118 plate MASSIVE hydrogen generator build part1

[ymdeardorff1]

Probably the main reason the mythbusters misrepresented this as a non working device. Creating Browns gas in an enclosed area can be dangerous. Without proper safety and knowledge of what your doing, bad things can happen faster than you can realize.

[LightWthoutTheStatic]

How much hydrogen does that thing eat per minute? It's gotta be a monster hydrogen guzzler.

[delvis11]

@LightWthoutTheStatic It's not a fuel cell. It produces hydrogen

[Johndoe2point0]

such and such in no way advocates the use of this product in your engine.... and is not responsible for injury or death of damaged property from the misuse or failure of this device.

[ymdeardorff1]

ppl that say the energy used outweighs the benefit of these unit are just spreading ignorance. You don't hear people complaining about there after-market car stereo, or custom fog lights making their gas mileage go down do you? nope. These units draw the same power. If you dont believe this, then keep paying too much at the pump. to deny that the gas companies, and our federal govt are robbing us blind, is the true ignorance of the situation.

[ymdeardorff1]

Ive built a hyd generator myself and they work just fine. Easy you wanna check for your self? grab some arm and hammer baking soda, a bowl, two spoons, jumper cables and a car battery.

mix water and baking soda in the bowl. Connect the battery to the jumper cables, now put a spoon in each end of the cables on the other end. Put them in the water, and watch the bubbles flow.

[Johndoe2point0]

i would make people sign a standard legal form

[DaRocknessMonster2]

HHO is stored using a material which is found in Nuclear Weapons; you can't buy it BUT you can manufacturer it. :D Have fun - build a partical accelerator and make all the material you need to store HHO. The law is stupid because it does not disallow that action. So, it's mute and pointless.

[delvis11]

@DaRocknessMonster2 Hydrogen can be stored in hydride. DON'T EVER COMPRESS HHO unless you want to kill yourself or your neighbors.

[DjViOd]

@delvis11 What exactly does happen when you compress it?

[delvis11]

@DjViOd It can become unstable and explode. Some guys in California were killed doing it.

[wingspanman]

How long does that cell last? Does it corrode?

[YeOldClipper]

yea! more!

[YeOldClipper]

when you get your big generator rolling, you may want to use phosphoric acid in the solution with iron plates for more hydrolysis at higher speeds, very high speeds, ultra high speeds, etc.

[YeOldClipper]

positive piston and negative engine block, insulated. Pop the fuel at the point of contact using the stroke for generating the static a little bit, too. The faster the more...

[taztaz79]

"Plugged into a 8000watts generator that will be able to deliver 70000!!! watts .." LOL are you for real.. Thats is a real compact POWERPLANT you have there... 70kW of output power... LOL ... as much LOL as you think you can get lower gas milage of putting a electrolyser into a car...

[delvis11]

@taztaz79 no one said 70000 watts. if I misspoke it is real easy to understand what i was talking about. keep saying you cant. You wont.

[TheSanwiches]

@taztaz79 He said "7 to 8 thousand"

[janismac314]

i wonder how you store HHO...

if you just put it in a box, thats no fuel, thats a BOMB!

fossil fuels burns slowly, but HHO explodes if ignited, doesn't it?

so how to cope with that?

[delvis11]

@janismac314 You dont "cope" with it. Under no circumstances can HHO EVER be COMPRESSED unless you want to kill yourself or your neighbours! You are vary right, it is a bomb and can explode on its own.

[StreamingJaden]

This device can take electricity from wind, or solar, or microhydro from your local stream if you have one, and convert it to browns gas; you can then store that gas, and use it at night, or in the deep of winter when the sun is scarce, please dump your old text books and get practical, petroleum is not the only fuel, humanity lived without it for a long time, and did very well. THINK first, then respond. Thanks

[tarotbug]

I'm in the UK if one wanted to make or get such a device would be a joke it would be a minimum order plus tooling costs ect. If i get one from the US that's not going to be cheep and TAX, import TAX ect another joke lol, any one in the UK got any bits for one ?????????????????

[delvis11]

@tarotbug I have shipped to the UK a lot. Is there something I can help with?

[BCQD4]

HEY im new to this but could someone please explain to me the neutral plate thing?????

cheers

[Rich52269]

I don't think you saw, but you had a spark jump 7 sec. in the vid!

[lilklongie4]

so this is cool. it prolly only weighes 80 lbs.

[JustinJaybrown]

haha the nerd debater program next they are going to call each other newbs.

[wileycoyoteengineer]

Ok here is my problem with what you have done. you are making hydrogen and oxygen and you allow them to combine. To make hydrogen to use as a fuel hydrogen should be collected and stored separately until it is burned in an engine.

[PrestoWind]

This is pointless. You are merely converting electricity into hho. No energy is being created. Wake up people. It's called the 1st law of T.D. Cool experiment though.

[delvis11]

@PrestoWind For advanced minds only. You wouldn't understand. It is simple an experiment of what can be done and has nothing to do with thermodynamics. HHO has many uses, go read about them and then come back and make an intelligent post.

[PrestoWind]

@delvis11 You are no doubt a gifted inventor. I meant nothing sarcastic to you, sorry. We need more people like you trying to improve our planet.

[tonyjover]

@delvis11 Yes, there are lots of uses for HHO - and all of them respect the 1st LAW (note that it's not a theory, it is a LAW) of Thermodynamics. You use energy to break the Hydrogen-Oxygen bond, and the energy now available in the released gasses is less than the energy used to create them. I wouldn't expect a believer in snake oil such as yourself to understand that though.

[delvis11]

@tonyjover There is always a loss of efficiency when energy is converted. I am a believer of what I can prove and third party validation. Your post has no point.

[PrestoWind]

@PrestoWind I said it was a cool experiment...man!

[illumined1]

@PrestoWind I agree, but consider personal generators using mechanical energy and effort. potentially a long term way to store energy. I agree though it isn't free energy, actually requires more to put in than getting out, even before mechanical efficiency.

[jsmythib]

@PrestoWind I was actually trying to find a way to produce enough oxyhydrogen to run a small cutting torch- Nothings free- except printed money :) Peace!

[willz100]

@PrestoWind hmm he could use wind turbine or solar panel to generate his power free enough for me

[BlackGoldEstates]

@PrestoWind yes then you burn the hydrogen and oxygen in the engine of a car which makes it run and then the alternator produces the electricity to creat the hydrogen, the point you are clearly missing is that water is free and you can use as much as you like

[eorgeburns8]

so how likely is this to blow up?

[YeOldClipper]

Dealing with the enlarged state of recombinant compounds as if it was one single process, is like using a video instead of a photograph. RECOMBINANT WATER IS HHO to H2O to HHO to H2O around and around and around.... un-ending loop. To recreate this un-ending loop in order to release heat energy is what I like. Seperate and combine, over and over, recombinant water.

[YeOldClipper]

Capturing anode and cathode gases would eliminate the need for flashback inhibitors by using the hydrogen and oxygen discretely. Two spouts, releasing the hydrogen and using only the oxygen.

[delvis11]

@YeOldClipper A separator cell is what a friend and I have been working on for almost a year. They are much more complicated and the material can get exotic. I hope to have something that is a 99+% separation by the end of the year. There are units on the market but I want be be able to get the price much lower so everyone has a chance to buy them.

[BlackGoldEstates]

@YeOldClipper but we wwant both in to the engine

[HostileHST]

How long can a person expect the stainless steel to last? I already can see them saying, we no longer have enough stainless steel to keep making and replacing cells, no different than oil. I know they could recycle stainless, but still a valid point.

[delvis11]

@HostileHST I have not experienced any longevity issues at this point.

[300zxz32]

so do you install it with a forklift or what. it must be heavier than a bucket of gary busey's teeth.

[nightstash1]

Delvis that generator is big pimping bro. 120 V, 8000 W , (8000 = I * 120)= 66.66A!!! I wouldn't want touch my dick across positive and negative on that thing!!!

[Vaderghost20]

lpm please



[Itsmeeman1]

Did the video end right when you shocked yourself? lol

[HHOpower13]

Hi, kinda new to all of this. I checked out your website delvis and couldnt find the answers for a few things. I was wondering if anyone knows if the O2 sensor would have to be modified for efficiency? Is there a risk of sending too much HHO through the intake at one time?

[PatrickONB]

My LORD! that has got to be expensive to build that thing! Stainless ain't for boys, only full grown men need apply. he he

[Lowracerman]

Where is the hydrogen gas? I see NO gas???

[myleftnutts]

@Lowracerman u smell it,before u ever see it!!!.

[charadester]

I have one question that I hope someone can answer. Why is it that the hydrogen generated in this electrolysis of water produces more available energy than if you were to just use the electricity to power the vehicle directly? It doesn't seem to gel with the second law of thermodynamics. We're actually going through one more energy transformation step, none of which are 100% efficient, and yet there is more energy available. Can someone help me see where I'm thinking wrongly on this? Thanks.

[dellvostro00001]

@charadester

well let me clear you up on this ferst of all your not seing the point hear the point is to make a ready fuel for a cars moter not spend more money for moter and other electonics the point is to power the moter so you can get around with out paying the high price at the pump for fuel is that clear or did i miss something

[Dracoma88]

hey man ive got an old bus thats currently hooked up for propane, how much would whole 32 plate kit cost a guy?

[delvis11]

@Dracoma88 $499

Check out the website.

[dellvostro00001]

and whare do you mount it

[dellvostro00001]

ok this all steel construccion of your the big big one will it power a scool bus

[guevodeplomo]

what does it weigh ??

[skatergirlcat1214]

I'm just curious what would happen if you took the 32 plate cell meant for the v8 cars and put it in place for a v6 car?

[delvis11]

@skatergirlcat1214 It will just draw more amps. Your alternator may not be able to handle it.

[mnmeyers83]

Steve, I am going to be creating a hybrid energy generator burning HHO, and I would like to use a cell this size to get started. Do you have plans available to build this from scratch?

[mnmeyers83]

Steve,  I am going to be creating a hybrid energy generator burning HHO, and I would like to use a cell this size to get started. Do you have plans available to build this from scratch?

[delvis11]

@mnmeyers83 no but if you view all my videos on this cell it will be revealed to you

[tooaxeeffected]

you pointed to the wrong corner...

[YieSing]

hey erm, quick question.. how long can you store the HHO until they recombines and become water again?

[sharkster668]

Ive got mine together. Before i set this thing up on my truck anything special i need to know about? Curious if this will ruin the cats or O2's. Do i need to remove them? Do i need to adjust my spark on the spark plugs or use a special plug. I dont want to push too much into my intake and blow the top of my engine off

[sharkster668]

How can you separate the hydrogen and oxygen? Ive seen most setups running straight hydrogen but they never say how they are separating the 2 gases in the generator.

[9761scott]

@sharkster668 , G'day man, I just answered that one a minute ago, go back to this page and find my other comment, it was to nicuribe.

It seems a lot of people will tell you shit , seemingly so they dont have to say 'I dont know'.

It's a pity, its easy to say, nobody knows everything, but they'd rather inform people incorrectly.

The basics are in my other post.

Good luck.

[sharkster668]

When you say a neutral plate is that just a dead plate with no power or negative running to it?

[nicuribe]

Thanks, delvis11. You say that HHO gas is just as buoyant as pure H2???? I'm no chemist, but I see it this way: 2 molecules of water yield 2 molecules of H2 and one molecule of O2. Hence, the resulting gas mix is two thirds H2 and one third 02. The density of O2 is close to that of plain air. So it would seem that the 02 will bring down the buoyancy of the gas mix substantially. Or am I missing something?

[delvis11]

@nicuribe yes you are right. The o2 will take up some room in the balloon. All I know is my HHO balloons float and they fly away if I let them go. I am not sure how much lift HHO will create compared to pure H

[nicuribe]

Great video! Thanks a million. However, I don't want hydroxy gas for my car - I want pure hydrogen to fill my weather balloons. Therefore, I'll need to 1) separate the hydrogen from the oxygen and 2) have sufficient pressure to fill balloons. 20 or 30 psi ought to be enough. Can you help me???

[delvis11]

@nicuribe no one does it. There are devices that do it but they are expensive. my question is can you fill your balloons on demand or will you need to store the hydrogen in a bottle? If you can fill them on demand HHO will float your balloons just as good as hydrogen.

[9761scott]

@delvis11 , its easy to seperate....

[pcblah]

@delvis11 wait... cant o2 be heaver and you can take it off (while wasting alot of gas :P) by scraping it off? yea... pretty unrealisitc :P

[9761scott]

@nicuribe , I dont know about the rest but I can tell you about seperating the gases -

H only comes from + and O from - ( or is it the other way ? ).

So if you dont use a plate set-up, and you keep your electrodes reasonably seperate, and create 2 seperate gas cavities at the top of your tank (like a bottle with 2 seperate necks, and the water body filling it to just above the bottom of the necks) with an electrode in each neck, you can keep the gases seperate.

Hope this helps

Happy flying

[elroca12]

do you use purified water? because i was using water from my house and when i started up my generator the water turned to sludge

[delvis11]

@elroca12 always use distilled water in HHO generators.

[ATME479]

WTF?!?!/great;-)

[ChaosNuke666]

that is bad and warm rectifier

[sweetgyy]

what do u do if your generator is left out and freezes ?

[delvis11]

@sweetgyy The only thing that will prevent freezing is an 18+ % KOH electrolyte mix. The problem is that it becomes dangerous to use and will burn you easily. One drop in your eye could blind you.

[Me102288]

@sweetgyy hmm good question, my bet is plug it in, and it'll probably melt the ice pretty quick.. Free distilled water lol. I'm going to run a little weedeater engine with an 11 plate dry cell, the engine will turn a custom alternator @ 1200 rpm, giving me roughly 4 to 10 kilowatts.. the hho cell only takes around 100 to 140 watts, so I gunna be making free energy, no more electricity bills. :-)

[tcservices1]

did anyone else see what i saw at the start of the movie he has a large high voltage spark. i wonder if he can make it to colect magnetic static charges. then channel it to run pulse motors.

[serjant308]

GOOD !!! Молодец СПАСИБО за видео ! ( Украина )

[nicolaas39]

Hi Steve.

Did you try the Stanley Meyer generatior in combination with distilled water on your cells?

Best regards;

nico Hartman.

[delvis11]

@nicolaas39 no I never got into that. Left it for some of the other guys to play with.

[nicolaas39]

Hi Steve.

Did you try the Stanley Meyer generatior in combination with distilled water on your cells?

Best regards;

nico Hartman.

[industriasnahuat]

This and very interested in

information that can provide to me

information

on the cells producing of hydrogen

for gasoline fuel saving as much as for vehicles

diesel engine. I need the information to request the first units

as samples and if paices of America Center is feasibility to provide to be its exclusive distributor of You .

Agradedere member state sends to information member state prefanahuat@gmail.com

my nombe is Ing. Jose Robeto Jimenez Z.

[Me102288]

@industriasnahuat look up electrolysis, helps. Yes it works in diesel, you have to put spark plug in. I'm buying the 4 cylinder one :-)

[phantasm48]

"This bubbler's big for a reason" Heck yeah it is!

[sghouse]

which model is the good one to fix in a 7kv generator, with a leser amps

[3593893]

What do you have for a tractor trailer ??

[terrymccurter]

I would like to know your gas production from the 118 plate 9"x9" plates on 158 volts your video ended before you showed your gas production when i went to video 2 you were using 220 volts was it around 11 L per min. I thought your videos were very well done dont listen to that guy complaining . Big thumbs up to you. I saw where you set the bar way to go.

[delvis11]

@terrymccurter I don't remember. Sorry for that.

[terrymccurter]

Loved your video great cell. I have a little info that will be helpful. According to the scientists that developed the fuel cell used on the space shuttle 1.23 volts are necessary per cell to splitt water by electrolises. In your video you said while off you showed 9 volts in the off position this is due to the fact that your cell is producing electricity from hydrogen and oxygen touching your plates. It will act as a battery, capacitor , and electric generator all at the same time

[BasementBen]

@terrymccurter I agree, ionic charges with all the surface area like an ultracapacitor. :)

[lastkiss84]

what about 3x118 cell generator? will it be enough to run 3.5 engine?

[delvis11]

@lastkiss84 maybe. It will run a 2 liter engine

[wesramp]

is it possible to run a car completely off  hydrogen with a joker like that? no GAS?

[delvis11]

@wesramp no. this generator isn't big enough

[opt1k2600]

why did you even write a reply.

[phantasm48]

wow, that's almost 1700 SQUARE FEET of surface area!! Da a a aaammn!

[picturemantv]

your other videos improve a lot and are very informative. This is all great stuff. Thanks for sharing you work.

[kdkinen]

W O W man, bless you 4 doing this work

[sportrider60]

I think you have something good to share. It would be in your best interest, and your viewers, to communicate it better.

[delvis11]

oh really? what am I lacking to say.

Me putting these video's on youtube is communication. Remember I don't have to share at all.

[sportrider60]

Ok. Lets start with better production values. You cannot possibly do everything at once and expect even average results, have someone else do the camera work. Also, think about what you are going to say beforehand, even to the point of writing out some dialogue, you know, read from a script. Write a rough draft, and refine it, remember you are talking to people who do not know as much abolut this as you do. This is important information, respect the platform and use it effectively.

[hisveggieness]

@sportrider60 I have to agree. It's not what you say but how you say it. Good information but poorly delivered.

[fugartta]

hi can you do a test with mor amps like 20 or 30

tso you produce more

you can use a pwm to controlet

and i whant to know how do you buildit

thanks

[thegreatkoua]

you built that for big truck

[LungfishProject]

you should share the "secret" and share this with your friends. At least then one of them can hold the camera!

[RisingSun350]

Do you have output data yet? that thing is freakin huge!!!!!!!!

[EletrikRide]

I love your cell, man - nice job.  keep the volts low :-)

[viesturstube]

@EletrikRide  more volts is better,

[delvis11]

@viesturstube more volts are net better. You need to do more research before you post.

[insAneTunA]

2.6 Volt, ain't that just a bit to much? I thought it was better to have just less then 2.3 volt.

118 times 0.3 Volts is a lot.

Nice Cell by the way, it is looking great and I would love to see the production of that monster cell.

Greets from the Netherlands

[delvis11]

I want more of a brute force cell on this build. there isn't much of an efficiency difference. The plus is i don't have to use as much electrolyte to get the same amount of hho at a higher voltage.

[Me102288]

@insAneTunA if its "parallel" wired and one plate = 2.5 volts, the total voltage should remain 2.5 'ish volts across all the the plates, its amperage that goes up ,if its series wired you would add 1 plate = 3 volts, 2 plates = 6 volts, and the amperage would be split up among them. Its best like this, to throw a single conductor across all the plates instead of "daisy chaining" them.. think I gunna be switching from 12volts now too.. can only pull 15amp, I can get 30 with 5 volt. awesome gen

[HHO4ALL]

Wow, I'm jealous. I'd love to see that monster in a truck connected to a power inverter.

I can't even imagine how long that must have taken to assemble.

Glad to see you are making videos again.

[terra52pgss]

@HHO4ALL I would like to understand how to install the hho fuel into a 25 horespower boiler that now runs on natural gas. That would be a hugh market to explore, cause I got a few in operation needing this fuel system. These are in my Dry Cleaning plants, costing mega bucks to operate. HHO help. May email info to: terra@infowest.com after you share with all.