@gamax92 VIS codes had not been developed and were not used when the 8-second BW mode was in vogue. However, frame sequential RGB color using 8-second frames may use VIS codes of 1, 2, and 3 preceding R, G, and B frames respectively.
15 lines are transmitted each second followed by a 5 ms sync pulse (at 1200 Hz), yielding a video line length of 61.6666 ms. Divide this number by the number of pixels you have to send per line, and follow it with 5 ms of 1200 Hz horizontal sync.
Hi! I'm an artist based in London. I'm really interested in converting images to sound, and then assimilating them as images again. Could you please tell me if there is a way of transmitting an image from one laptop to another, across a gallery, using sound, during a live performance please? How would I even start investigating this? Thanks for uploading! hope you can help me. Jon
@5UP7 Thank you for getting back to me. Do you know how I would convert a b&w image into sound and then reassimilate it as an image again? It doesnt necessarily have to be across a room. Can you direct me to a website please that would explain how to do this? i love the noise, and the images!! I think it is really really interesting.....and what would happen with the extraneous sounds and reverberation? would it simply not work at all? or would it interfere with the image? sorry to pester you!
@starmagstarmag At a very fundamental levels, fax machines convert pictures to sound (so they can travel over telephone lines), and back to pictures again.
However, it would be more practical to use slow-scan television or facsimile software running on a PC with a sound card to perform this function.
> and what would happen with the extraneous sounds and reverberation? would it
> simply not work at all? or would it interfere with the image?
@starmagstarmag that would be possible with error correcting codes, most of communications channels we use nowadays have noise,so codes have been developed so this can be corrected on the fly(think all the noise that is on the wifi and cellphone frequencies). You should use a different format for the images, unless you want to see it working "on the fly" as error correcting codes would require more information to be transmited.
@philipacentaur This was written in 'C' under Linux. There is no plan to release it at the present time since it is still a "work in progress". However, I recently completed some new hardware, and expect to generate some companion software to permit the generation of more SSTV video clips from my audio tape archive that goes back over 30 years. :-)
@philipacentaur This was done using a combination of several small programs and scripts that I hobbled together rather quickly. Certainly nothing really polished or formal. The software that generated the SSTV audio, however, may get released some day as it may actually serve a useful purpose to a general population. Currently, I am using it to provide test signals to my homebrew SSTV demodulator and video scan converter, and it works rather well.
@italicus84 Or get MMV2WAV from the same site you got MMSSTV :) Can convert the mmv files recorded by mmsstv itself to wav and that way eliminate any possible artifacts caused by stereomix or whatever. I used that "audacity record and save" method too before I found this.
I wish I could do that, but my stupid USB headphones overrun any sound input capability for my whole computer unless it's going into the built in microphone. Useless.
I started doing SSTV with a ROBOT hardware unit. We would save tones on a cassette, otherwise you only got one look, as the image disappeared off the screen.
Another classic TV mode check out NBTV. There are some example clips here on YouTube.
Now, with sound card software pictures on HF have post card quality.
this is a lie, i recorded it its nothing. i did the sstv signal
anoori9000 3 weeks ago
Very nice! the only problem is that there's no space between the pics!
NoDisslike 1 month ago
Comment removed
apopheniacMCMLXXXIX 1 month ago
@gamax92 VIS codes had not been developed and were not used when the 8-second BW mode was in vogue. However, frame sequential RGB color using 8-second frames may use VIS codes of 1, 2, and 3 preceding R, G, and B frames respectively.
15 lines are transmitted each second followed by a 5 ms sync pulse (at 1200 Hz), yielding a video line length of 61.6666 ms. Divide this number by the number of pixels you have to send per line, and follow it with 5 ms of 1200 Hz horizontal sync.
5UP7 1 month ago
Hi! I'm an artist based in London. I'm really interested in converting images to sound, and then assimilating them as images again. Could you please tell me if there is a way of transmitting an image from one laptop to another, across a gallery, using sound, during a live performance please? How would I even start investigating this? Thanks for uploading! hope you can help me. Jon
starmagstarmag 2 months ago
@starmagstarmag Sorry to say, but this would never work with all the extraneous sounds and reverberation present in the room. :-(
5UP7 1 month ago
@5UP7 Thank you for getting back to me. Do you know how I would convert a b&w image into sound and then reassimilate it as an image again? It doesnt necessarily have to be across a room. Can you direct me to a website please that would explain how to do this? i love the noise, and the images!! I think it is really really interesting.....and what would happen with the extraneous sounds and reverberation? would it simply not work at all? or would it interfere with the image? sorry to pester you!
starmagstarmag 1 month ago
@starmagstarmag At a very fundamental levels, fax machines convert pictures to sound (so they can travel over telephone lines), and back to pictures again.
However, it would be more practical to use slow-scan television or facsimile software running on a PC with a sound card to perform this function.
> and what would happen with the extraneous sounds and reverberation? would it
> simply not work at all? or would it interfere with the image?
Probably both (total disaster).
5UP7 1 month ago
@starmagstarmag that would be possible with error correcting codes, most of communications channels we use nowadays have noise,so codes have been developed so this can be corrected on the fly(think all the noise that is on the wifi and cellphone frequencies). You should use a different format for the images, unless you want to see it working "on the fly" as error correcting codes would require more information to be transmited.
Aqlor 1 month ago
@starmagstarmag i think you could do it if you used radio
bben95 1 month ago
nifty! musical and text sounds like barber clippers!
MaryStewart 4 months ago
is this alien audio porn?
TheChickenrun3 8 months ago
Fascinating.
There's a piece of software for Mac called MultiScan - it does the same thing for HAM radios.
SuperTechieJ 9 months ago
It comes out diagnol for me
Mylenthes 10 months ago
pause at 0:53
and 1:25
and 1:33
Jarkkoreviews1 10 months ago
very cool
Jack14112 10 months ago
it may be 120x120 pixels but its still more HD than minecraft =P
ipaqmaster 10 months ago
at 0:27 (Grey) it sounds like boo from mario games
Rebel056 1 year ago
@Rebel056 well now you know it was a SSTV color image XD
camperian04 10 months ago
This is B/W what?
SNESIvan 1 year ago
@SNESIvan B/W 8 =)
ipaqmaster 10 months ago
Cool. In what language did you write this software, and is there any chance of you sharing the code?
philipacentaur 1 year ago
@philipacentaur This was written in 'C' under Linux. There is no plan to release it at the present time since it is still a "work in progress". However, I recently completed some new hardware, and expect to generate some companion software to permit the generation of more SSTV video clips from my audio tape archive that goes back over 30 years. :-)
5UP7 1 year ago 2
@5UP7 And here I was, hoping that 'C' under Linux was the answer to that part of my question. Anyway, great stuff and thanks for sharing.
philipacentaur 1 year ago
@philipacentaur This was done using a combination of several small programs and scripts that I hobbled together rather quickly. Certainly nothing really polished or formal. The software that generated the SSTV audio, however, may get released some day as it may actually serve a useful purpose to a general population. Currently, I am using it to provide test signals to my homebrew SSTV demodulator and video scan converter, and it works rather well.
5UP7 1 year ago
@5UP7 what prog do u use?
NGBatNICdotMIL 10 months ago
So is there any possible, simple way to input an image in a computer program and have it translated to a SSTV "Song"?
rockcabbage 1 year ago
@rockcabbage MMSSTV does that. Simply record the wave audio with audacity while the program is playing the image. it works perfectly.
italicus84 4 months ago
@italicus84 Or get MMV2WAV from the same site you got MMSSTV :) Can convert the mmv files recorded by mmsstv itself to wav and that way eliminate any possible artifacts caused by stereomix or whatever. I used that "audacity record and save" method too before I found this.
Filmer1eX 2 months ago
I liked the part where there was an annoying beeping sound.
picaticatara 1 year ago
I wish I could do that, but my stupid USB headphones overrun any sound input capability for my whole computer unless it's going into the built in microphone. Useless.
JackBond1234 1 year ago
MMSSTV wil decode this.
I started doing SSTV with a ROBOT hardware unit. We would save tones on a cassette, otherwise you only got one look, as the image disappeared off the screen.
Another classic TV mode check out NBTV. There are some example clips here on YouTube.
Now, with sound card software pictures on HF have post card quality.
RagsTTiger 1 year ago
and MMSSTV can't decode this.
kargaroc386 1 year ago
lol Mr. Bean
robinheil 1 year ago
this is soooo cool, i was syncing the audio with MMSSTV and it actually works :D
Ihaveapsp 2 years ago
0:43 scared the fuck out of me
CptainDaniel 2 years ago
@CptainDaniel me too haha
JimmyUnlimit3d 1 year ago
ok i shant see this anymore, play this and do not see it and see what i mean
elendless 2 years ago
SCIENCE
AcousticMinja 2 years ago 8
Fascinating.
Thanks to the video game "Portal," I am looking into what this is. Very neat.
breadtruck1978 2 years ago 113
Me as well.
KoiKamiMauro 2 years ago 26
yeah same here, i heard about this but back then i thought it was usless. not anymore.
Hikikomorisama 2 years ago 6
@breadtruck1978 Hehe. same here.
dude195 2 years ago
@breadtruck1978 same
AMFxCful 2 years ago
@breadtruck1978 yeah me too
psp3602 1 year ago
@breadtruck1978 OMG ME 2!!! XD
MrUbister 10 months ago
Very Clever.
raccoonnyc 2 years ago
Very cool, I remember watching this mode on old home built display. I was able to get MMSSTV to decode the audio from the video! Randy
K7AGE 3 years ago 3
My MMSSTV decoded it but it was all slanted! I need to make some adjustments!!
tribalmasters 2 years ago 3
On my PSP SSTV decoder, it slants from right to left going down, at about a 120 degree angle. I calibrated it to MMSSTV, which I calibrated to WWV.
Amishman35 2 years ago
Hah, Rowan Atkinson.
TheSwillMan 3 years ago 3