what primary gear is taller? 17/40 or 13/44 i want the most topend. im light so no worry about low end. primary is the one that goes right to the rim right?
it still got the stock 13/48 primary gear mated to to a 14/34 secondary gear.
to get the final gear ratio you divide the driven gear (the one with a lot of teeth) with the drive gear (the one with less teeth) on both the primary & secondary gears then after you get the ratios on both gears you multiply them & you get the final gear ratio.
yea im sure there are some great tuners here, but that guy is totally not a tuner lol.
dont know where he tuned it, maybe a professional tuning company, he hasnt told me yet.
last time i asked him about his exhaust, he said it was a Racing exhaust. he didnt know what brand or anything >.> thats what i want to know. i think hes talking crap lol.
you surely can reach 120 with 50cc tuned, but i just dont think he did it.
yes it can do power wheelies if you want, my rider has to keep his weight forward longer just to prevent it from lifting the front tire but even that it still manages to lift it by 2 inches.
i have tuned the clutch to give less bite so he can concentrate on the lights better.
no it isn't bullshit especially if you live in Holland, lots of great 2stroke scooter tuners there, i have a couple of Dutch tuners who guided me through the intricacies of 2stroke engines.
i can safely say my engines have a touch of Dutch tuning infused with our Filipino ingenuity.
i am proud to have known a few Dutch tuners that helped me along the way.
yes it is but still not good enough to become champion, we only managed to place 2nd, not bad for a first time, jojo is happy but in reality we're all disappointed.
next time we'll come out stronger, i have gathered enough data to assess how strong our rival is & i will make the necessary adjustments to the engine.
stay tuned for the videos & the 90cc class didn't go very for 2 participants & there were lots of accidents.
what primary gear is taller? 17/40 or 13/44 i want the most topend. im light so no worry about low end. primary is the one that goes right to the rim right?
slipin808 2 years ago
wat gear ratio? 10 to 1 or somethin? how do you calcuate it from the amount of teeth?
slipin808 2 years ago
it's 8,9:1 gear ratio we are using.
it still got the stock 13/48 primary gear mated to to a 14/34 secondary gear.
to get the final gear ratio you divide the driven gear (the one with a lot of teeth) with the drive gear (the one with less teeth) on both the primary & secondary gears then after you get the ratios on both gears you multiply them & you get the final gear ratio.
48 / 13 = 3.69230769 primary gear ratio
34 / 14 = 2.42857143 secondary gear ratio
hope this helps.
2F4R 2 years ago
hehe oke. great.
yea im sure there are some great tuners here, but that guy is totally not a tuner lol.
dont know where he tuned it, maybe a professional tuning company, he hasnt told me yet.
last time i asked him about his exhaust, he said it was a Racing exhaust. he didnt know what brand or anything >.> thats what i want to know. i think hes talking crap lol.
you surely can reach 120 with 50cc tuned, but i just dont think he did it.
anyways great vids.
can u record some auto wheelies?
thanks
Jvdx 3 years ago
hey.
i got a question.
so it goes around 80mph, thats like 125 km/h?
:)
ok anyways, does it make real auto wheelies?
like 10cm or more into the air when sitting up straight , open full gas ?
thanks.
Jvdx 3 years ago
yes it can do power wheelies if you want, my rider has to keep his weight forward longer just to prevent it from lifting the front tire but even that it still manages to lift it by 2 inches.
i have tuned the clutch to give less bite so he can concentrate on the lights better.
2F4R 3 years ago
ok thanks.
my friend says his brother had a 50cc tuned, and it went 120km/h + powerwheelies.
looks like bullshit to me, but if yours can, maybe his can 2 ;)
thanks.
Jvdx 3 years ago
no it isn't bullshit especially if you live in Holland, lots of great 2stroke scooter tuners there, i have a couple of Dutch tuners who guided me through the intricacies of 2stroke engines.
i can safely say my engines have a touch of Dutch tuning infused with our Filipino ingenuity.
i am proud to have known a few Dutch tuners that helped me along the way.
hope to hear from you again mijn vriend.
bedankt for the comments & ratings.
2F4R 3 years ago
Shit how fast were you going?
RP4409 3 years ago
my estimates would be 80mph, not bad for a 50cc scooter huh? :D
btw i'm a long time subscriber, Ron Paul all the way!
2F4R 3 years ago
Thats pretty good top end for 50cc Tiba
trueOverrev 3 years ago
yes it is but still not good enough to become champion, we only managed to place 2nd, not bad for a first time, jojo is happy but in reality we're all disappointed.
next time we'll come out stronger, i have gathered enough data to assess how strong our rival is & i will make the necessary adjustments to the engine.
stay tuned for the videos & the 90cc class didn't go very for 2 participants & there were lots of accidents.
i'll explain later.
2F4R 3 years ago