@85IrocZcamaro No Boost, NA....this run bone stock with plugged up exhaust. Done a lot of work since this run: cam, heads, shorty headers, throttle body, exhaust, maf to map ecu conversion and my own tune. Need to re dyno this spring to see where power sits now.
@MrBigg626 Thanks...that pull was with factor exhaust which i now gone (rusted out internally and plugged up the muffler pretty bad). It has a 3" exhaust, with shorty headers, high flow cat and a magnaflow muffler on it now...sounds even better now...I need to set up a dyno slot and redyno it now that I've finally got the tune dialed in on it.
@z28alltheway Cool, i'm hoping i've clipped 300 now that the motor is done: I've got the cam and trickflow heads on, ported out the tpi plenum and high flow runners, shorty headers, high flow cat and 3" exhaust feeding into a magnaflow now. I've done my own tuning and the fuel curve and timing really confirms what I feel now...good strong pulls all the way to 6 grand now. Now i've got to get it back on the dyno again and post and update.
@myersprostatus lol, my lock kit consisted of a paper clip in the aldl port ;). But seriously, only things not stock to this car at the time of this run was a hotter Accel in cap hei coil, K&N drop in air filters, and battery. I'm looking forward to re-dynoing the car here shortly now that spring is almost here and the motor work is done.
@iridium130m some bolt ons would really open her up. You have the LB9 305 correct? I know the LG4 wouldnt put out that much power stock. Bolt ons+Reworked cylinder heads+A mild cam and youll have one quick ass little maro. Good luck with your car, shes a beaut!
@philly2compton89 Will do...so far only thing done is 85 ecu is gone and a 90 is in its place with a minor tune on it. As soon as it cools of here, we'll tear into the motor: heads, cam, injectors, runners. We'll see how it does!
@iridium130m nice pull for stock. check mine out, i have exhaust, heads, cam, intake on mine... no dyno pulls yet but there an exhaust vid, and a run against an 04 mustang gt
Did you have to build the bottom end for the boost? How much you pushing?
85IrocZcamaro 2 months ago
How much custom work for the turbo? And how much boost did you run? My 85 z28 with the LB9 put down 204.4rwhp and 295rwtq
85IrocZcamaro 2 months ago
@85IrocZcamaro No Boost, NA....this run bone stock with plugged up exhaust. Done a lot of work since this run: cam, heads, shorty headers, throttle body, exhaust, maf to map ecu conversion and my own tune. Need to re dyno this spring to see where power sits now.
iridium130m 2 months ago
Sounds real good.
MrBigg626 7 months ago
@MrBigg626 Thanks...that pull was with factor exhaust which i now gone (rusted out internally and plugged up the muffler pretty bad). It has a 3" exhaust, with shorty headers, high flow cat and a magnaflow muffler on it now...sounds even better now...I need to set up a dyno slot and redyno it now that I've finally got the tune dialed in on it.
iridium130m 6 months ago
hi im a breakdancer from 1984
is this a goood automobile for me
strigi1986 10 months ago
@strigi1986 only if you have a mullet
iridium130m 9 months ago
I have an 85 camaro 305 tpi with a bigger cam and a chip and it puts out 280 HP
z28alltheway 10 months ago
@z28alltheway Cool, i'm hoping i've clipped 300 now that the motor is done: I've got the cam and trickflow heads on, ported out the tpi plenum and high flow runners, shorty headers, high flow cat and 3" exhaust feeding into a magnaflow now. I've done my own tuning and the fuel curve and timing really confirms what I feel now...good strong pulls all the way to 6 grand now. Now i've got to get it back on the dyno again and post and update.
iridium130m 9 months ago
damn 210 rwhp and 260 rwtq for a 305? pretty good, are there any mods done to it, besides the lock up kit?
myersprostatus 1 year ago
@myersprostatus lol, my lock kit consisted of a paper clip in the aldl port ;). But seriously, only things not stock to this car at the time of this run was a hotter Accel in cap hei coil, K&N drop in air filters, and battery. I'm looking forward to re-dynoing the car here shortly now that spring is almost here and the motor work is done.
iridium130m 1 year ago
@iridium130m some bolt ons would really open her up. You have the LB9 305 correct? I know the LG4 wouldnt put out that much power stock. Bolt ons+Reworked cylinder heads+A mild cam and youll have one quick ass little maro. Good luck with your car, shes a beaut!
myersprostatus 1 year ago
that was good run for stock, nice if you get mods i wanna see the dyno
philly2compton89 1 year ago
@philly2compton89 Will do...so far only thing done is 85 ecu is gone and a 90 is in its place with a minor tune on it. As soon as it cools of here, we'll tear into the motor: heads, cam, injectors, runners. We'll see how it does!
iridium130m 1 year ago
@iridium130m nice pull for stock. check mine out, i have exhaust, heads, cam, intake on mine... no dyno pulls yet but there an exhaust vid, and a run against an 04 mustang gt
Nater36 1 year ago
ah thanks - Ive got some dyno racing and hp pulls on my youtube page.... check them out.
I actually like these 3rd generation camaros. I want to get one for a summer cruiser. I like the idea of having a carb but TPI has more power
mustang633NY 1 year ago
well - what did you pull? HP and torque??
mustang633NY 1 year ago
@mustang633NY sry, forgot to post: 210rwhp, 260 rwtq on final run with torque converter locked for entire run.
iridium130m 1 year ago