How To Build A Skateboard Mini-Ramp

[sheonlim94]

How do you draw the transition? 

[tkrjoet15]

@BMXDood2 Your an idiot, even in your name you spelt dude wrong and BMX" gives away that you ride a BMX not skateboard so shut up.

[legolover189]

ok so yeah how much does all tht cost?

[BMXDood2]

Aha Gay Ramp dood too steep and too small..what is that 2 ft off the ground..My 6 year old cousin rides ramps better than that

[JebachSM]

but..isn't it soft..i think that it will snaps when you get to the top ?

[TvMxMoDz]

nice ramp like it, cant wait to build mine nice job bro

[ikergama]

Nice job bro thanks. Can't wait to build mine tomorrow ...

[fairfulleuan]

Anyone who has built this know how much it cost?

[45danil]

thats not too steep thats perfect nice job bro

[SmokinGunVids]

@45danil thanks man glad you like the vid

[AsianSkater235]

damn chill the fuck out you fucking cock licker

[SmokinGunVids]

@AsianSkater235 well, fucks me off, its obviously not too steep if it perfectly skateable

[AsianSkater235]

thats not a mini ramp thats just a Quarter pipe and thats to steep

[SmokinGunVids]

@AsianSkater235 come to my house and fucking ride it, then tell me its too fucking steep

[thomasjefferson991]

What about coping bro

[Curry3659]

so who here realized that this isnt a mini...?

this is a quarter pipe...

[YumYumsTV]

think ply?

[SmokinGunVids]

yeh it is pretty steep, but like i said in preious comments, perfectly skatable

[RideFlyBikes1025]

Your transition need to be longer, thats pretty steep for that small of a ramp man.

[blackwhiteninja94]

My dad says it cast about 100 I have to plywood 5of them so he is making 5of them yaya

[SmokinGunVids]

@blackwhiteninja94 awesome bro good luck!

[KingT331]

What about the coping ?

[SmokinGunVids]

@KingT331 just an old scafold poll, you can pick them up anywhere mate

[beany118118]

sweet but tip if you are putting it inside you can have mdf and it is cheaper than plywood im making a miniramp with it

[TheFaydeProject]

How much will it cost?

[SmokinGunVids]

@TheFaydeProject depends, 120 at the most

[PsychoMunky420]

Sweet, been wanting to make a mini for a long while now, one thing though, you left out the part about adding the coping to the top of the mini. How does that part go? I would hate to make one incomplete or catch a snag or make it shit!

[SmokinGunVids]

@PsychoMunky420 its actually not as hard as it seems buddy, of you follow all these exact steps then there is a considerable amount of space at the top so it would be pretty much imposible to make without a coping, just drill three holes through a scafold pole, roater it out to the screew dont stick out and cause any problems, just stick in some 6" screews then your laughing :)

[OrigamiiBoy13]

how are u ganna skate with converse dude

[SmokinGunVids]

@OrigamiiBoy13 in extreme pain my friend, i was waiting for my DC's to come in the post hahah!!

[coastercrazy999]

@OrigamiiBoy13  converse do skate shoes you know :)

[rsels14]

what are the demensions of your ramp ?

[imalmostskater911]

how much did it cost for all the wood and stuff

[jeususrocks797]

tanks you vid was very helpful me and my dad are going to build won

[SmokinGunVids]

nice man, now get a skateboard and stop using this video as an advertisment page in ya local news paper

[xXPiggieExtremeXx]

Hey guys i got the sickest project coming at cause im pretty good at scootering and bmxing so im build a little project with my dad in my backyard...its basiclly gonna be a fence of are bye like 30x30 with a half pip,2 quater pipes,a spine and a rail and its gonna be so sick so come check out my channel with in a month or two for progress and tutorials thanks guys!

[CamelWithCrocs]

we got it for 120 quid

[CamelWithCrocs]

like it a lot

[CamelWithCrocs]

making the ramp cheers for the help.

by the way got it for 120 quid

[gavinthegreat1998]

can u build one and send it to me

[TheAsd323]

dude nice me and my friends just started ill try this thanks bro

[TerrorofDeath111]

my friend try to bend plywood, lets just say his arm didnt bend like the wood

[Kushkr3w]

it's about $250 in wood, atleast mine was but mine was 6' tall, and 5' wide. (With metal coping, & a sheet of metal at the bottom for better & smoother riding) 

[iguanitasguapas]

me has ayudado mucho gracias !

[noobsruspure]

@SmokinGunVids dude how long did it take to make i really want to know cus im thinking of making one =)

[weejames2000]

thank you for uploading this vid it was very helpful thanks

[SmokinGunVids]

@weejames2000 no worries man, glad it was helpful :)

[IIDR4GZx]

Thx So Much But What Is The Overrule Price About £70 ?

[SmokinGunVids]

@MrKevinandi all together about £50 mate

[CamelWithCrocs]

you must have used rubbish wood.

we spent 120 quid

[hutch1234100]

Thank u so much

[penmarker453]

i like your video it can be very usful

[Themega007man]

thank you soooo much! :)

[penmarker453]

your video is great and yousful

[SmokinGunVids]

@penmarker453 cheers man

[sSk8RrbOiii]

that thing is like almost vert haha . . scary

[SmokinGunVids]

@sSk8RrbOiii yeah man it is pretty steep but its skatable, JUST THOUGHT ID LET EVERYONE KNOW, IM MAKING ANOTHER VIDEO OF ANOTHER RAMP VERY SOON, MORE SKATABLE ONE :D, hopfuly with more posotive comments :P

[jy8times]

what did u use for comping?

[skaterdude734]

metal  piece

[SmokinGunVids]

@skaterdude734 what the coping??

[SlotGlassesGuy]

@SmokinGunVids i think he means the song :)

[SmokinGunVids]

@SlotGlassesGuy this song aint Metal :)



[memattallica]

@SmokinGunVids no he means the metal piece on the quarter pipe

[SmokinGunVids]

awesome, good to hear man :)

[SuperSmahon]

very helpful

[SmokinGunVids]

well i dont think its smart to comment if you dont have a clue what the fuck your on about because it works fine,

[SmokinGunVids]

say whatever you want mate its a good ramp, so if you think it looks shit, dont build it, im not making you

[eddted7]

the angle on that thing is shit

[sarwinsarwin]

how much did it cost trying to find a project for me and ma dad

[sk8erdude0412]

a better way to do the ply going down the ramp is to get a bucket of water and a cloth then stand in the ply on the ramp get the cloth wet and rub the wet cloth on the ply. Then screw two screws into the first 2x4 then keep gion up still standing in the ply

[baller958]

Awesome , Very helpfull! would it be possible for you to come up with some smaller measer mesnts . thank you very much ! (subscibed ) :)

[KyroKaTaK]

You Want To put A X At Back As Well To Increase Integrity. But It Still Works Without.

[KyroKaTaK]

Im making A Flat Bank And Im Gonna use Your Design For The Quater Pipe On it!

Then Pritty Much The Same For The BANK. TY!

[S0lrik]

That thing is rubbish, no offence.

[SmokinGunVids]

@S0lrik Well it's your opinion man, but its lasted us pretty well and does the job, so if you don't like it then watch another video.

[butface4589]

You don't have to bend the ply wood with rope just get it wet wen your outing it on

[SmokinGunVids]

@butface4589 Well it will be too much pressure all in one go and the ply would snap, seriously stop questioning, my dad has built a skatepark before (Rampage I) he knows what hes doing.

[ARCRAMPS]

iam building and selling ramps locally!

[sk8erbush1]

gonna do it

[SmokinGunVids]

@sk8erbush1 awesome man good luck and have fun

[Grukmuck]

I dont mean to be a dick, but that ramp is weak. Dont use 2x2s use 2x4s. and make it wider than 3". Plus that transition is steep as hell. If anyone who watches this wants to build a ramp, don't go the cheap route, look at real blueprints for building one and save some money and do it right and your ramp will last a lifetime.

Like i said, i don't mean to be a dick. just giving my opinion. If you have any actual footage of someone skating this thing i would like to see it. No offense, really.

[SmokinGunVids]

@Grukmuck It isn't that weak, lasted a long time and the guy who made all this has made ramps for skate parks before. We can try and get some footage of it being skated up soon :)

[Grukmuck]

@SmokinGunVids Thanks for not taking offense to that message. Let me know if you get that vid up.

[12TreaL11]

can this ramp be used as a ramp for inline skate?

[SmokinGunVids]

@12TreaL11 Yeh sure man, anything really, it would be a bit sketchy with a bmx coz the strength but inlines... i dont see wh not

[12TreaL11]

@SmokinGunVids how much did you spend to everything in US.dollars?

[fatgolfer29]

i'm so glad that my dad has tons of ply wood..... Ive gotta build that

[SpectroRugratz]

how much is all this?

[SmokinGunVids]

@SpectroRugratz erm all the wood cost about £40

[WeeeWeeeification]

This is finally one that's not got like 50 panels and is the cheapest out there awesome mate :D

[killerkain08lego]

cool thanks



[Mrlions091]

Awesome video, Very helpful im gonna have a go :D

[SmokinGunVids]

@Mrlions091 Awesome man, glad it helped, enjoy :)

[ToxicLegend1]

this would be awesome for an ATB ramp, thanx man 4 teh advice

[SmokinGunVids]

@ToxicLegend1 no problem mate

[fakeras123]

0:35 that's not really necessary

[SmokinGunVids]

@fakeras123 well be my guest mate, go and wack it strait on the ramp, have fun skating splinters, it will just snap strait in half, belive me i learned from my mistakes

[fakeras123]

@SmokinGunVids no actually in my town we have bmx park and i remember when few times i help them 1-2 guys sit on the wood and press it and the other one just put nails on it, i don't make so many ramps for have experience and speak about it just tell you my opinion but your video is still useful

[SmokinGunVids]

@fakeras123 well if you do how we did it on the video i will garentee it well last at least twice as long man, seriously i dont mind how you do it i just trying to help people all i can

[SuperRugbyboy123]

dont call me a dipshit george inoo what school you go to ;)

[jamiemow33]

looks too steep

[SuperRugbyboy123]

no george just ur dad

[SmokinGunVids]

@SuperRugbyboy123 no obviously u cant see me doing it with him is because im taking the fucking picture dipshit

[SYTECGamerxC]

can you use this too for a slide? like a ramp for a slide?

[SuperRugbyboy123]

your dad made this

[SmokinGunVids]

@SuperRugbyboy123 yeah me and my dad

[superD1cp]

sweet vid!

u shud have more views!!!

[SmokinGunVids]

@superD1cp thanks mate, its our video with the most views lol, you should try making one dude, do you skate??

[superD1cp]

@SmokinGunVids

lol,made one yesterday,im going to take up scootering so ya will soon.

thx for the feed back man!

[Airborne510]

thanks dude, this helped

[SmokinGunVids]

@Airborne510 no problem dude, good too here

[SmokinGunVids]

kool man how is it??

[thehelpkid123]

i found some ply wood and 2 by 4s and i made a kicker

[thehelpkid123]

wood is so much fucking money

[SmokinGunVids]

@thehelpkid123 yeah man i know, luckily my dads a carpinter so he got sum left over shit from his work so i only had to buy like haf of mine, if uhave any work done on ya house or saink just nik some left overs, shoodent need too much

[SmokinGunVids]

cheers mate

[PossyPossien]

well done !

[SmokinGunVids]

lol man good idea, can be used for alot of stuff

[T1MBO95]

I'm gonna make one and use it as a radio controlled car on it

[SmokinGunVids]

sweet man, and yes skating is amazing

[thejacobsj]

i might try it out i love to skate

[SmokinGunVids]

fort that would be pretty obvious

[SmokinGunVids]

well mat, we made the curve by putting and pencil on a string and pinning the string to the ramp nd it makes a good curve, just made the bottom reeeli slim, and its a peice of old scaffold pole, ;), and il ask him

[matbroomfield]

Some questions - how did you work out the curve angle, what is the metal rim and how did you attach it, and did you smooth off the bottom lip so you can ride up it too?

Oh, and is your dad available to make mine? ;-)

[matbroomfield]

Great vid - now to get dad building a half pipe with a 12 foot vert! ;-)

BTW, it needed a much longer intro and credits at the end lol ;-)

[SmokinGunVids]

it aint hard man i can do shit on it including drop in

[chapmandkc]

Dude that ramp is step it's gonna be hard to do tricks on it but still cool I would skate it ha

[GasinGentleman]

Get free Skateboards,Clothes,and gear at

element.searchpluswin(dot)com/­refer/TerryisBeast

nice vid