hey exo... i know this is a old video and all.. but whats your take on passive and active crossovers.. i have 3 amps.. 1 for bass 1 for my door speakers and 1 for my tweeters.. i dont use any passive crossovers but what the settings are on my amp.. should i get a passive crossover for the tweets or door speakers?
@Dorisequador - Not really sure that you mean by "deep cone tweets" - But the difference between dome tweets and cone tweets are that one is convex, and one is concave. Horn tweets use 2 diaphragms to vibrate air via impedance transformation.
@EXOcontralto hey exo, i just got some audiopipe crossovers for my 6x9s and some 4 inch, do u think its safe to run these 2 speakers to the same terminal for mid range on the crossover? thanks
@RedHotFlam3 It provides me with the humor i need to get on with my day. Thank you for your concern. Besides, for all you know i could be the creator of this comment therefore i am not perpetuating it as it is my intellectual property.
bostons are good speakers. I picked up a cheap set of lower level boston's a few months ago and they sounded good, until I put them on a 600.4. Lets just say they are toast lol.
@EXOcontralto yeah very sound quality oriented. I have to start experimenting more with new equipment since there are literally no memphis dealers out here in Hawaii and you can't buy it online. Kind of sucks, but I have taken a liking to kenwood and believe it or not phoenix gold has put out some real solid products after being bought out by AAMP.
exo i have a question, i was going to install tweeters that run of the door speakers but i dont know if i should use a cross over or a capacitor? thanks
Great video, but can you explain to a stereo-noob how "exactly" the wires connect to the speakers? Such as, are there different methods (solder, plugs, etc.) the speaker-wire connects to the audio-components? I'm planning on doing an install and I just need to know what to get for that since I am doing a complete re-wiring job and I have no idea how to attach wire to speakers. Thank you.
Great video, but can you explain to a stereo-noob how "exactly" the wires connect to the speakers? Such as, are there different methods (solder, plugs, etc.) the speaker-wire connects to the audio-components? I'm planning on doing an install and I just need to know what to get for that since I am doing a complete re-wiring job and I have no idea how to attach wire to speakers. Thank you.
@lastormtrooper If your doing a complete re wiring, might be better to get someone who knows what they're doing to give you a hand. All cross overs and amps usually have a grub screw style inlet/outlet so its just a matter of inserting the right wires and tightening the screws down. But it can a little confusing if you dont know what your doing.
@bballxp001 i thought i just should elaborate. Active means the tweeters are on a separate channel from the mids, and each channel has a different crossover setting to "filter" out what you dont want each speaker to play. The more channels needed for active often make it cost a decent amount more but you can mix match mids and tweets to suit your needs. Passive is what is in the video.Great vid exo, i remember watching this in my noob days trying to learn, you taught me a bunch.
@TheTechGuider limit what each component of the set receives which frequency range. You wouldnt send a 40hz tone through a tweeter would you? Usually the midwoofer output of the passive crossover doesnt let the midwoofer(6.5") play below i think 20hz or so so it plays mid frequencies up to 8000 hz or around that number. The Tweeter(usually 1" dome) output of the passive crossover filters out anything below 4000hz so the tweeter only plays high frequencies.
Everyone says that it is better getting a pair of components rather than rear 6x9s, do decent front component speakers still have the bass of a 6x9, without the need for a sub?
i watched this video when i first got started on my car audio and now that i know the difference between coaxial and component those sound pretty clean !!!!!!!
So can you wire crossovers with out having a amp? Friend is going to add a sound bar in his Jeep and he keeps reading up people saying you need a amp but I don't see why you could not just run the stock speaker wire to the crossover instead.
You need a window roller removal tool too, if you don't have power windows. Found that out yesterday and had to make a second trip to the parts store.
hey...i need help...i got a 2channel amp...and i want the sub to play bass...and the 6x9 to play mids and high..so how do i wire it ? thanks in advanced
@FromThe3PointLine they split the frequencies to the different drivers so that they can reproduce the sound more clearly, and mor fit to the designed function of the actual driver's range..
@FromThe3PointLine really? Crossovers let frequencies at a certain range play while cutting the rest out. For instance, you don't want tweeters to play anything lower than ~2khertz and the mid woofer to play anything higher than the same range. Sometimes they can be crossed to overlap but it really depends on installation. To put it in a nutshell Speakers of all sizes have a range of frequencies it is suited for. Crossovers help control that dynamic of the sound coming out of the speaker. Easy?
i have this car and i just could not take the door off so i had to use pliers and a dremel to take out the saftey grill and i had to work with the speaker through the bottom of the door. omg soooooo anoying
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks a lot!
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks a lot!
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
hey where can i get tweeter mounts just like the ones in this video? A friend of mine gave me 2 cerwin vega tweeters and I have a '98 chevy truck with the same door panels. My only problem is finding another way to mount them. Thanks
hey where can i get tweeter mounts just like the ones in this video? A friend of mine gave me 2 cerwin vega tweeters and I have a '98 chevy truck with the same door panels. My only problem is finding another way to mount them. Thanks
How do you install a crossover with 4 inputs? (tweeter +,- and Woofer +,-) do you use one output from the amp and split the + wire into two and put it into the tweeter and woofer + and like wise with the -? Thanks!
Man those Boston Pro 60's are the shit. I used them in my burban back in 04 and man do I miss them. I ran them off the stack-able Alpine 150wx4 and they screamed and the clarity was out of this world. But now I am running jl cs-650 6 1/2. I love Boston's sound quality better though. I know you gotta love them. You makin me wanna switch back to them...lol. Nice vid
I would have put the crossovers under the seat or somewhere more convenient. Also would have had the tweeters flush with the door. Over all good video.
@EXOcontralto yeah my car is kind of a sleeper to. I have a 2000 Mazda 626 and have a complete system and a viper 5901 alarm. Tinted windows is the only thing that isn't stock that is visible from the outside.
@KonnerKoonz Because when you have nice speakers you can enjoy that for yourself. Making the car look nice does nothing for you while you are in it :p
@KonnerKoonz when the car is wrecked/broke down or totaled the audio system can be removed and added to the next car, but you cant do that with a painjob/dent repair or whatever
I have an issue i wired my tweeters directly to my amplifier ,i am using an active crossover set up ,. only issue is at high volumes my tweeter is loud and plays with no distortion at all ,.. but the vocals sound low everything else sounds fine but the vocals ..i played with the head units equalizer and i have also adjusted the crossovers , changed out rca cables , used a cd instead of the ipod connection ,changed tweeters .. but to no avail i end up with the same results wtf am i doing wrong :(
this passive crossover things are new to me, ive been out the game for awhile but i got 4 way kicker 6x9 s in da back, should i put some passive crossovers on them?? trying to understand thanks
hey man i got a question... what if i got a car that has all this stuff but not wired up at all i dont have the crossover and dont have a stereo either but i got some pretty cool speakers and 2 tweeters that ima put on the back of the car. Would this be the same process or is it a little different?
im still lost. so do i run my crossovers into an amp or can i just attach the cross overs to the normal speaker cables. may sound like a stupid question but i dont know much about car audio :)
hey i have a quick question, i was gonna buy them pro series speakers, and i noticed that they were 3 ohms...will they be ok with my aftermarket head unit...its a pioneer avic z120 and i was thinking about getting a amp for all the mids and highs that will be pro series...is it better to get a 2ohm or 4 ohm amp?? thanks, great videos man!!!
That was cool Exo that part at the end made me go Awww cute little girl
psementalist 4 days ago
@psementalist - We like to teach em while they're young up here :)
EXOcontralto 4 days ago
@EXOcontralto Heck yea they are the BassHeads of the next generation and there is nothing wrong with that .
psementalist 3 days ago
@psementalist - I can see here now rollin' down the block to High School with a set of 12's and a 2k ;P
EXOcontralto 2 days ago
@EXOcontralto Oh yea Go big or go home .. btw I seen something on youtube that looked a little fake to me 35 inch subs ..common wtf
psementalist 2 days ago
Oh cool
allensw74 5 days ago
@allensw74 - Thanks for watching & commenting man!
EXOcontralto 4 days ago
She was like what the hell are u talking about
damianspidell 5 days ago
@damianspidell - LOL, she's the cutest little shit! :P
EXOcontralto 4 days ago
Why wouldnt you hide the crossovers behind the kick panels to keep the door pockets useable?
allensw74 5 days ago
@allensw74 - Wouldn't fit.
EXOcontralto 5 days ago
where do you run all the blue wires from?
cornhole0791 1 week ago
@cornhole0791 - The amp...
EXOcontralto 1 week ago
@EXOcontralto and then to the passive crossovers?
cornhole0791 1 week ago
@cornhole0791 - Yes, and then to the speakers.
EXOcontralto 1 week ago
@EXOcontralto im honored that you actuallt replied haha
cornhole0791 1 week ago
@cornhole0791 - No problem man - If you ever have anymore questions - Just post a comment, and I'll reply every morning :)
EXOcontralto 6 days ago
@EXOcontralto good to know
cornhole0791 6 days ago
lmao 1:57
Skullz747 1 week ago
@Skullz747 :D
EXOcontralto 1 week ago
hey exo... i know this is a old video and all.. but whats your take on passive and active crossovers.. i have 3 amps.. 1 for bass 1 for my door speakers and 1 for my tweeters.. i dont use any passive crossovers but what the settings are on my amp.. should i get a passive crossover for the tweets or door speakers?
MrMxAudio 2 weeks ago
@MrMxAudio - No way, stay active like you are - That's the best way to do it, but the most expensive :)
EXOcontralto 2 weeks ago
so when the speakers have passive cross overs you dont need a amp to power it?
hulkzoom 3 weeks ago
@hulkzoom No you want an amp even more because the passive crossovers take away some power to work.
SenorDennis 5 days ago
whats the difference between deep cone tweeters and regular tweeters are they better or they put out the same noise?
Dorisequador 3 weeks ago
@Dorisequador - Not really sure that you mean by "deep cone tweets" - But the difference between dome tweets and cone tweets are that one is convex, and one is concave. Horn tweets use 2 diaphragms to vibrate air via impedance transformation.
EXOcontralto 3 weeks ago
@EXOcontralto hey exo, i just got some audiopipe crossovers for my 6x9s and some 4 inch, do u think its safe to run these 2 speakers to the same terminal for mid range on the crossover? thanks
Razon35 2 weeks ago in playlist More videos from EXOcontralto
@Razon35 - I've seen it done before, but you often times loose output, and always have your crossover lit up like a Christmas tree.
EXOcontralto 2 weeks ago
@EXOcontralto oh aright,, damn i dreamed i was giving u a demo of my 18 lol except instead of it being in my talon it was in a tahoe? haha
Razon35 2 weeks ago
@Razon35 - Possible future vehicle!!!? Nice man! :)
EXOcontralto 2 weeks ago
so when you took off the bracket is the tweeter still on it ?
or did that come off with the bracket
nyylilg53 1 month ago
@nyylilg53 - It's a push and twist mount
EXOcontralto 1 month ago
how did you route those crossovers to an amp
ImportRunner21 1 month ago
@ImportRunner21 Simply plugged them in... - That's what the main input wire is for...
EXOcontralto 1 month ago
@EXOcontralto ok never ran one before and didnt see you run it thanks
ImportRunner21 1 month ago
Comment removed
TheTech411 1 month ago
good to teach em when their young hehe
xianos707 1 month ago
@xianos707 - You know it mang :)
EXOcontralto 1 month ago
If I wanted to run 2 or 3 sets of tweeters could I run all of the tweets for one side off a single crossover or would I need multiple crossovers?
devo85x 1 month ago
what type of calculator did you use to film?
freestyla101 1 month ago
@freestyla101 - Texas Instruments TI-86
EXOcontralto 1 month ago 6
@freestyla101 what type of motive do you use when you steal this blown up troll comment from people.
RedHotFlam3 1 month ago
@RedHotFlam3 It provides me with the humor i need to get on with my day. Thank you for your concern. Besides, for all you know i could be the creator of this comment therefore i am not perpetuating it as it is my intellectual property.
freestyla101 1 month ago
bostons are good speakers. I picked up a cheap set of lower level boston's a few months ago and they sounded good, until I put them on a 600.4. Lets just say they are toast lol.
stratmemph1 1 month ago
@stratmemph1 - Damn! But yah, for the most part Boston makes great stuff.
EXOcontralto 1 month ago
@EXOcontralto yeah very sound quality oriented. I have to start experimenting more with new equipment since there are literally no memphis dealers out here in Hawaii and you can't buy it online. Kind of sucks, but I have taken a liking to kenwood and believe it or not phoenix gold has put out some real solid products after being bought out by AAMP.
stratmemph1 1 month ago
wat subs do you have?
dielan44 1 month ago
@dielan44 - Robbie has 2 PSI 12's
EXOcontralto 1 month ago
@EXOcontralto ah nice, they produce good bass as far as I could hear haha, thanks for the quick reply.
dielan44 1 month ago
@dielan44 - No problem man, but in this video he was running two Type X 12's
EXOcontralto 1 month ago
@EXOcontralto ohhh ok! which would you say are better?
dielan44 1 month ago
@dielan44 - The PSI's by far.
EXOcontralto 1 month ago
did you connect the speaker wire to the cars wiring harness or the head unit wiring harness? does it matter?
emmansk7 1 month ago
@emmansk7 We hooked it up to the amplifier because we aren't using the deck to power the speakers.
EXOcontralto 1 month ago
ghetto install haha
chubbyswgates 2 months ago
@chubbyswgates - Hey, we all learn.
EXOcontralto 2 months ago
Bostons are great
ndviper 2 months ago
@ndviper - Yes sir, very nice sounding speakers.
EXOcontralto 2 months ago
where does the main end wire connect to??
filipinokidd386 2 months ago
@filipinokidd386 - The "main in" goes directly into the crossover
EXOcontralto 2 months ago
hey if i have the Clarion EQ746 do i still need crossovers for my mids and tweets? thanks EXO
muscleammo 2 months ago
@muscleammo - No, if you decide to go active.
EXOcontralto 2 months ago
exo i have a question, i was going to install tweeters that run of the door speakers but i dont know if i should use a cross over or a capacitor? thanks
BurtonSnow241 2 months ago
@BurtonSnow241 - You mean just a Xover? - A sole cap wouldn't do anything here.
EXOcontralto 2 months ago
i bet people that dont know him pick on his van. . . then he drives by and every window they own is shattered. that'll teach you.
dsmithIII0221 2 months ago
actually your suppost to test it before you put the door back together
AmericansFavorits 2 months ago
This has been flagged as spam show
Great video, but can you explain to a stereo-noob how "exactly" the wires connect to the speakers? Such as, are there different methods (solder, plugs, etc.) the speaker-wire connects to the audio-components? I'm planning on doing an install and I just need to know what to get for that since I am doing a complete re-wiring job and I have no idea how to attach wire to speakers. Thank you.
lastormtrooper 2 months ago
Great video, but can you explain to a stereo-noob how "exactly" the wires connect to the speakers? Such as, are there different methods (solder, plugs, etc.) the speaker-wire connects to the audio-components? I'm planning on doing an install and I just need to know what to get for that since I am doing a complete re-wiring job and I have no idea how to attach wire to speakers. Thank you.
lastormtrooper 2 months ago
@lastormtrooper If your doing a complete re wiring, might be better to get someone who knows what they're doing to give you a hand. All cross overs and amps usually have a grub screw style inlet/outlet so its just a matter of inserting the right wires and tightening the screws down. But it can a little confusing if you dont know what your doing.
yippe 2 months ago
hey, whats the small speaks doing? iam a noob so please dont be mean^^
Fagzor1337 2 months ago
@Fagzor1337 - Tweeters reproduce high range noises
EXOcontralto 2 months ago
"hey guess what?" to the 3 yr old lol!
bonvivant55 2 months ago
@bonvivant55 - Start em' young :)
EXOcontralto 2 months ago
oooo yea!!
ismaelrdgz1 2 months ago
""""TWIStA"""
TheJrod79 3 months ago
So u need crossovers if u want tweeters?
Or else it won't sound nearly as good right?
bballxp001 3 months ago
@bballxp001 - You need crossovers when you have tweeters and don't want to spend the money to go "active" - instead of "passive".
EXOcontralto 3 months ago
@bballxp001 i thought i just should elaborate. Active means the tweeters are on a separate channel from the mids, and each channel has a different crossover setting to "filter" out what you dont want each speaker to play. The more channels needed for active often make it cost a decent amount more but you can mix match mids and tweets to suit your needs. Passive is what is in the video.Great vid exo, i remember watching this in my noob days trying to learn, you taught me a bunch.
HitemWithTheFlex 2 months ago
Nice, music dork
wdissident 3 months ago
what was the point of the crossovers?
TheTechGuider 3 months ago
@TheTechGuider filter the highs to tweeters and lows to mids
iamukt55sto 3 months ago
@TheTechGuider limit what each component of the set receives which frequency range. You wouldnt send a 40hz tone through a tweeter would you? Usually the midwoofer output of the passive crossover doesnt let the midwoofer(6.5") play below i think 20hz or so so it plays mid frequencies up to 8000 hz or around that number. The Tweeter(usually 1" dome) output of the passive crossover filters out anything below 4000hz so the tweeter only plays high frequencies.
HitemWithTheFlex 2 months ago
this video was helpful thanks man
eddiegreen209 3 months ago in playlist More videos from EXOcontralto
@eddiegreen209 - No problem, thanks for watching!
EXOcontralto 3 months ago
I love this guys voice haha
AirsoftPwnage1 3 months ago
Everyone says that it is better getting a pair of components rather than rear 6x9s, do decent front component speakers still have the bass of a 6x9, without the need for a sub?
Souprx 3 months ago
3dgameman used this song in his intros a while back. do you remember the song name?
jsnyara 3 months ago in playlist More videos from EXOcontralto
@jsnyara - It's not the same song.
EXOcontralto 3 months ago
@EXOcontralto i think he stole yours :)
jsnyara 3 months ago
@jsnyara - Show me a video?
EXOcontralto 3 months ago
@EXOcontralto well. same beat. 3:45 in /watch?v=4BT-GbRBdiQ&feature=channel_video_title
jsnyara 3 months ago
@jsnyara - Wow, you're right - It does sound similar.
EXOcontralto 3 months ago
what brand and model was the crossover used in the vid?
T1601624 4 months ago
@T1601624 - 2:29 - Did you watch the video?
EXOcontralto 4 months ago
look up beginnercarmods, they have a really good video on this
anf6189 4 months ago
da first 1 u put
mateolokon 4 months ago
yo wats da name of da song?
mateolokon 4 months ago
@mateolokon - Which one?
EXOcontralto 4 months ago
@EXOcontralto the 1 he puts wen his ganna test it
mateolokon 4 months ago
i watched this video when i first got started on my car audio and now that i know the difference between coaxial and component those sound pretty clean !!!!!!!
allgood0187420 5 months ago
@allgood0187420 - Thanks for the comment!
EXOcontralto 4 months ago
how are those boston speakers performing?
invizi0n 5 months ago
@invizi0n - AMAZINGLY! - Check out my 2nd channel for another complete install with the Boston pro 60se's.
EXOcontralto 4 months ago
can you do that some thing with out the crossover? like run the speaker wire straight to the amp?
Stitch2Scope 5 months ago
Good video!
FB045 5 months ago
So can you wire crossovers with out having a amp? Friend is going to add a sound bar in his Jeep and he keeps reading up people saying you need a amp but I don't see why you could not just run the stock speaker wire to the crossover instead.
thirdgenguy17 6 months ago
Do u like subwoofers?
natedogg5643 6 months ago
should i get tweeters for dubstep, and whats mid drivers do is it important?
3khudson19 6 months ago
3dgameman?
workshop4life1 6 months ago
You need a window roller removal tool too, if you don't have power windows. Found that out yesterday and had to make a second trip to the parts store.
STAZE27 6 months ago
if i get a 4 channel amp powering all my speakers can i just hook tweeters up to the head unit?
brandon13ellis 6 months ago
creep fast
bexysutt 6 months ago
exo u should get a car like a civic
JJBproductions21 7 months ago
so, do i need crossovers if i want tweeters in my car?
brandon13ellis 7 months ago
hey...i need help...i got a 2channel amp...and i want the sub to play bass...and the 6x9 to play mids and high..so how do i wire it ? thanks in advanced
DeejayDimez 7 months ago
98 chevy suburban tahoe or whatever..!? Lol I got a 98 z71 pick up
ACDCJUNKEY 7 months ago
wat are passive crossovers for and how do they work??
THCxBoricuax 7 months ago
what are passive crossovers?
FromThe3PointLine 7 months ago
@FromThe3PointLine they split the frequencies to the different drivers so that they can reproduce the sound more clearly, and mor fit to the designed function of the actual driver's range..
Jman9112 7 months ago
@FromThe3PointLine really? Crossovers let frequencies at a certain range play while cutting the rest out. For instance, you don't want tweeters to play anything lower than ~2khertz and the mid woofer to play anything higher than the same range. Sometimes they can be crossed to overlap but it really depends on installation. To put it in a nutshell Speakers of all sizes have a range of frequencies it is suited for. Crossovers help control that dynamic of the sound coming out of the speaker. Easy?
khyoon14 7 months ago
Nice work! Provided the info that was needed... Short, simple & VERY detailed. (5 Stars)
DaCreatah 8 months ago
Prying on the door panel with a screwdriver or pliers is a good way to break retaining clips.
You're supposed to pull the door UP and then towards the back or front of the car, not pull out.
z28roxy 8 months ago
@z28roxy absolutely.
khyoon14 7 months ago
Song name?
TheCaramelflavour 8 months ago 4
@TheCaramelflavour the song at the end is Twista - Creep Fast ft. T-Pain
FEPatino57 2 months ago
what is a crossover
mrbobie93 8 months ago
i have this car and i just could not take the door off so i had to use pliers and a dremel to take out the saftey grill and i had to work with the speaker through the bottom of the door. omg soooooo anoying
fingerandskateboard 8 months ago
hey i have a question, do you need an amplifier to power up those components?
lovem56 8 months ago
hey exo i got a very big quietion wat is the cross over ued for
1computerhelp 8 months ago
This has been flagged as spam show
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks a lot!
BaelemKentER 9 months ago
This has been flagged as spam show
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
BaelemKentER 9 months ago
This has been flagged as spam show
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks a lot!
BaelemKentER 9 months ago
This has been flagged as spam show
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
BaelemKentER 9 months ago
Hey does anyone know where I can get a pair of tweeter mounting brackets just like the ones in this video? A friend of mine gave me a pair of cerwin vega tweeters, but he lost his brackets and I dont know how else to mount them. Thanks!
BaelemKentER 9 months ago
hey where can i get tweeter mounts just like the ones in this video? A friend of mine gave me 2 cerwin vega tweeters and I have a '98 chevy truck with the same door panels. My only problem is finding another way to mount them. Thanks
BaelemKentER 9 months ago
hey where can i get tweeter mounts just like the ones in this video? A friend of mine gave me 2 cerwin vega tweeters and I have a '98 chevy truck with the same door panels. My only problem is finding another way to mount them. Thanks
BaelemKentER 9 months ago
This has been flagged as spam show
How do you install a crossover with 4 inputs? (tweeter +,- and Woofer +,-) do you use one output from the amp and split the + wire into two and put it into the tweeter and woofer + and like wise with the -? Thanks!
mmar4281990 9 months ago
Haha, what a great vid!! I loved it! =D
spooky00pooky 9 months ago
Man those Boston Pro 60's are the shit. I used them in my burban back in 04 and man do I miss them. I ran them off the stack-able Alpine 150wx4 and they screamed and the clarity was out of this world. But now I am running jl cs-650 6 1/2. I love Boston's sound quality better though. I know you gotta love them. You makin me wanna switch back to them...lol. Nice vid
towerg4 9 months ago
Man youve got a video for everything, your the man Exo!!!
ArgyleDub 9 months ago
I would have put the crossovers under the seat or somewhere more convenient. Also would have had the tweeters flush with the door. Over all good video.
sdwagonjp 10 months ago
lol hey guess what......hahaha that was awsome exo loveing the comedy
MrRemixme 10 months ago
@MrRemixme - Thanks, You know it man :P
EXOcontralto 10 months ago
i love how people take crappy cars and put nice speakers in, instead of making the car look nice with the money.
KonnerKoonz 10 months ago
@KonnerKoonz - That's the story of my life - I love having a sleeper :)
EXOcontralto 9 months ago 27
@EXOcontralto yeah my car is kind of a sleeper to. I have a 2000 Mazda 626 and have a complete system and a viper 5901 alarm. Tinted windows is the only thing that isn't stock that is visible from the outside.
xLinkinPark209x 7 months ago
@KonnerKoonz Because when you have nice speakers you can enjoy that for yourself. Making the car look nice does nothing for you while you are in it :p
zetapingpong 8 months ago 2
@KonnerKoonz
maybe they just want a nice soundsystem and don't give a shit about the car.
bonus is that it doesn't attract thieves because they assume you have a shitty deck and woofers (unless you're blasting subs in the parking lot)
TheRaveClinic 8 months ago
@KonnerKoonz when the car is wrecked/broke down or totaled the audio system can be removed and added to the next car, but you cant do that with a painjob/dent repair or whatever
MoreLikeCappuccino 8 months ago 2
@KonnerKoonz I'd take high sound quality over "looking nice" any day lol
MiLkMaN316 8 months ago
@MiLkMaN316 that makes no sence
KonnerKoonz 7 months ago
@KonnerKoonz yea well not everybody has enough money to get a fancy expensive car but does have enough money to some nice speakers so... :)
potrebnifukec 6 months ago
@potrebnifukec its called saving up dumbass
KonnerKoonz 6 months ago
@KonnerKoonz i know that. and you really don't have to call people that you don't know a dumbass
potrebnifukec 6 months ago
@KonnerKoonz cause if you buy a nice car and fill it with speakers youre just gonna rip it apart so mught as well go ahead and get a not so nice car
zacharybg17 6 months ago
Hey guess what?
I got one whole door completed!
MetallicaRocks93 10 months ago
the other twister song is TWISTA I AIN'T THAT NIGGA
rubixcubeluken 10 months ago
I have an issue i wired my tweeters directly to my amplifier ,i am using an active crossover set up ,. only issue is at high volumes my tweeter is loud and plays with no distortion at all ,.. but the vocals sound low everything else sounds fine but the vocals ..i played with the head units equalizer and i have also adjusted the crossovers , changed out rca cables , used a cd instead of the ipod connection ,changed tweeters .. but to no avail i end up with the same results wtf am i doing wrong :(
091ramon 10 months ago
this passive crossover things are new to me, ive been out the game for awhile but i got 4 way kicker 6x9 s in da back, should i put some passive crossovers on them?? trying to understand thanks
sikkshady 10 months ago
hey man i got a question... what if i got a car that has all this stuff but not wired up at all i dont have the crossover and dont have a stereo either but i got some pretty cool speakers and 2 tweeters that ima put on the back of the car. Would this be the same process or is it a little different?
adiaz8892 11 months ago
im still lost. so do i run my crossovers into an amp or can i just attach the cross overs to the normal speaker cables. may sound like a stupid question but i dont know much about car audio :)
Richo2308 11 months ago
Hey exo I'm getting me some of those pro 60s hope they sound good!
killersthe 11 months ago
what kind of crossover is that
darytaw 11 months ago
WHATS THE SONG AT THE END?
fcporto7portugal 11 months ago
@fcporto7portugal Twista - Creep Fast ft T-Pain, Tech N9ne and 2pac
ToxicBarracuda 11 months ago
but question i thought that the amp as a cross over in it 2?
MrZiggy1979 11 months ago
Great Vid man :)
Wilfahrt21 11 months ago
Is that freakin foot steps or stomping at the end of the video. :)
madio1231 1 year ago
How much did all that go for?
Jwillzva 1 year ago
hey i have a quick question, i was gonna buy them pro series speakers, and i noticed that they were 3 ohms...will they be ok with my aftermarket head unit...its a pioneer avic z120 and i was thinking about getting a amp for all the mids and highs that will be pro series...is it better to get a 2ohm or 4 ohm amp?? thanks, great videos man!!!
mikgto68 1 year ago
were is the main wire from
funyguy07 1 year ago
hey wats the song on 2:51 ??
santubaba 1 year ago
hey exo does robby have any videos of his install
mboydrummer 1 year ago