Upgrade my homemade visco fuse machine

[dstnlockwood77]

Is it cheaper than buying it? I need an alternative for buying online

[AVISTINKY]

@bangbang51211 hey! I use regular BP that I put into a funnel above the first plate. you can't see that because in the video I took it out, but now it's there [=

[gotmilck]

can you do another video with more details on the bottom of the plates more exactly on the gears of the 2 spinning discs and the disc that spins the opposite direction , I'm building one right now and that is the part that kinda stops me thx

[MrAirshot]

at last my visco machine is done ,i just need the cotton thread

so what mix you use as fuel ,my only problem i dont have sulfur , so what a mix can i use for slow and Continuous flow when light it up

[AVISTINKY]

@MrAirshot If you don't have sulfur, I think you can try to make "sulfurless black powder", the composition is:

50% KNO3

25% C

25% sugar

but it will be better with normal black powder (75 KNO3, 15 C, 10 S)

good luck!

[chaosinhell666]

@MrAirshot you get sulfur from garden shop 99.9% purity that what i use 15 bucks for 500g's

[MrAirshot]

what is the diameter of the fuse ,it looks about 4mm is that so?

[AVISTINKY]

@MrAirshot The diameter of the finish fuse is 2.5 mm, 4 mm is huge!

[TheAllimania]

@AVISTINKY whats the advantage of bigger fuses? i only find 3mm to buy. they wont stop to burn that easy, could that be?

[lovegunz1]

did you make it from plans or what

[AVISTINKY]

@lovegunz1 No, without any plan, I built it alone [=

[MrAirshot]

how did the bicycle chain engaged with the die make it turn ?

[AVISTINKY]

@MrAirshot It's hard to see, but I put a small gear around the die so it turns all the plate

[Reirarx]

Hate u u smart man !!! dont be on youtube go to nasa :P Just kidding :] love the vid and the machine !!!! nice work :P but where is the bp?

[AVISTINKY]

@Reirarx hahahaha thank's man! I love u too =P

The BP is in a funnel that I put over the first plate, u can't see this in the video [=

[9DragonMaster]

bravo!

[AVISTINKY]

@9DragonMaster Thank you [=

[daron69]

awesome fuse i made a machine but didnt work to well yours seems to make a nice thick fuse:)

[megara13]

thanks man!

[assaf127]

תותח אתה!

[megara13]

what motor do you use and how many rpm is it?

[AVISTINKY]

@megara13

The motor is one of two motors that I used when I was seven years old for a toy tractor [=

[megara13]

can you share photos of your machine?i plan to make one..

[AVISTINKY]

@megara13

Hello, If you want to take a look, I made a sketch of the machine, There is a link in the description.

[megara13]

looks perfect!

[AVISTINKY]

@megara13 Thanks!! =D

[teachmemagic2]

i was planning to rebuild mine... i dont have the time :( MAKE ME ONE

[AVISTINKY]

I know the situation :)

start to build it and do it slowly... anytime you can work on it, do it! =P