Goodbye "NEW" Clutch...WTF

[Andyb2637]

Good Job!



[fuckingkidsthesedays]

DRONE!!!!!!

[Braskus]

The worst part is how much of a bitch it is to change it..

[willneverstop]

u installed it wrong

[weewoodeal]

@willneverstop HHAHAH how do you even know that... u just post random ass things you THINK are fact and you just like messing with ppl.

[diemf50]

u didnt put it in right prolly....

[kingbiker666]

dum ass



[sk8ersr20]

gotta love them s14's

[819sebas]

that is what happend when you dont put some oil between the friction plates while assembling!!!!!!!!

[93martinl]

@819sebas i hope that was sarcasm >.<

[JBWDC3]

could be the flywheel was bad and ate up the new clutch, also with any clutch you install you gotta drive it critically for the first 500 miles to break it in or that could happen also

[nextrider123]

Cable or hydraulic if cable might need adjusted

[AwesomeCade]

great video.

[duramaxjad4]

The clutch wasnt bad its just a stupid ricer that didnt know nothing installed it and didnt adjust it right

[98integraGSR]

@duramaxjad4 you can throw a VSS code if the ecu reads the car as being in gear and revs don't match expected VSS output.

[RicerEater1978]

wow, wish i could see the fucking dash

[zObdayzzz]

ya i was gonna say your supposed to break it in for around 500 miles. but even with break in their are defective clucthes fuck theirs defective everything in this world!

[polarablues64]

@zObdayzzz including your English, evidently.

[zObdayzzz]

@polarablues64 could it be my english, or just a lack or care in spelling for youtube? one could ponder....one sure could ponder.

[RyanTwister]

I couldn't tell if something was wrong or if u just don't know when to shift up.

[toy200sx]

Pointless video. What a waste of time.

[GhostRider3149]

This a zenki or kouki?

[SidewayzinLV]

You are all retards. They sent me a defective clutch. The whole face peeled off with in a mile of putting it in...

[Chaoutzu]

@SidewayzinLV Nice comment.. people like you are probably the same kinda guys that get a clutch, slap it in, and go beating on it, then throwing your hands up in the air wondering why its not working.. You can't go calling people retards when all you post is "brand new clutch going out"

[matthewrockslol22]

@SidewayzinLV were the retards maybe u shouldnt buy defective clutches you fucking POS learn ur shit befor u go buy a shitty clutch from some bean in the ghetto

[2CoolF0rSch00l]

@matthewrockslol22 You could fuck up the clutch yourself! When it spins in 7 rpm its expected to move your car...

[SICKSxNINE]

@matthewrockslol22 you seem kinda pissed.

[genmaxpain]

@SidewayzinLV yeah well new clutches are ment to be run in like new brake pads lol also your check engine light is on maybe it was human error(YOU) that caused it to fail

brake pads, clutche,s flywheels, disc rotors, and engine bearings and rings are all parts that HAVE to be run in when i say run in i do not mean thrash the shit out of it i mean 1000Km min distance by treating it nice and carefull like you would a baby and not treat it like your gf thrashin n a bashin lol

[IrnMaiden304]

better make sure you didn't put the old one back in, idiot

[Daniel5478]

@IrnMaiden304 Lol that is freaking hilarious

[HinduWreck420]

this happens when u dont break in clutch for 500 miles

[Mr98SupraMan]

did you bleed your clutch?

[S14VH45]

what kind of clutch was this? pedal adjusted properly? you'd have to really hit something with a hammer to make your brand new clutch slip. doesnt matter how you break it in, wont slip straight away if everythings put together properly.

[jayguy173]

needs adjusting probably

[tmitchell6]

your a idiot.

[sweetazzmofo]

@tmitchell6 Its "'you're an idiot".

I believe you are the idiot hahahahaha

[UBERKron]

new clutches need a week of gentle driving. who lets a car leave the shop with engine check light on?

[masterqaz]

could also be grease etc on one of the surfaces that grab

[masterqaz]

seen this before, several things can cause it, my buddies vr6 did the same thing, his TOB was messed the srung fingers on the pressure plate where warped the friction disc was cooked to the rivets and the center spline on the disc was loose, as well as a partially cooked/heated flywheel.

seeing as its new, someone either didnt replace something, installed it incorrectly, or you heated your fly wheel by not breaking it in from being ignorent or excited to have a new clutch

[Decapitator08]

did you clean the glaze off the flywheel?

[qazwas2001]

was this right after it was installed, like within minutes? The break-in period is critical, or this happens.

[dudemate78]

@qazwas2001 yeah u gota run it in no going hard for a fare bit

[mossyoak12356]

get the fly wheel resurfaced and follow the break in procedure dumb ass

[Jappie112]

youre check -engine light on the gauge is also on. There might also be another problem. or maybe its installed incorrectly, like the other guy said.

[GT40RK24EG6]

CEL has nothing to do with clutches

[quicklude]

yeah umm... theres a reason why most clutches have a certain mile break-in period... (NO NEAUTRAL DROPS!!!!!)

[5point0guy]

clutch master cylinder prolly, of the goon didnt install it right

[Datsrboi]

Did you follow break in procedures or are you like the many idiots who just slams on it out the shop?

[vileCR999]

So are those super sweet Drift-Spec clutches covered under warranty? Or is this an Extra Warren Gee feature? ;)