@kuksfux No, he was green as grass baby! Too bad too... If he wouldn't have had that minor problem at the starting line, he probably would have won that huge national event he was racing at. What a bummer...
@PauliusBa yeah i mean besides the fact that they are lighter stonger cheaper to upgrade and build making them the obvious choice for any high horsepower drag car they suck right.....
Dude can you imagine what it's like to be this guy in real life knowing that everyone on youtube watched his car get raped up the ass by the black hand of death and face the humiliation wearing a priceless face once inspecting the rear haha!
Thats not a ladderbar it's the torque bar that runs up to the tranny. he probably ripped out his stock 4link mountings like pulling the lid off a can of spam. (not that I'm insinuating that hes running fake and bake show meats) 9" slicks will get you into the low 10's and that's probably an 11 or 12 second car at best. he's wasting power trying to turn the extra mass and those cars arent light but golly don't it look fast.
Come on, guys... Bottom line is that it is a street passenger car. It was designed to look fast and sound good, but it was engineered to have Mom drive the kids to school.
If you do the mods under the hood, you need to take it all the way...
yeah, if you look at 0:23 you can see that there is some kind of four-link setup going on, well actually going OFF. but apparently the weld job was bad
You're an idiot. GM makes cheap piece of shit rear ends, and suspension, which is why high HP camaros swap in Ford 9" rear ends. Notice it wasnt the rear end that broke, the rear end was still intact. It was the piece of shit camaro that couldnt hold onto it.
They stopped making Camaros cause of imbeciles like you.
Hell yeah! I wouldn't be mad either. If that happened to me and nobody taped it then I'd be mad. Besides with every brake down a race car only comes back stronger.
How did you tards manage to turn this into a Ford/Chevy/Dodge flame war? The guy in the video appears to have a poorly installed *aftermarket* ladder bar setup.
That was great! Mythbusters "proved" that it's not possible to yank out the rear end by chaining it to a pole. This guy didn't even need the chain! Hilarious!
what happened was the car was sitting to low and the wheel hit the top of the gard when he took of the weels jamed onto the body rolling the back end of the body,got some power in that engine dude..if you what to go faster put orgonite in your air filter..as much as you can..
Everyone's an expert here. Anyone can order stuff from Jegs and attempt to weld up a race car. Most tracks barely do any inspection to the slower cars, I'm surprised more stuff like this doesn't happen. This was "probably" the result of poor welding, improper fasteners, or weak hardware store rod ends.
Oh man that sucks! I guess he should have used grade 8 mounting bolts..lol. Glad it happened on take off, half way down the track it would have been nasty.
GM cars?? you think GM is responsible for a completely rebuilt car or heavily modded car breaking?? It's the driver's or the builder's fault for not using the right parts, not installing it right, or not checking for wear.
haha stay in the car , they will move it .
loveofchem 1 week ago
How im bare ass ing.lol...............
loveofchem 1 week ago
This has been flagged as spam show
Show me the carfax
Horn0816 7 months ago
The car was not modified properly thats for sure
supramanz 8 months ago
FIRE YOUR WELDER !!!
akaknocksville 8 months ago
that rear end is like ahhh damn dude im a little tired, you just go on without me
stingraystud 11 months ago 4
FAAAAAAAAAAAAAAAAAAAAAAAAAAAIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIL
david888962 11 months ago
That guy is still winning!
wmmhmpun 1 year ago
After all that, it gives him a little bump in the butt. LOL
robkal56 1 year ago
only american cars. imports ftw:)
btrak08 1 year ago
@btrak08 If you put an import engine on the same rear end, it'll last forever.
wildbloodydragon 8 months ago
Did he redlight?
kuksfux 1 year ago
@kuksfux No, he was green as grass baby! Too bad too... If he wouldn't have had that minor problem at the starting line, he probably would have won that huge national event he was racing at. What a bummer...
StickShiftRacer 1 year ago
He didn't have his Traction Masters adjusted right...lol
StickShiftRacer 1 year ago
WTF???
nacho588425 1 year ago
f***ing lol :D
jelle3951 1 year ago
funniest thing i've seen
808motox 1 year ago
is that there wutcha all call a quick change rear end?
xntRick01 1 year ago
lol ( american muscle)
mega0876 1 year ago
sweetheart you did tighten the u bolts on the lafs right.. ugh,, yeah now can we go get that ring
indyboom 1 year ago
that's ok, those wheels didn't look right on it anyway...
Shaggyshadric 1 year ago
stupid fuck
metalplayer34 1 year ago
fail'eh?
DJpikkupiru 1 year ago
shoulda had some upgraded trailing arms!
UBeesh10 1 year ago
Domestic
TheKoreanX 1 year ago
the ford 9" didnt wanna be on the chevy anymore
hcnr32 1 year ago
Oh, how I loved prepped tracks. :)
skater7b 1 year ago 3
omfg now that was fuckin funny
bikerkid5689 1 year ago
Hahahahhaa fail xDD
55Sezii55 1 year ago
Is it made in China? O.o
MrTelepuzikas 1 year ago
may a sugest maybe a 3rd link, or 4th link, hell even a 5th link?
666posiedon 1 year ago
@666posiedon
a 5th link huh? i dont know about that
stifmiester2010 1 year ago
@stifmiester2010 sarcasm lol
666posiedon 1 year ago
@666posiedon no such thing as a fifth link dumbass
ben38619 1 year ago
@ben38619 well no shit? its called humor. go find some
666posiedon 1 year ago
lol
lexusdude1 1 year ago
Live axles SUCK HARD. I HATE DEPENDENT SUSPENSIONS, they are useless.
PauliusBa 2 years ago
Comment removed
dylandavey 1 year ago
@PauliusBa yeah i mean besides the fact that they are lighter stonger cheaper to upgrade and build making them the obvious choice for any high horsepower drag car they suck right.....
blackscanberacisttoo 1 year ago
@PauliusBa Try putting 500 horsepower through a CV axle a few times and see what happens
stifmiester2010 1 year ago
0:22 AMERICAN ENGINEERING FAIL HAHAHAH dumass niggas
k00lball3r 2 years ago
That's why the invented traction bars LoL!
97stscaddy 2 years ago
@97stscaddy traction bars were invented in what the 60s? wow
stifmiester2010 1 year ago
looks like someone needs to learn how to weld a little better haha.
brittanybia 2 years ago 20
some serious power to rip the diferential from the drive shaft lol
420burnzy18 2 years ago
what really happened to the back wheel?
picososo 2 years ago
LOL!
AnathemusVideos 2 years ago
This comment has received too many negative votes show
Not suprised, its an American car xD
ProjectVRD 2 years ago
thats fucking hilarious!!!!!!! were just laughing with ya shooter!
MrBigkong 2 years ago
Dude can you imagine what it's like to be this guy in real life knowing that everyone on youtube watched his car get raped up the ass by the black hand of death and face the humiliation wearing a priceless face once inspecting the rear haha!
AnathemusVideos 2 years ago
maybe he needs to go to a good welding school?!!
MrBigkong 2 years ago
@MrBigkong maybe this has nothing to with welding at all?!
ben38619 1 year ago
needs moar duct tape
mnschneider 2 years ago
Guess those grade 0 bolts weren't that great of a deal...D'ohhh!
o2boutdoors 2 years ago
nice one
crazyAlexander23 2 years ago
well theres your problem... its got a bowtie!
MOPAR OR NO CAR!!!!
mike3684 2 years ago
AHHAHA
xXShadowRejectsXx 2 years ago
you can see it break during the warm up burnout.
timbermax 2 years ago
wtf was that that is some crazy shit LOL
bulletfingrz 2 years ago
hahahahahahahahahahahaha
phonix032 2 years ago
That would be a great commercial for slicks, implying how sticky they are.
kcole939 2 years ago
HAHAHAHA You're right!
wally2714 2 years ago
shouldve gotten a ford rear end asswipe
highway955 2 years ago
@highway955 that is a ford rearend, asswipe, secondly that isn't even a problem with the rear end itself, more or lesss the way it was put together.
ben38619 1 year ago
holy crap that would suck!!!!!!!!!!
dodgefreak68 2 years ago
hey!!! another use for duct tape... yeeehaaa
codyhusky1 2 years ago
LAWL
T51RSilvia 2 years ago 2
customized chevy camero: 30,000$
drag run at the track :12$
the feeling you get when your rear axle can go farther than the whole car : priceless
jmac530 2 years ago 22
@jmac530 nice.......lol
jajam6 1 year ago
@jmac530 Learning how to spell "CamAro?" Even more priceless.
mattorama 1 month ago
Haha...wow... I don't even know if I could be mad after that. Thats kinda sweet.
LDSBASS 2 years ago
He gets out...looks at the diff...wonders for a few seconds...
"Shiiiiiiiiiiitt..."
wildbloodydragon 2 years ago
Who welded that shit? He could have got you killed if it broke on the other end......
Mr572u 3 years ago
WOW i bet he is sick to his stomach lol
warpaws86 3 years ago
whats the diff between a 4 link and ladder bars?
APontiacof455cubes 3 years ago
I'm just funnin on him. He's probably in the high 10's low 11's
torchmann4801 3 years ago
Thats not a ladderbar it's the torque bar that runs up to the tranny. he probably ripped out his stock 4link mountings like pulling the lid off a can of spam. (not that I'm insinuating that hes running fake and bake show meats) 9" slicks will get you into the low 10's and that's probably an 11 or 12 second car at best. he's wasting power trying to turn the extra mass and those cars arent light but golly don't it look fast.
torchmann4801 3 years ago
I bet that dude is like.... wtf
BackAlleyPB 3 years ago
lol
blindinglight619 3 years ago
lmao!! poor dude thats gotta suck
rebelpride2011 3 years ago
HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHaHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHA
danishdude82 3 years ago 2
Use a bigger hammer next time.
Laxpowertoo 3 years ago
That was cartoonly funny!
Haaaaaaaaaaaa Haaaaaaaaaaa!
xtrawalk 3 years ago 2
hhahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahahaha
hahahahahahahahha that was fucken funny
mickster026 3 years ago
Come on, guys... Bottom line is that it is a street passenger car. It was designed to look fast and sound good, but it was engineered to have Mom drive the kids to school.
If you do the mods under the hood, you need to take it all the way...
jmar1371 3 years ago
Looks like he DID do the rear. Camaros don't have room for 12 inch wide slicks.
He did something wrong and used inferior parts.
Hell it looked hideous all jacked up anyway. I am sure the rear suspension geometry was all wrong and caused it bind and break.
Dummerd 3 years ago
yeah, if you look at 0:23 you can see that there is some kind of four-link setup going on, well actually going OFF. but apparently the weld job was bad
razer1000 3 years ago
LOL ROFL LMAO HAHAHAHAHAHA! ...poor guy, though...
W16isrock 3 years ago
HAHAHAHAHAHAHAHAHAHAHAHAHAHA! now thats funny. you should have used a real camaro 67 68 or 69.
dmfb68 3 years ago
You're an idiot. GM makes cheap piece of shit rear ends, and suspension, which is why high HP camaros swap in Ford 9" rear ends. Notice it wasnt the rear end that broke, the rear end was still intact. It was the piece of shit camaro that couldnt hold onto it.
They stopped making Camaros cause of imbeciles like you.
S3George066 3 years ago
wow how does that happen
augustsky555 3 years ago
aaaaaaaaaaaaaa
crazyphsyco10 3 years ago
that really sucks
Yago174 3 years ago
SHIIIITTT!!! hahahaha LMAO!
erzea 3 years ago
damn
jn20000 3 years ago
I'll get the duct tape....
NintendoGuy99 3 years ago 2
just after hed set off "i think ive left the kettle on because something doesnt feel quite right"
lilemotom 3 years ago
that's why you race Ford's!
MustangFoxBody88 3 years ago
i bet he was like, AH, PISS!
StealthMonkey25 3 years ago
Hell yeah! I wouldn't be mad either. If that happened to me and nobody taped it then I'd be mad. Besides with every brake down a race car only comes back stronger.
boxerbart 3 years ago 3
wow thats crazy shit.
psychotic22 3 years ago
ahahahahahah!!!!!
DFA1989 3 years ago
kaajkakjajakkkaakjakjaka
harleyNSX 3 years ago
Lmfao!
DamnitHurley 3 years ago
HAHAHAHAH
CamaroTBI 3 years ago
So thats what those bolt were for!
Ausibattler 3 years ago 4
jajajajajaja k pringui!
downhillalbert 3 years ago
HAHA
gregallburn22 3 years ago
It could be those left over parts that caused the problem. gl
videoaccess001 3 years ago
thats funny as hell
shippuudenfreak 3 years ago
how much for the rear end??
JoeSparro 3 years ago
umm..actually the first time i ever saw this actually happen was to a fox body FORD MUSTANG it was all over a hot rod mag. Rearend came right out..
454SSGUY 3 years ago
WOW !!
sleephero92 3 years ago
How did you tards manage to turn this into a Ford/Chevy/Dodge flame war? The guy in the video appears to have a poorly installed *aftermarket* ladder bar setup.
doyley1999 4 years ago 4
If fords rule, then why don't you look up fords?
Madman299 4 years ago 2
Now THAT'S what I call a "funny" car!
MildlyAnnoyedAHM 4 years ago 3
stupid people maybe the guy that built the car forgot to tighten a few bolts or he is very stupid but gm will kick fords ass any day.
TRTC360 4 years ago
Typical GM
Anyone can work at McDonalds and race a Chevy:
Real men save up and buy mopars:
rcfreak7777 4 years ago
I love chevy, sadly, i'd have to agree with you.
randydelpriore 3 years ago
Cool........... If ever started racing i would buy a chevy because i could afford to race one...
rcfreak7777 3 years ago
you should get an award for your incredible grammar skills mustang dud! haha
deing is incorrectly spelled RAY!
rcfreak7777 4 years ago
that is bad news
Chevykidz28 4 years ago
jelek bgt!
sihxu 4 years ago
you need to bolt it in, not use sheetrock screws
prophetarisn 4 years ago
:43 "Daaaaaamn boyyyyah!" LOL classic good ol' boy.
SenorSpielbergo787 4 years ago
OMFG That's hilarious. And then the guy gets out and is like "What?!?!" LOL
AthensBlueG35 4 years ago
FORD SUCKS DICK
kingmovie 4 years ago
This comment has received too many negative votes show
typical chevy junk - FORD RULZ!
blitz811 4 years ago
BUILT FORD TOUGH....
...with GM parts.
eyehateevery1 4 years ago
you must hate everyone because you wake up every morning realizing that gm is Ford's bitch.
blitz811 4 years ago
pffft, who ever told you that was wrong....
a stock chevy can out pull, out last, and out run any stock ford of the same class
eyehateevery1 4 years ago
hey dreamer - time to wake up!
blitz811 4 years ago
thats what your mom said about my dick
honestabe08 4 years ago
Ya and that's cool.Keep token homes.Peace to you.
genaralsnizz 4 years ago
Calm down hygrow and smoke some hydro bro.I'm only kidding.
genaralsnizz 4 years ago
That was great! Mythbusters "proved" that it's not possible to yank out the rear end by chaining it to a pole. This guy didn't even need the chain! Hilarious!
raceofgiants 4 years ago 3
dang. i hate it when that happens.
corvette6698512 4 years ago
This comment has received too many negative votes show
Ha HA Mustangs Rule Camero Drools. LOL
sugarcube1980 4 years ago
what happened was the car was sitting to low and the wheel hit the top of the gard when he took of the weels jamed onto the body rolling the back end of the body,got some power in that engine dude..if you what to go faster put orgonite in your air filter..as much as you can..
primal111 4 years ago
Everyone's an expert here. Anyone can order stuff from Jegs and attempt to weld up a race car. Most tracks barely do any inspection to the slower cars, I'm surprised more stuff like this doesn't happen. This was "probably" the result of poor welding, improper fasteners, or weak hardware store rod ends.
oldrustycars 4 years ago 2
LMAO, the guy must have been "WTF" and when he saw that he was like "oh shit"
Tallacus 4 years ago
That's what happens when you get a Camaro!
genaralsnizz 4 years ago
not really...thats what happens when ya do a crappy installation, and have an even crappier mechanic.
kornmix 4 years ago
hhhh
XD
3yyar 4 years ago
Oh man that sucks! I guess he should have used grade 8 mounting bolts..lol. Glad it happened on take off, half way down the track it would have been nasty.
rustang6869 4 years ago
lol
funny
Speedjunkie713 4 years ago
XD ....
bnz500 4 years ago
lucky not at 100mph
mydogmika 4 years ago
Hahahahahahahahaha! That was awesome.
ProductionDesignrMAX 4 years ago
ya GM cars
uuzoom 4 years ago
GM cars?? you think GM is responsible for a completely rebuilt car or heavily modded car breaking?? It's the driver's or the builder's fault for not using the right parts, not installing it right, or not checking for wear.
hombre3000 4 years ago
Thats a new one.
alphaq40 4 years ago