AirsoftPRESS HD Tech Video: V3 Gearbox Upgrade using parts from DEEPFIRE

[haronasi]

awesome looking parts and the video was really helpful, only flaw I saw was while the shimming, aren't you supposed to tighten atleast the lower proportion screws to clear the tolerances and get them properly shimmed?

[VRaulV]

You are god!

[TopaXis]

This video made me bought DEEPFIRE Full Tune-Up kit :D

[sartorelg]

Video di estrema qualità, utilissimo. manca lo smontaggio della parte elettrica ma davvero ottimo!

Very high quality video! there's not the electric dismantle part but very good indeed!

[GreenArmyAirSsoft]

Diggin the tunes you used. Very well done vid.

[Mylllusions]

Your nails are extremely long for a male human. You should get those cut you look like you want to be a ninja and cut people with them when u get a real job.

[vidsources]

@Mylllusions

this is Chris from DEEPFIRE, he is the expert of this company

[sosoishero]

@vidsources The best part is your reply doesn't even match the question XD.

[andromedarr]

@Mylllusions The fingernails are used to grab shims laying on the ground or something similar. I find long fingernails to be uncomfortable and use knifes for picking up parts or just wet my finger for picking up shims, but everyone the way he prefers :)

[grunticus09]

@Mylllusions Airsoft Tech is a REAl job and their are now schools for it as well. The demand for Techs for the Airsoft Community is in high demand; especially in New England. So don't open your mouth until you know wtf your talking about. ;)

[APCPscorp]

@Mylllusions You are no less put in your place today than 1 year ago.

[halotango3]

Song?

[BorderPatrolMan7]

would this kit work in an AGM m16

[hongkongstory]

m16 is V2 , hard to say

[skateboardvidviewer]

how much money does that kit cost

and where is the motor located?

[vidsources]

go to airsoftpress + com

select 2010 new titles



look for the proper mechbox guide

[hongkongstory]

kit cost - check out deepfire's web site for pricing.

motor always at the pistol grip

[animator995]

@skateboardvidviewer the motor is located in the pistol grip :)

[skateboardvidviewer]

@animator995

haha yeah i figured out long ago, thanks

[animator995]

@skateboardvidviewer i didnt read the other comments sorry :/

[animator995]

Wich motors are better? the src motors or the JG motors?

[airsoftpress]

@animator995 no idea ... their motors are OEM anyway

[Athorain]

hey, is a tight bore cylinder head and cylinder worth it, or should I just get a regular set?

[daredevilisawsome]

i have a m110 high torque motor would the m120 spring be fine with this motor

[vidsources]

depends on the brand of the motor

[daredevilisawsome]

its a jg

[vidsources]

the JG motor will have a tough time pulling the spring, unless u push it with very high voltage

[randumstuffz127]

@vidsources what about an echo 1 motor

[airsoftpress]

@randumstuffz127 echo 1 motor is just a made in china eg700 clone

[tuchicilina]

hi, what is the name of the set please

[vidsources]

Deepfire FTK (full tune up kit)

[tuchicilina]

and much is the difference on fps and bbps?

[mongkk]

please specify your question?

[tuchicilina]

i mean how much it will increase the bb speed and the rate of shooting

[vidsources]

Generally speaking, air seal can improve FPS by upto 25%

ROF increase relies more on motor and battery power

[tuchicilina]

ok thanx.

[RatchetandClankNXTG3]

Hello, and nice vid. I was wondering what kind of FPS would I expect with the whole kit. FPS from stock would be greatly appreciated and I am about to buy a TM G36C so that info would be very helpful since I need at most 400fps on .20 BBs.

[vidsources]

with proper air seal I think a M110 spring can get you 400 fps

[RatchetandClankNXTG3]

I need it to not ever go beyond 400fps due to regulations but if it does then what do I do? But its for only one airsoft field so it doesn't matter. Also, on a TM MP5K, would I need a M100 then? I'm seeing one that is an enlarged set, butI have no idea what that means. It says that I have to use the original cylinder though.

[vidsources]

as long as u have proper air seal, stock TM MP5K with a M100 spring, no need to use enlarged cylinder, can get you to 380fps or so.

suugest to use an air seal nozzle.

[RatchetandClankNXTG3]

Alright then thanks!

[volcompro180]

you should make one that has a little more of a description next time great video though 5*s

[vidsources]

will try when time is available