what gauge wire did you use? the tone sounds awesome. point the horns down so that water can't get in, and it also sounds like you need to oil your compressor.
Oh yeah, I think I know where Lake Clark's at... And I get what you're saying about the Dodges, I'm a Chevy guy myself but those Dodge Rams sure are a hell of a truck! I personally don't like the 1500's but I'm crazy about the 2500's and up!!! Same way with the Ford trucks (year 2009 & up).
@Texasredneck101 Actually it's Lake Clark (Ennis, TX). And thanks man. Although, I just traded in my truck this Thursday due to high mileage and the start of some problems. I got an amazing deal on an `08 Dodge Ram 1500 Laramie. So, I went from Chevy to Dodge, but to be honest, I thought I'd never like one but I do.
@bigmike062293 do some research man all silverados (except 3/4 ton 1988-89) after 88 are torsion bar suspension. and i did a 6 in by myself and it was a bitch
@pudops I'm just gonna get the normal sized tires that my truck uses which is 265/70R17. I'd like to lift my truck a few inches some day and get some nice shiny chrome rims so I can get some bigger tires as well.
But I wanna save up my money so one of these days I can get a new truck. I'm wanting to get a 2011 Chevy Silverado Texas Edition. Those are soooo freakin' nice. :-P
@GitRDoneDaleJr Sounds like you are making your Chevy even more beautiful then it already is. Should post a walk around video of it now showing it off with its HIDs. Again, I love Chevys and have seen a million of them, but your is just so slick and I can tell that you love it and take good care of it!
@shazbotninja I sure do! I detail it once a week, and am always keeping it shiny. It wasn't shiny in this video though. I'll have to do a new walk around video of it sometime this weekend for you. I'll do one during the day with the HID's on and at night so you can see the brightness. Only thing is I don't have the Dixie horn anymore because the air compressor went out on me. Saving up for some train horns now! ;-) I'll keep you posted!
Thanks. Yeah, I couldn't find an empty spot for the horns at first, so I decided to take the bracket off, so I drilled holes in it, which could fit 4 horns, so the fifth one i drilled a hole through the bracket where it bolts to the truck. The compressor is under the bracket on another one just above the fender.
@kurtzrt1000 you can get em on e bay
MrKorn1011 3 months ago
Did you transfer your horns to your new truck?
hellokityfartsniffer 7 months ago
where'd you get your dixie horn from
kurtzrt1000 8 months ago
the horns are way out of tune. check the relay and compressor.
skezza 8 months ago
@skezza no its the manufactuer they use to make it right now theyve got all there horn sounding like crap
ror3dracer01 2 weeks ago
what gauge wire did you use? the tone sounds awesome. point the horns down so that water can't get in, and it also sounds like you need to oil your compressor.
aidanjmclean 9 months ago
umm i was waiting for the dixie horn? waste of my time
itta320 10 months ago
@itta320 guess u didnt wait long enough its in the video
brettmjones 1 month ago
Oh yeah, I think I know where Lake Clark's at... And I get what you're saying about the Dodges, I'm a Chevy guy myself but those Dodge Rams sure are a hell of a truck! I personally don't like the 1500's but I'm crazy about the 2500's and up!!! Same way with the Ford trucks (year 2009 & up).
Texasredneck101 11 months ago
You live in texas? Me too!! Haha. That looks like Lake Ray Hubard? I live about 30 minutes from there. Nice truck by the way!
Texasredneck101 11 months ago
@Texasredneck101 Actually it's Lake Clark (Ennis, TX). And thanks man. Although, I just traded in my truck this Thursday due to high mileage and the start of some problems. I got an amazing deal on an `08 Dodge Ram 1500 Laramie. So, I went from Chevy to Dodge, but to be honest, I thought I'd never like one but I do.
GitRDoneDaleJr 11 months ago
@bigmike062293 do some research man all silverados (except 3/4 ton 1988-89) after 88 are torsion bar suspension. and i did a 6 in by myself and it was a bitch
GreatOutdoors163 11 months ago
failed
daddygreenjeens 11 months ago
@bigmike062293 I don't think I'd have the time to do it though. I'd have to see though. Thanks for the info! :)
GitRDoneDaleJr 11 months ago
A Man's Truck is his castle! -Cooter
billybobjoe444 1 year ago
@billybobjoe444 you're right lol i remember these episodes ... good times
derick4767 9 months ago
Dude that is one Sick truck!!!!!!!!!!!! im jealous
pudops 1 year ago
@pudops Thanks Pudops! :-)
Will be getting a Brush Guard on it in the beginning of June. And soon I will be putting some Goodyear Wrangler Duratrac tires on it as well!
GitRDoneDaleJr 1 year ago
@GitRDoneDaleJr Nice What size tires are they?
pudops 1 year ago
@pudops I'm just gonna get the normal sized tires that my truck uses which is 265/70R17. I'd like to lift my truck a few inches some day and get some nice shiny chrome rims so I can get some bigger tires as well.
But I wanna save up my money so one of these days I can get a new truck. I'm wanting to get a 2011 Chevy Silverado Texas Edition. Those are soooo freakin' nice. :-P
GitRDoneDaleJr 1 year ago
@GitRDoneDaleJr a lift kit only cost a few hundred buck. yes save your money and get the 11 silverado
pudops 1 year ago
@pudops Actually I've searched. It seems to me that lift kits are $1,000 per inch. At least around here they are.
GitRDoneDaleJr 1 year ago
Forget the horn, that is one slick looking Chevy!
shazbotninja 1 year ago
@shazbotninja Hey man, I appreciate it. It looks a whole lot better now though after installing the HID's and having been detailing it recently. ;-)
GitRDoneDaleJr 1 year ago
@GitRDoneDaleJr Sounds like you are making your Chevy even more beautiful then it already is. Should post a walk around video of it now showing it off with its HIDs. Again, I love Chevys and have seen a million of them, but your is just so slick and I can tell that you love it and take good care of it!
shazbotninja 1 year ago
@shazbotninja I sure do! I detail it once a week, and am always keeping it shiny. It wasn't shiny in this video though. I'll have to do a new walk around video of it sometime this weekend for you. I'll do one during the day with the HID's on and at night so you can see the brightness. Only thing is I don't have the Dixie horn anymore because the air compressor went out on me. Saving up for some train horns now! ;-) I'll keep you posted!
GitRDoneDaleJr 1 year ago
what size bed is that?
Countryboy052194 1 year ago
@Countryboy052194 Short bed, Half-ton Crew Cab Silverados/Seirras only come way.
watso64 1 year ago
@Countryboy052194 It is a 5 foot bed. The normal short bed trucks are usually 6 foot.
GitRDoneDaleJr 1 year ago
nice horn
generalleefan01 1 year ago
nice truck i wish id had one, i dont car for the newer bodystyles though
DexDizzy 2 years ago
This comment has received too many negative votes show
im a ford man bud that isa clean truck them stickers u got must add about 10 mph to your truck
grizzlyman213 2 years ago
Yeah it's a little tempermental. I really notice a change from hot weather and cold weather. Haver a good gauge wire helps it alot
bjowers29 2 years ago
Yeah, it's quite slow during cold weather. But it's great in hot weather. Especially here in Texas, been 100+ for the past like 2 weeks.
GitRDoneDaleJr 2 years ago
nice horn, but it was a little too high pitch. still though, its sweet. nice truck too.
TheBandit77TransAm 2 years ago
Pretty cool check out mine it's on a 2009 Dodge Challenger
bjowers29 2 years ago
It looks nice, it seems like ya did a good job on the install
Z71ricrkilr 2 years ago
Thanks. Yeah, I couldn't find an empty spot for the horns at first, so I decided to take the bracket off, so I drilled holes in it, which could fit 4 horns, so the fifth one i drilled a hole through the bracket where it bolts to the truck. The compressor is under the bracket on another one just above the fender.
GitRDoneDaleJr 2 years ago