damn, i looked it up. looks simple as shit! you should show a video of your revo without the body on. only because i dont want to buy the conversion itself, cause i already have the tekno conversion.
If this is an E-Revo with the 2 speed upgrade then it's not even recommended that gears be changed on the fly, the transmission is different from the nitro auto 2 speed. Now if it were a brushless conversion, then thats different.
This is actually no e-Revo. He was times a Revo3.3. The entire cost me 900CHF (800USD). It is with brushless motor, controller, lipo, and the brackets.
Then again kahmen approximately 500-600USD for the drive of steel, stronger differential
mine looks exactly the same wow
TheBisquik 7 months ago
how fast top speed? please reply
JacobMorrell 8 months ago
any temp problems with the esc?
JacobMorrell 10 months ago
Ja reicht vollkommen aus
Jatoboy 11 months ago
Du fährst also mit 1 Lipo 4s 5000mah,ist das richtig?wenn ja,reicht es aus?
nitrotec34 11 months ago
wow tell your track to get those plastic gutter peices lay them down instead of tires. and get alll those rocks off
and buiild jumps out of dirt
staticxmako 1 year ago
why 2 speed?
not enough torque?
nainladen 1 year ago
@nainladen Not sure why. Deff. not a lack of torque though.
Drivinfast247 1 year ago
@nainladen because it used to be the 3.3 nitro.....nows its been converted to a brushless motor
cgspeeddemon1 1 year ago
what conversion is this? im pretty sure its not the gorillamaxx...looks like tekno rcs conversion. my revo has the tekno conversion.
mahjongcrow 2 years ago
No is from Rc Monster
Jatoboy 2 years ago
hows the conversion? meaning is it bolt on or do you have to fabricate? i should look that up.
mahjongcrow 2 years ago
damn, i looked it up. looks simple as shit! you should show a video of your revo without the body on. only because i dont want to buy the conversion itself, cause i already have the tekno conversion.
mahjongcrow 2 years ago
you should convert it to nitro dude.
iamcyberpunk68 2 years ago
whats your best time man?
dendralla 2 years ago
shitty song,
itsangelico 2 years ago
Song is Drowning pool - Bodies
tastemyscythe89 2 years ago
no its not
Kingbiker96 2 years ago
good vid
moss1transcendant 2 years ago
song sucks
FTWLOLZBBQ 2 years ago
what is the name of the song?
hondatmx 2 years ago
Bodies by Drowning pool
timmytime1793 2 years ago
no its not
Kingbiker96 2 years ago
@Kingbiker96
your right feigao make the whole motor
timmytime1793 2 years ago
why do all rc truck videos have to torture us with this god awful song??
pickensr08 2 years ago
i agree hey... is the 2 speed pointless on a brushless? adds weight too?!
jonnyd19864 2 years ago
If this is an E-Revo with the 2 speed upgrade then it's not even recommended that gears be changed on the fly, the transmission is different from the nitro auto 2 speed. Now if it were a brushless conversion, then thats different.
acalthu 2 years ago
what u mean?
tcy109 1 year ago
it used to have a better song, but copywrite crap from utube made them change it
slashracer111 2 years ago
i good the same prob with the copywrite !! so i had to change my songs !! grrr !!
Joziebee 2 years ago
but not reliable
mh509 2 years ago
plz wat is da number of the steel spur gear? am asking coz the spur gear (stock upgraded to brushless) is totally deformed. sorry bad english:b.
bugjoke489 2 years ago
Nice, still think you could hav pushed it loads harder on the ramps : )
jon2cool 2 years ago
is it true that the vxl motor is a feigao
timmytime1793 3 years ago
No this is not VXL, this is a feigao9xl motor
Jatoboy 3 years ago
i know but aren't the vxl motors made by feigao
timmytime1793 3 years ago
Um no, as far as I know they are Novak, but I'm no expert, I have a feigao9xl in a lowered wide emaxx
somedudeandacomp 2 years ago
no i know for sure now feigao makes the mill for traxxas and traxxas makes the rotor
timmytime1793 2 years ago
How much does it cost to put a brushless motor in a E-revo? plz reply
9mike10 3 years ago
This is actually no e-Revo. He was times a Revo3.3. The entire cost me 900CHF (800USD). It is with brushless motor, controller, lipo, and the brackets.
Then again kahmen approximately 500-600USD for the drive of steel, stronger differential
Jatoboy 3 years ago
wats the music? PLZ
gogypoop13 3 years ago
Last Resort-Paparoach
tcy109 3 years ago
what kind of motor is in there NOVAK? NEU? MEDUSA?
kevin1032v 3 years ago
No this is a feigao
Jatoboy 3 years ago
oh sorry missed it it says its a 9xl thanks
kevin1032v 3 years ago
how much was it making it 2 speed
kevin1032v 3 years ago
cool truck but the track looks boring
yoyoitsmario 3 years ago 2
the music doesnt let me hear it change gears. next time, dont put music. :)
shadowblaze6391 3 years ago 8
i felt like the boss, the boss want to quit.
snapywrist 3 years ago
* Brushless-ready 2-speed transmission with metal center idler gear !!! ¿¿¿???
jav24438 3 years ago
how did you make it 2 speed
kevincaparot1 3 years ago
Because I blocked the original gearbox was the steel gears by Robinson Racing
Jatoboy 3 years ago
i could see why iwould never sell something like it but anyways nice vid awesome e revo
kevincaparot1 3 years ago
Convert right if so what did you use
AYCTB 3 years ago
thinking of selling it
kevincaparot1 3 years ago
Sorry no, is my favorite car. I probably never sell.
Jatoboy 3 years ago
u should put some extra weight on the front to stop wheelies
jmey107 3 years ago
Yes exactly :) No find it so cool
Jatoboy 3 years ago
Nice,but u said 2 speed yet I cant hear it shift over the music
Kevster012 3 years ago
great truck
rcwor1d 3 years ago
hi are u having any heat issues nice video
863carlitos 3 years ago
nice cousre thing!!!!
Brothers221 3 years ago
That vid rulez :D
tbvdb 3 years ago 4