How to setup a Lee 4 Hole Turret Press

[alzathoth]

you camera angle makes it difficult for a new reloader. i wish i could see waht was going on... :(

[menchimutt]

Hi Can I use this press to reload a 270 win? Thanks

[tharr2008]

@menchimutt Yes the press will reload 270win.

[USRimfireShooter]

What's the point of using a dedicated factory crimp die when the lee seating die has a crimp built in? My dad just gave me a 3 turret press and a bunch of calibers set in turrets. None of the of the die sets have that 4th factory crimp though. Is the 4th die necessary?

[BED313]

your camera angle makes this worthless, delete it and try again, your helping no one.

[tharr2008]

@BED313 Yes the camera angel is a little low but i'm describing what i'm doing so i disagree with u that the vid is worthless.

[fsuphd]

@BED313 Pretty tasteless to be this critical...and go back to third grade to learn the difference between your and you're...

[thndahd]

dude you fuckin suck!!!!!!!!!!!! get your camera angle fixed or get off the net.....

[metweezer]

Not informative at all. I don't think he knows what he is doing.

[EvanQuinn07]

what's the differsnce between the LEE 3-hole & 4 hole press? besides the OBVIOUS, one has 3 the other 4 holes........is it to change out different caliber dies?

[tharr2008]

@EvanQuinn07 No difference one has three holes the other one has four that's it.

[ahilgy]

@EvanQuinn07 different die sets. riffles will mostly use a 4 die set where pistols will use a 3 die set. pistols will seat and crimp in the same die.  im kinda new to reloading but thats only thing i could think of.

[JonasEdman]

does it work fine with all kinda Rifles ?

[frasatat2]

@JonasEdman it does up to 50 cal, but u gota remove the indexing rod 4 any thing larger than 223 & manually index it by hand. still works the same though & just as fast with a bit of practice.

[usmc158]

what size bolts do u need to mount the press or dose it come with it

[throatkutter]

Thanks for the video. I just ordered one and I am looking forward to trying it out. I wish you would've moved the camera up on all the action instead of showing the bottom of the press during the entire video.

[gerardbu123]

There are some mistakes on this video. One your first die was ajusted without the shell holder, number 2 you should adjust the sitting of the bullet by inserting a factory bullet so that the bullet sitting dye could be adjusted by turning 1/2 a turn for ligth or full turn for more crimo

[mustang1781]

I wish I could see what was going on up top

[ralphhubbell]

You wasted your time showing nothing but the bottom of the press when all the action was up top out of camera range. Don't you review it before submitting?

[ressikanflute]

Would this be good for loading 38 Special and .357 Magnum? Expect to shoot about 200 rounds every week

[tharr2008]

@ressikanflute This press works great for all handgun reloading.

[CimarronPeacekeeper]

Shell holder goes in first

[hardman476]

what powder despencer does the deulux kit come with...and with regards to bullet seating when you set it up how you set it up so it does not seat the bullet to deep into the case?

[surfish01]

When realoading .40 cal I set up the resizing die properly but it looks like the shell does not go in the whole way. There is a ring around the bottom and it looks kind of like a bulge. Nothing mojor. All my equipment is brand new. Is this how they are suppose to look ?

[juliosara1]

i cant really see you installing the dies and how to install the powder measures

[OregonBackpacker]

for pistol (9mm) do i need a 3 or 4 hole turret press. what else do i need to buy to make the press work? great vid by the way.

[tharr2008]

@OregonBackpacker I would get the 4 hole press. For 9mm your going to want to get the carbide crimp die it crimps the bullet and post sizes the case to remove any case buldges.

[akushner1967]

Nice video -- Thanks for posting it!

[dogishappy0]

I'm looking at getting into reloading, do you get everything you need to reload out of the box (minus the bullet, primer, casing, and powder of course) or are there aditional things you need to buy? I'm pretty sure i need to get the dies, but what else do i need to get?

[tharr2008]

@dogishappy0 Watch my basic reloading video it shows all the extra stuff you need for reloading.

[JuanCAlberto]

Have u been able to invent something to catch the old primers after they fall into the press?

[pepitolocuas]

Hey, good video. I've been using this same press for about six months to reload a few different calivers. In that time I still don't quite know how to use the AUTO-DISK POWDER MEASURE. Maybe you could make a video about that. Thanks!

[bigpimpinmma]

can this press be used for 9mm 45 acp and 50 ae?

[88jay4you88]

How do you put the shell holder in?

It apears theres something you attach to it and it slips into place?

[JuanCAlberto]

@88jay4you88

The shell holder just snaps into place

[Sadaf333]

I just bought this press so this video will be helpful. Good video.

[donnbel]

Helpful video. I just get the kit however there was not a primer dispenser with it, is that something you need to buy separate?

[Deeep6]

Super helpful video. Maybe one with a little better camera angle to see the double riser and powder holder.

Thanks !!

[tharr2008]

Yeah, I didn't know about the bad camera angle until after I saw it on my computer. Thanks for watching.

[schancke]

Great video! Keep it up:)