Excellent Airsoft Claymore trip mine

[iamwildmanmcnally]

this is sick

[TheMitchbuster]

make a tut oruil!

[thehotmailfreak]

how do you make the trigger?

[Spartonico]

Send me som plans ha ha

[KIZBY4]

TUTORIAL!!!!!!!!!!

[airsofthommie]

yo dude i have watched every airsoft bb claymore video none of them show you how to do the trip wire i have one made but i dont know how to trip mine it...yours looked like the beast one out of like the 130 i seen could you should me how you do it thanks airsofthommie

[jgarth12]

thts sick as shit, can u make a tutorial on it,plse thts the best one ive seen so far,tht shits sick

[IxSPAWNxKILL]

What are the dimensions of this claymore? I want to make one.

[danieljoses]

i whod make the string so it detaches when you trip the clay more so the chance of triping over is minmised meaning a guy in boots wood not feel the string and only feel the bbs it whod make it more efective

[thestalkerman123]

Plz tell me how u made the lever that holds the door wood thing

[HumanDynamite777]

Idoit: Pssh look guys a fake landmine, watch what happens when i step on nothin probably...

*Steps on mine* AWW SH*T BB'S ALL UP MY LEG!! DAMMIT IT HURTS!! GIVE ME AN ICE PACK NOW!! GET MY MOM, GET HER!!!

[Alexmajig]

How u make dat funky shit!I need something like tht

[Sirmellowman]

dude i bet that gets people everytime in a tourny.

[Sirmellowman]

dude. holy shit. that is rad! good job on that shit! best one ive ever seen.

[MultiFatcartman]

this is very cool, but the way people would walk or run would not detonate the claymore. you should try to raise the string a bit so when people walk/run, they would not step over the string

[guitarherorawks20]

@MultiFatcartman This was just a demonstration, but in a real game then yes you're right.

[AirsoftRealReviews]

oh ok...i was think about for a remote detonator some type of junk old rc vechile motor and the controller... but i really like the tripwire cause i snipe and sometimes i dont have someone 2 cover me, leaving my backside open.

[AirsoftRealReviews]

Very Nice! i'll be definetly using this design, but for the rod that opens it is that metal? and also did u just cut like a rivet in the rod to hold it?

[paperbagstudio]

I came up with boss trigger system if you dont know about wiring some electric remotes :D

Take a stake, wrap fishing string around it, tie it(tape) and then a metal pin to the other end and stick it to the claymore, then put the claymore down, have something second safety, put the steak down so the string is tight and then take the safety off the claymore and get kills =) Works

[dustardly2]

nice work.... seem open mechanism is very sensible. well done

[poisen99]

why is gatorade in the tags?

[zippoguy101]

Good craftsmanship and effective

[ThePopeAaron]

very nice work. 

[napkinz32]

thats awesome

[therussianredneck7]

i made something similer about two years ago i still have it i just couldent think of a very effective trigger syetem could you help

[random42777]

3:24 i swear i know that kid

[shortyjk95]

nice job man you showed it all

thumbs up that you showed how the mechanism works aka trip part =D

[agentkapser]

does it hurt ?

[drooprotc]

MORE DUCT TAPE!

[hellerZauberer]

A tutorial would be awesome!

[airsoftinvention]

great claymore i made one but im gunna make a better one

[antMANscochiey]

pretty awsome. a heck of alot better than most airsoft claymores.

[supperEisMan]

can you make a video tutorial???

I want to make the same claymore

[samike1997]

rat traps? sounds painful.

i likes

[snakes808]

nice work!;)

[TCTHEGOD]

WTF?!

[watchforthesniper]

Nice. But if you cant make a box for it all, I knw a really easy way. Take a rat trap and duck tape the killing part. Then put a airsoft container on the duck tape by either hot glueing or screwing it on. then screw one screw on each side of the killing part so it stops halfway. Feed fishing line through the cheese plate on the trap and tie half a cork to that end. then tie the other end to anything. fill lid with bbs. and when it goes off it stops halfway spraying bbs everywhere.

[tron72mon]

nice

[nate9801]

I love the ending FUNNY!!!!

[mj992995]

how many times did you make him trip the claymore?

[shootingguns101]

how do you prime the mouse traps?... and explain the locking mechanism please :)

[boddieizabeast]

wat do think i can use besides rat traps

[CowboywithaCamaro]

how hard was that to make?

[NYRECONMARINES]

Guitarherorawks20: Nice build brother.....can you email me the plans to make one. I maybe able to add a wireless remote to deploy it.

[DaBellyRoll]

Could you explain a little more on the locking mechanism that's attached to the tripwire, I was thinking on creating one of these, and I think I have everything set, i'm just unsure about how to build that locking/latch mechanism.

[MrVO313]

How much power does it produce (like: does it hurt you when you are hit from about 5 meters away) ?

[MrDarkes678]

do u mine makin a better vid on explainin the trigger mechanism

[ZamaSoldier]

hey i am makin it the exact way u made it. do you know the fps on it.

[501joshb]

hey instead of using string that you paint, just use fishing line, its stronger and almost invisible in a woodland type area

[HatOfRandomness]

willit go of if u step on it?

[SylvesterStilOWN]

wow that thing works great, nice vid

[blowme899]

finally someone whos not too pussy to use there airsoft mine on themselves.

[darknessninja02]

can u make a tutorial

[lilpomes]

wat r the dimensions?

[guitarherorawks20]

I'm not sure, I don't have my measurements handy. Mostly i just tried to work around the rat traps to achieve the smallest platform i could.

[kjun13]

I wanna see an airsoft claymore that uses an explosive not springs, like what they did in jackass 2.

[btripclip]

good vid. I have seen some real pieces of shit on here and yours looks better and seems to work great.

[MurderousPandas]

You should spray paint the string. I use dark forest green even though my area has lighter grass color. I said wtf to myself when i found that out.

[Madloki420]

Slick vid.

Better Claymore!

[SuperAirsoftman123]

Did it Sting or really sting?

[indian199218]

How do you make the trigure mech what did you use

[schniedelidi1]

DONT take an old lunchbox...it doesnt work^^

[franklinairsoft]

where do u get the box

[steelersrock444]

i love it thnaks for showing it on youtube and you should try to make4 a pvc booby trap search it they ARE awsome i made 2 of them. you should make a mortor and make vid of it

[2profiterol]

graet!...now want make one

[KungRRden1]

Awsome!!!! I like turtles

[some1green]

cool. im making a motion sensored one. its going to be wicked!!!!

[guitarherorawks20]

Awesome man! when you finish tell me! i would like to see, i could do a lazer trip and i might

[GuyaneseKid95]

@some1green i hope you make a video on it

[GuyaneseKid95]

That is awesome. Its funny how u kept walking trough it

[elliotmotoX]

weak as, that's like 10fps

[guitarherorawks20]

The camera makes it appear that way.

but it does leave a nasty mark.

[elliotmotoX]

come on as if thats 230fps

[guitarherorawks20]

All you need is too feel it, and you do . you know when your hit.

[elliotmotoX]

use a few grams of flash powder and "excellent" is spelled wrong

[ExCreation17]

....thats beautiful.

is it easy to set up? or do you actually have to set the rat traps? =/

[guitarherorawks20]

Thanks . You do have to set the traps, but it's easy.

[HeatSroken777]

5 stars that kicks ass but it didnt seem to to much damage u should use a controlled amount of gun powder

[guitarherorawks20]

The bb's are flying around in the 230 fps range, that's what you want, just something to feel it and know your out.

[guitarherorawks20]

it's aluminum, angle aluminum cut to size then sharpened

[21sanooj]

what you use as the "legs"

[21sanooj]

cool