i had no backlight so i got a new lcd and replaced it as you have stated in previous psts but i stillam getting no backlight from the screen. anything you can think of?
@RepairsUniverse no i dont think so it just stopped working when i pulled it out my pocket the glass was craked but working and the lcd had no backlight
@richards0170 Normally, if the backlight is still not functioning correctly after a LCD replacement it means there is an issue with the motherboard. Sadly not many ways to resolve this issue easily, besides a motherboard replacement, to our knowledge.
Is this the same way to replace the glass of the I touch because I bought some itouch with a whole mess of scratches on the glass itself I'm not not sure which it witch between the LCD and digitizer it just has scratches on the outer layer
@LoneWolf3061 Yes, nearly the same process is used to replace the glass touch screen digitizer (this is the part scratched on yours). We do have a video showing the process (on a 2nd gen, which is very similar).
@RepairsUniverse well theres a thing .im afraid of messing up and breaking my ipod for good. ive seen comments on other videos of the same topic saying the screen doesnt turn on .is there a way were i can get another person who can do it for me that has experience?
Can you send me the links for all of these items used in this video? Most of the items on that page you put in the description are for 2nd generation and up.
@waddledee1000 Follow the link and select the correct generation. All parts currently available will be shown for that specific generation. Tools can be found in the "Repair Tools" section.
@dan54175 If you are referring to the mid section, you can attempt to re-use, but replacement is recommended. You can find these, among other parts for your iPod Touch at RepairsUniverse (dot) com.
Mine wont come apart. I stripped down the two plastic pieces trying to get it apart. I tried putting a razor in there to pry it and the blade broke. WTF
@midashaltzern You can try heating the adhesive a bit before using a pry tool to lift it. Use a hair dryer or heat gun and run it along the outside edges quickly and that should solve the issue. Good luck!
ok i commented on the other vid nd den i found dis 1 .. bt ok i have the 1st generation ipod .. nd i was trying to sync it with my computer and then the screen jus cut off and went blak .. now it wont tturn on or nothing .. do yu have any suggestions or may know what the problem is with it ?
I have an iTouch 2g which was working for 2y .I got it from my pocket and i saw a white screen and i tried to charge it like one other time.I tried MANY times and nothing.I tried ALL combinations like home but.+ sleep but.BUT I am not sure if it is a hardware or software problem because I left my ipod w/o using it for 6months and the battery completely died and when I charged it it worked normally for about 1hour but It did it only 1 time.I am thinking to buy an lcd screen.What do you think?
So i have a ipod touch 1st gen, if i the ipod turns on but only shows a white screen, i prob should replace the LCD right? and i can buy the lcd from your site? Please help
My 1st gen iphone upper portion of the screen buttons do not work. The bottom half I can use the apps,but nothing happens when i push the upper. Do you have the fix for that?
hi can some one please help me. i have like dead pixels on my itouch like gray lines going accross my itouch. if i replace the digitizer will this fix the dead pixels? please please help.
I have also a problem with my ipod touch. The backlight didnt work for about 6 months and then suddenly it works for 15 minutes but now the back is black again. What can I do or is there a chance that my ipod will work again?
@radiky Sounds like the backlight on the LCD screen is bad. To repair this you will need a new LCD screen. We provide these replacement iPod Touch LCD screens on the RepairsUniverse (dot) com web site.
ok here is my problem, i put my touch on a charging dock and i left it for an hour, i come back and there was this little tiny dot like size of a grain of sand and day after day it got bigger and bigger now its the size of a 10c coin (Australian) money. Its not getting any bigger and the touch screen still works perfect even when i touch that large dot but its really annoying will replacing the LCD fix this or is it something else?
@SpEaKeRfReAk123 Hi, yes it sounds like "LCD Bleeding". You will need to replace the LCD screen to fix this issue. We have the iPod Touch LCD Screen replacement parts on the RepairsUniverse (dot) com web site.
What if it was dropped and the screen cracked. Yet it still worked, but there were little lines appering more and more day after day? And is there a video that runs you through putting it back together?
@MrJ0mc Is this the glass the is cracked? If so you should replace the glass touch screen digitizer asap to stop it from getting worse. And also to stop it from damaging the LCD screen.
This replacement part is available on the RepairsUniverse (dot) com web site.
so what happened to my girlfreinds itouch is she dropped it and the outside glasss thing cracked. the itouch still works fine its just the screen, so would that fix it? and how much would it cost?..because iwas planing on just buying her a new one :D
@arraste1 We have the glass screen digitizer for $29.99 on the repairsuniverse (dot) com web site. You can install yourself or RepairsUniverse installation cost is $34.99.
are you able to fix my ipod touch 1st gen. It works but the light doesnt i can barely see the screen its dark. i tried seeing if its the settings for the brightness but no. I was told it was do to water damage. but cant it be replaced with a new digitizer?
You will need a replacement LCD Screen, as this is what does the display including the brightness. The digitizer is the touch screen and has no effect on the brightness etc.
so when this is all reassembled, the touch screen works ok? (if everything is put back in place that is...) I am confident in being careful in doing this on my own, but I don't want to ruin the sensitivity of the touch screen if I replace the LCD screen...
yeh mate im 14 got it 4 crimbo n dropped it i need sum-1 2 do this 4 meh cuz ill brake it moore would i be able 2 send it to you and you can fix and ill pay u and all
My 1st gen iPod Touch 16gb got water damage today. I put it in rice for a while and now it turns on. The touch screen doesn't work though. What should I do?
ohh shit the under neath of that is broke :'(
Keeler232012 3 weeks ago
what if your screen fell off :D
Keeler232012 3 weeks ago
i had no backlight so i got a new lcd and replaced it as you have stated in previous psts but i stillam getting no backlight from the screen. anything you can think of?
richards0170 1 month ago
@richards0170 Can be a motherboard issue. Any history to the device - such as previous repairs, water damage, major drops, etc?
RepairsUniverse 1 month ago
@RepairsUniverse no i dont think so it just stopped working when i pulled it out my pocket the glass was craked but working and the lcd had no backlight
richards0170 1 month ago
@richards0170 Normally, if the backlight is still not functioning correctly after a LCD replacement it means there is an issue with the motherboard. Sadly not many ways to resolve this issue easily, besides a motherboard replacement, to our knowledge.
RepairsUniverse 1 month ago
Need step by step putting it back together
GhostmysteryGhost 1 month ago
@GhostmysteryGhost Re-assembly is a very simple process. You can follow this video in reverse, this will show all steps required.
RepairsUniverse 1 month ago
They should make a led iPod 6th gen
xsolo3 1 month ago
Is this the same way to replace the glass of the I touch because I bought some itouch with a whole mess of scratches on the glass itself I'm not not sure which it witch between the LCD and digitizer it just has scratches on the outer layer
LoneWolf3061 2 months ago
@LoneWolf3061 Yes, nearly the same process is used to replace the glass touch screen digitizer (this is the part scratched on yours). We do have a video showing the process (on a 2nd gen, which is very similar).
RepairsUniverse 1 month ago
@RepairsUniverse well theres a thing .im afraid of messing up and breaking my ipod for good. ive seen comments on other videos of the same topic saying the screen doesnt turn on .is there a way were i can get another person who can do it for me that has experience?
LoneWolf3061 1 month ago
@LoneWolf3061 Many local repair shops can preform this repair. Also many "send-in" repair shops are competent.
RepairsUniverse 4 weeks ago
Can you send me the links for all of these items used in this video? Most of the items on that page you put in the description are for 2nd generation and up.
waddledee1000 5 months ago
@waddledee1000 Follow the link and select the correct generation. All parts currently available will be shown for that specific generation. Tools can be found in the "Repair Tools" section.
RepairsUniverse 5 months ago
Okay.... I understand to take out the screws and what not but how do you assume that I put all back together.
angelet92 6 months ago
@angelet92 Simply reverse the steps shown in the video.
RepairsUniverse 6 months ago
what happens if tjhe plastic wich connects the front screen rips
dan54175 6 months ago
@dan54175 If you are referring to the mid section, you can attempt to re-use, but replacement is recommended. You can find these, among other parts for your iPod Touch at RepairsUniverse (dot) com.
RepairsUniverse 6 months ago
Mine wont come apart. I stripped down the two plastic pieces trying to get it apart. I tried putting a razor in there to pry it and the blade broke. WTF
midashaltzern 8 months ago
@midashaltzern You can try heating the adhesive a bit before using a pry tool to lift it. Use a hair dryer or heat gun and run it along the outside edges quickly and that should solve the issue. Good luck!
RepairsUniverse 8 months ago
not first gen
albertanonstoptowing 9 months ago
@albertanonstoptowing By the look of the back cover, it totally is.
pspcow 6 months ago
My iPod has like these two semi big gray lines crossing each other what can I do about that?
krazygal323 10 months ago
@krazygal323 Your LCD screen is damaged. You will need a replacement LCD screen from RepairsUniverse (dot) com to fix this issue.
RepairsUniverse 10 months ago
This has been flagged as spam show
i just found out how to hack wifi with my iphone, ipod touch and ipad!! iwifihack . net
HobertKania 10 months ago
This has been flagged as spam show
Hey guys! I though i would share with you THE BEST app for ipod touch and iphone! iwifihack (dot) net
TarahLesne 10 months ago
This has been flagged as spam show
This iwifihack . net app made my ipad (also works on iphone and ipod touch) hack wifi networks
PiaGoryc 10 months ago
This has been flagged as spam show
ok i commented on the other vid nd den i found dis 1 .. bt ok i have the 1st generation ipod .. nd i was trying to sync it with my computer and then the screen jus cut off and went blak .. now it wont tturn on or nothing .. do yu have any suggestions or may know what the problem is with it ?
MilliDollaJaYT 10 months ago
I have an iTouch 2g which was working for 2y .I got it from my pocket and i saw a white screen and i tried to charge it like one other time.I tried MANY times and nothing.I tried ALL combinations like home but.+ sleep but.BUT I am not sure if it is a hardware or software problem because I left my ipod w/o using it for 6months and the battery completely died and when I charged it it worked normally for about 1hour but It did it only 1 time.I am thinking to buy an lcd screen.What do you think?
theopaul713 10 months ago
@theopaul713 Yes, it sounds like the LCD screen is damaged and needs replacing.
You can find the LCD screen replacements and other iPod repair parts at RepairsUniverse (dot) com
RepairsUniverse 10 months ago
So i have a ipod touch 1st gen, if i the ipod turns on but only shows a white screen, i prob should replace the LCD right? and i can buy the lcd from your site? Please help
SuperTekWorld54 11 months ago
@SuperTekWorld54 Yes, the LCD screen needs replacing. You can find these screens on our site at RepairsUniverse (dot) com
RepairsUniverse 11 months ago
txns yall, dis was very helpful
rafaelbsypher 1 year ago
@rafaelbsypher Glad it helped!
RepairsUniverse 1 year ago
I just replaced the screen, but for some reason the touch screen doesn't work. HELP PLZ!
twinspak 1 year ago
@twinspak you need new digitazer
FightWithDevil 1 year ago
thanks for putting this video it really help me alot nd it save me some money :)
MrKingronaldo 1 year ago
@MrKingronaldo No problem. Happy to hear we could help.
RepairsUniverse 1 year ago
My 1st gen iphone upper portion of the screen buttons do not work. The bottom half I can use the apps,but nothing happens when i push the upper. Do you have the fix for that?
dustoff2007 1 year ago
@dustoff2007 Yes, the touch screen is bad. You will need the touch screen replacement. You can find these at RepairsUniverse (dot) com
RepairsUniverse 1 year ago
hi can some one please help me. i have like dead pixels on my itouch like gray lines going accross my itouch. if i replace the digitizer will this fix the dead pixels? please please help.
0igo 1 year ago
@0igo Hi,
To fix the dead pixels issue you will need a replacement LCD screen. This replacement parts are available on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
hey my ipod touch the 1st Gen doesnt want to turn on and i try restoring it but it doesnt restore it just freezes and stops
THEZILLACLANS 1 year ago
Does anyone know how I can fix the ribbon on the wifi antenna for the 1st gen. It had snapped and I am desperate to fix.
Pwnage4evar 1 year ago
I have also a problem with my ipod touch. The backlight didnt work for about 6 months and then suddenly it works for 15 minutes but now the back is black again. What can I do or is there a chance that my ipod will work again?
radiky 1 year ago
@radiky Sounds like the backlight on the LCD screen is bad. To repair this you will need a new LCD screen. We provide these replacement iPod Touch LCD screens on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
ok here is my problem, i put my touch on a charging dock and i left it for an hour, i come back and there was this little tiny dot like size of a grain of sand and day after day it got bigger and bigger now its the size of a 10c coin (Australian) money. Its not getting any bigger and the touch screen still works perfect even when i touch that large dot but its really annoying will replacing the LCD fix this or is it something else?
SpEaKeRfReAk123 1 year ago
@SpEaKeRfReAk123 Hi, yes it sounds like "LCD Bleeding". You will need to replace the LCD screen to fix this issue. We have the iPod Touch LCD Screen replacement parts on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
Can do this with my new ipod touch? I just got it one week ago --'
twist127 1 year ago
What if it was dropped and the screen cracked. Yet it still worked, but there were little lines appering more and more day after day? And is there a video that runs you through putting it back together?
MrJ0mc 1 year ago
@MrJ0mc Is this the glass the is cracked? If so you should replace the glass touch screen digitizer asap to stop it from getting worse. And also to stop it from damaging the LCD screen.
This replacement part is available on the RepairsUniverse (dot) com web site.
RepairsUniverse 1 year ago
so what happened to my girlfreinds itouch is she dropped it and the outside glasss thing cracked. the itouch still works fine its just the screen, so would that fix it? and how much would it cost?..because iwas planing on just buying her a new one :D
arraste1 1 year ago
@arraste1 We have the glass screen digitizer for $29.99 on the repairsuniverse (dot) com web site. You can install yourself or RepairsUniverse installation cost is $34.99.
Much cheaper than a new one :)
RepairsUniverse 1 year ago
Comment removed
fortdeathskull 1 year ago
awsome video great instructions thanks nice to see some people like to help and not just wanting money to help someone out A++++++++++++++
cryptic765 2 years ago
are you able to fix my ipod touch 1st gen. It works but the light doesnt i can barely see the screen its dark. i tried seeing if its the settings for the brightness but no. I was told it was do to water damage. but cant it be replaced with a new digitizer?
liljokerfly 2 years ago
Hi,
You will need a replacement LCD Screen, as this is what does the display including the brightness. The digitizer is the touch screen and has no effect on the brightness etc.
RepairsUniverse 2 years ago
Thanks so much!! Worked like a charm!! Saved me a lot of Money!!!
johnfscott 2 years ago
Glad we could help!
RepairsUniverse 2 years ago
so when this is all reassembled, the touch screen works ok? (if everything is put back in place that is...) I am confident in being careful in doing this on my own, but I don't want to ruin the sensitivity of the touch screen if I replace the LCD screen...
Monkeychunks8690 2 years ago
Yes, if everything is done correctly and put back together it won't effect the touch screen at all. It will be exactly the same.
RepairsUniverse 2 years ago
yeh mate im 14 got it 4 crimbo n dropped it i need sum-1 2 do this 4 meh cuz ill brake it moore would i be able 2 send it to you and you can fix and ill pay u and all
fuckitsgay 2 years ago
Yes we do. You can find the repair services on the RepairsUniverse (dot) com web site.
RepairsUniverse 2 years ago
My 1st gen iPod Touch 16gb got water damage today. I put it in rice for a while and now it turns on. The touch screen doesn't work though. What should I do?
CJ8084 2 years ago
@CJ8084 theres nothing you can do :L
fursie09 2 years ago
niceee.. i was looking for this...
vm0nge 2 years ago 2
Glad we could help.
RepairsUniverse 2 years ago