructions!!!
AKiLL471 1 year ago
haha i cant get my controller apart it is stuck in the front
legithacks11 1 year ago
I can take it apart easily I'm just having trouble putting it together right.
PoketheHyena 1 year ago
i can only get 2 screws out plz help
xCoDsFiNeSt1 1 year ago
hi im having a problem with my ps3 pad its only 6 month onld one day the analogs started going wild moving by themselves i couldnt even use it because couldnt move but wen i put another control pad on aswell as that the analogs stop going mad but then non of the buttons work for example the x circle triangle well all of the buttons on the front of my ps3 pad any help please
310807foreva 1 year ago
i want to take apart my controller and my ps3 so i can duracoat it.
andrademeza 1 year ago
My L2 and R2 buttons aren't the same after dissasembling..
DinAlaska 1 year ago
@DinAlaska I know mine too they feel more loose and feel less responsive since you really got nothing to lose just try opening them again.
Mattdude411 1 year ago
ight i took mine apart today and i kept a good eye out befor i stated takein it fully aprt and after i found out the buttons wouldnt fit i put it back together but i have a problem!!!!
it wont work...ill plug it in and the red led lights blink but it wont let me use it...can anyone help me....comment me plzz....i need HELP :/
xXPHATglenXx 1 year ago
@xXPHATglenXx Try restarting your controller. There is a very small button on the back of your controller. You will need something small to reach it. Hold the button for 5-10 seconds then try to use it. It needs to be hook up to your ps3 with the usb cord. Hope it works.
prettyboi194 1 year ago
hey my ps3 controller's touch pad came off and when i put it back together it has no power what do you suggest i do and yes i wired up everything correctly so do you suggest i solder it back together?
flexer122 1 year ago
speaking of the sixaxis ruble feature i have a controller that wont vibrate even though the vibration is on...i have to hit the side of my controller to make it work i need to figure out how to fix this someone please respond
alexfart67 1 year ago
rofl i have a little black piece of plastic left over.
thewhakka 1 year ago
@thewhakka
me too...
:D
greenwoodonearth 1 year ago
u sir just saved me from having to by a new controller :)
lakseman 1 year ago
I cant get da friggen screws out, what does the screwdriver have to be microscopic?!?!?
jored7 1 year ago 29
@jored7 get a nail driver and prick the little thing in the screws out
EnvyControllerz 10 months ago
@jored7 true
feffontes 9 months ago
i cant take the middle screw out for some reason
FaceStewie 1 year ago
@FaceStewie
lol same problem i cant take left upper screw out
naijaboygangsta 7 months ago
im struggling with putting ps buton back on i have the rubber bit the ps button and this little black ring thing which order do they go on ???
woody0wnSall 1 year ago
This has been flagged as spam show
click my channel to find out how to get a 10 doller ps3 controller
BASHMAN9t5 1 year ago
So I Opened up the controller because the left joystick was making the system move to the left by itself even though it was straight up. Now I it's back together and none of the buttons or joysticks work and it starts to vibrate by itself . Idk what I did wrong :( everything is the same.
tadeo55 1 year ago
i watched this vid and performed surgery for 30 min. the 'x' button was sticking because of orange juice. I didn't tell my mom cause she would think otherwise. Thanks to you(The Modder), I was able to fix it with saving money, you made my day
barretpaige14 1 year ago
thx ima try this later i need to clean the inside cus the buttons are kinda sticky and stuff thx for the vid helpfull
ericklandiamix 1 year ago
What can I clean the inside of the controller with?
tadeo55 1 year ago
@tadeo55 with a Q-Tip. don't be afraid to use alot of them. You don't want little bits of cotton getting stuck inside the controller.
barretpaige14 1 year ago
Is the DualShock 3 any different when it comes to disassembly? I don't want to open it up just to make things worse.
xOmniCloudx 1 year ago
thx for the video it really helped out
jordanrc97 1 year ago
Thanks man, both your videos (teardown and rebuild) helped a ton! Had to rip my stuff apart and clean caramel off the buttons and out of the paths. Kids...
Lakvin 1 year ago
i have an emergency question, i have previously painted my controller, and those two things on top of the R2 and L@ buttons got jammed in the thing because to overspray, I can't take them out! What can I do?
poomasterfu 1 year ago
i have an emergency question, i have previously painted my controller, and those two things on top of the R2 and L@ buttons got jammed in the thing because to overspray, I can't take them out! What can I do?
poomasterfu 1 year ago
do I screw clock-wards to remove or to lock it????
DontFuckWitDreDay 1 year ago
@DontFuckWitDreDay
when you screw remember righty tighty( clockwise) lefty loosey (counter clock)
Terence5Hotz 1 year ago
What is a dual shock
JaySon2jet 1 year ago
@JaySon2jet it vibrates
x1schenectady1x 1 year ago
the focusing was making me sick.
b2x15 1 year ago
when i connect my controller to get charge my controller doesnt respond why?
javierlot123 1 year ago
@javierlot123 probaly a bad cotroller
LILTBALLEN 1 year ago
much thanks
exlax00 1 year ago
is there a mod where i can put the stuff in a ps3 controller into a xbox controller it feals better in my hands please help
coolknowhow 1 year ago
This has been flagged as spam show
@coolknowhow yeah sub to my channel i will show you ;)
zDunnyy 1 year ago
when i was fixing mine something came out when i was doing it and i dont know where it goes i don't think it was important but i would like to put it back where it came from can you help, it had three prongs sticking out it looked sorta like a wind meal it was a little plastic piece.
thejvictor94 1 year ago
@thejvictor94 yeah me 2.. where did that thing come from?? let me know if you figured it out!
DangerDarf 1 year ago
can't get mine open -.-
vafaneh 1 year ago
How to fix rumble? One of mine ripped and now PS3 controller won't turn on D=
AnnoyingEvilKid 1 year ago
a little bit of water fell on my ps3 controller and it won't let me use R2 and i have press the square, x , triangle, circle, have to press hard or won't work at all or sometimes it triggers another button too, everything else works fine , help will be appreciate
Dros95ss 1 year ago
thanks man
pattymk3 1 year ago
your a superhero. thankyou so much
pattymk3 1 year ago
if u wanna CUSTOM PAINT ur controller u dont have to take apart the controller u can just put tape on the stuff u dont want painted be sure to put tape on the L3 and R3 buttons so the paint dosent get inside the controller
liersz 1 year ago
sorry guy but FUCK YOUR CAMERA
Bubesheimer 1 year ago
my anolog stick is fucked up how do i fix it?
guillermo316 1 year ago
my controller wont charge any more after my niece drooled all over it..couldnt get mad shes too cute! can ne one help me out? i took it apart to see if anything was burned out. didnt see anything.
freddydigi 1 year ago
I need help does anyone know where the piece that looks like a 3 wing propeller goes? It dropped off the controller when I disassembled it.
filiwian 1 year ago
any idea on how to fix my X button? It feels like somethings under it, it works but its kinda hard to press. When i take a wet old tooth brush and brush around the button, it makes it easier to press but goes back to being hard again. Someone help...
LilBig47 1 year ago
this tutorial made me fucking break my controller. ive wasted so much time my shape buttons wont work they are like collapsed in its bullshir
DJSsKaTe 1 year ago
@DJSsKaTe Mabye you messed something up, it worked fin for me.
snowymech 1 year ago
hey nice video definately helpuf.
But i have a question, would it be possible to take and old dualshock 2 dpad and place it in the DS3? my dpad got busted and since I have some old controllers i thought about tryin that
swiftydfanno1 1 year ago
hwat about the rumlble motors?
DJmackeral 1 year ago
my square button wont work. and its a hassle as i play a lot of mw2 snd.
someone help please
brancOKuz 1 year ago
This has been flagged as spam show
my ex squere triangle circle l2 r2 wont work..can u help by any chance
mightynorteno 1 year ago
my ex squere triangle circle l2 r2 wont work..can u help by any chance
mightynorteno 1 year ago
my ex square circle triangle l2 and r2 wont work..can u help me by any chance
mightynorteno 1 year ago
Can you please help me with my problem,actually its my R2 button its loose cause when you press the R2 button and L2 button you can feel the different for example when i m playing games i just no need to press the R2 button,you just touch the R2 button thats all,or you can check one of my video ps3 controller from my channel,......pls help
88PROMAX 1 year ago
no matter wut i do my F****** controller wont come apart and who ever reads this no i will not break it
flexer122 1 year ago
@flexer122 There's a little clip in-between the front and back casings. Press real hard between the joysticks on the back. When you hear a click, you can open it up.
JHeimStudios 1 year ago
@JHeimStudios thanks but i knew that 2 late that little clip broke but i was still able to put it back together and take apart more easily now
flexer122 1 year ago
i play mw2 and when i zoom in with a sniper and press L3 to steady it zooms out. I have opened it b4 and fixed it cuz the L3 was equal to like 4 other buttons. its linked to the L1 button somehow. Help please?
drag0n0wnz09 1 year ago
I droped my ps3 controler a few times and now when I shake It makes a rattleing noise and my vibration shakes weirdly so I disabled it. How do I fix it?
undisputed4life 1 year ago