You call that one coat..? I could paint a wall with that amount of paint. It's kind of funny how you sprayed like four coats in one, told people not to use too much and then continued spraying... President of what, your bedroom? :s
This paint is terrible for plastic, man when I used it let it dry for about a week and then put it back together. I still spelled like paint and it wasn't even dry. Eeven though this is a good vid use Krylon fusion insteed.
sorry i just cannot take it seriously...you say "incorporated" ...just because you bought krylon and paid a "tax" when you did, isnt really a reason to say you are now a "corporation"
2nd...you are using Krylon...the same stuff that 17 year old kids use to paint a 1987 toyota corola flat black or "primer" (as though they are really going to ever get it painted)
nobody here is buying the BS...just say, here is how to paint a 360 using a rattle can...then you are mr honesty and we like it more
this might be a stupid question but i dont really wanna spend any extra money paintin this shit...but i have plenty of wall paint and wall primer sitting around so could it be possible to use wall paint?
i just used some sand paper on the side of my xbox and it seemed to work just fine, then i baked it on under a heat lamp, im just saying there is an alternitave to primering, both are equaly easy but i had an elite so it already had that primer finish to it the sand paper just helps DO NOT PUSH HARD ON THE SAND PAPER!!! otherwise you will end up with big cuts in the side of the case, just light stokes across it, if you need any help email me at cbayles_75@hotmail.com i would gladly help you
If it dries in 15 mins. Why are you coming back in an hour. That's going to make the paint crack. And President? Really. Haha. For who want actual Painting tips and awesome 360 Custom Painted Controllers, Check out my page. I'll be more than happy to help you.
I sprayed with silver enamel spray paint and held it the whole time and i threw on some laquer and it turned out great. I sprayed about 2 or 3 times, let it dry, then sprayed again every 15 minutes and let it air dry for about 10 hours overnight and it was glass smooth. I would say I put about 24 coats on it give or take lol. 3 times it was sprayed, 15 minutes later spray again, repeat about 6 times.... Turned out good and smooth though...
Yes, when you disassemble your Xbox 360, you have to break a factory seal and if you break it they won't fix it for you because A you could either flashed your Xbox or mod in some separate way.
Well just like any other paints especially spray paint there are fumes but if you do it in the basement or in a garage with the door open you wont be bothered by them as much.
i love these guys they need to make more videos though i need help on fixing my xbox 360 e73 error how do i fix it i tried doing the xclamp mod but no help :( it shows 2 red rings in like 10 seconds.
damn those rrod's anyway u fix it by keeping a chip ithink its a chip anyway by keepin it from overheating tht way the 360 doesnt overheat my m8 put a fan on his u can buy them from some where for £2.50 i think its ebay and u need to buy a power cord to go wiv the fan hope this helps cya or 1 more thing u can buy an official microsoft fan for like i think £50 anyway cya bye :)
I used 1200 on my controller lol. I used matte black on it and now it looks like an identical copy of an elite black controller. Perhaps I should try a courser one to get a smoother and more matte finish.
I have to paint outside and no matter what little particles keep dropping onto the case, and then stick to the surface. If I pick them off, it leaves a mark. Any suggestions? (note: This is not because i didn't clean the surface, it's from the air.)
yes most definately but this almost seems pointless unless your a little scared of opening it because if you send it to microsoft they may just be like oh well he has a painted case so he must have tampered with the insides but i have done that on one of my friends cases and the xbox still runs fine.
Can this be done to a computer case? I'm going to college soon and would rather spend the extra money on RAM and a good graphics card than a cool case, so if I could spruce up a dull case that would be wonderful.
Yes we maean sand paper and i would use 300+ sandpaper and wet and dry sand the surface sometimes 120 is a bit coarse. And yes we do knnow how to install plexiglass in our other cases we simply just bough the plexiglass and glued it behind the window using super glue and hot glue.
The answer to this question is yes all paint chips but so does paint on your house paint on your car. Due to the fact that your xbox does not usually get that much wear on the sides of your case it should last forever if your worried about it you can apply a clear coat at the end. If you throw your xbox around and are constantly rubbing it on the ground then the paint may chip and peel.
yeaa. it doesnt... weve painted several xbox's now and never have had any proble, if you disassemble the entire thing (which means you wont be getting paint on the actual xbox/motherboard) then theres no way exterior paint can hurt the internal functioning at all
i did that but in black!. it did it all at the same time just a minuite ago and im going to leave it over night and see what happens. please could you make a video on how to spray paint your hard drive please!!
hey nice cover anyway i painted mine using white spray paint then used red stripes will it catch fire when i put it all together and play it for a while will the paint ignite when the 360 gets hot? and the metal plate in one of the covers if paint gets on that will it catch fire when the 360 is in use ?
umm not that i know of... ha if that would happen id be shocked cuz ive never even heard of that, as long as the fans are functioning and you have your xbox in an area where it can get proper ventilation you shouldnt have to worry about that
I'd recommend waiting a while or two, (hour at minimum), let it dry, put a book or something under your 360 to let it ventilate properly, and there should be no issue, at least to my knowledge. All I can say is do your best not to get anything on anything that you had no intentions of putting on.
yo im 1 of yo subscribers i have a lag swich and some time it work and some times it just discinces me off xbox rite away please send me mesig about it ty (bangjomom)
it happens, and to be honest, i cant tell you whats wrong, try a different switch, maybe a different cable, if youre cutting the orange wire, try cutting the green one instead... any of those might work
well only one of the sides of the case is connected to the metal housing and yes we did remove that to create the window all you have to do is pull and the little plastic connections that hold it together will pull right off.
okay, so i painted my case all black with the rust-o-leum thing for plastic and it turned out pretty good except that if I swipe my finger or touch it with the top of my fingernails, it just scratches and the scratch doesnt go away...
what do you recommend because you guys have a lot of experience in this but its my first time.
first thing is sand it down really well, get off as much as you can.
after that you can basically paint like we need, try very light multiple coats...sand in between coats.
maybe try using a clear enamel as a final coat, this should provide better protection for the paint and it will make it more durable... it will also add a little shine
yea its orange um we did not create a video of how to make the TNT sign but ill make a video describing and showing instructions on how to do so....look back for updates.
:( I used a bi to hold it and it ran
MrRANDOM1100 6 months ago
You call that one coat..? I could paint a wall with that amount of paint. It's kind of funny how you sprayed like four coats in one, told people not to use too much and then continued spraying... President of what, your bedroom? :s
mysteryloser24 7 months ago 2
"dont worry if you think its too light or something dont keep putting it on" *45 mins later still spraying*
9677bowhunter 7 months ago
Wow what a peice of crap
CHASEGOESTOSEAS 8 months ago
This paint is terrible for plastic, man when I used it let it dry for about a week and then put it back together. I still spelled like paint and it wasn't even dry. Eeven though this is a good vid use Krylon fusion insteed.
lewisgreg981 10 months ago
does it break the warranty?
hateWinVista 11 months ago
This has been flagged as spam show
Learn how to meet women naneedj.info
hemanthiayesha 1 year ago
i dunno brown behind orange is not right, should have went with white behind it
SuperBrandango 1 year ago
this is the president speaking.....pfftt!!!
98ricky 1 year ago
This has been flagged as spam show
We have thousands of profiles about girls naneedj.info
montagmonta 1 year ago
shut the fuck up
to much talk
9498BUBBA 1 year ago
do u have to cover the air holes
desertdude1231 1 year ago
This has been flagged as spam show
beautiful video ........
if u earn money then visit my profile
nomorechatyou 1 year ago
can u do this with like paint paint not spray paint
YTDoABarrellRoll 1 year ago
sorry i just cannot take it seriously...you say "incorporated" ...just because you bought krylon and paid a "tax" when you did, isnt really a reason to say you are now a "corporation"
2nd...you are using Krylon...the same stuff that 17 year old kids use to paint a 1987 toyota corola flat black or "primer" (as though they are really going to ever get it painted)
nobody here is buying the BS...just say, here is how to paint a 360 using a rattle can...then you are mr honesty and we like it more
destin325 1 year ago
sweet window I bet that took a long time to do
GretchentheAlligator 1 year ago
NICE THAT MY XBOX IS MADE MINE LIKE THAT 100 BETTER
MODDED4MODs 1 year ago
can you use normal metal paint ?
techrated 1 year ago
subbed, but im not gna acually do it lol.
adxoxocrisp 1 year ago
are you suppose to cover the vents?! with painting tape?!...(o.O)
birdhouse065 1 year ago
that's how your suppose to spray paint everything.
MyDawgsKiller 1 year ago
this might be a stupid question but i dont really wanna spend any extra money paintin this shit...but i have plenty of wall paint and wall primer sitting around so could it be possible to use wall paint?
realsexy022 1 year ago
@realsexy022 Try it.
v12mini 1 year ago
@v12mini ha i just decided to go buy krylon fusion. didnt have to sand or use primer or anything. just sprayed it on and it looks great
realsexy022 1 year ago
Can you add me on fuckin Xbox Gt jaybarns100 i commented on alot of vids and subcribed
jaybarns100 1 year ago
Holy Crap dude ever heard of light coats, i guarantee that paint job came out like crap!
BlackBarryz 1 year ago
Buy PLASTIC paints.
Oxstayne 1 year ago
i just used some sand paper on the side of my xbox and it seemed to work just fine, then i baked it on under a heat lamp, im just saying there is an alternitave to primering, both are equaly easy but i had an elite so it already had that primer finish to it the sand paper just helps DO NOT PUSH HARD ON THE SAND PAPER!!! otherwise you will end up with big cuts in the side of the case, just light stokes across it, if you need any help email me at cbayles_75@hotmail.com i would gladly help you
Bayles20 1 year ago
what about the front? I would like the power button to be the same color as the rest of the case when painting is done
Aristowi 1 year ago
can you you krylon plastic?
xbox360turtorials 1 year ago
did u put sandpapaer on the xbox or y is it brown at first
InTeRvEnTiOnxxKAOS 1 year ago
wot is it u used for priming it???
rshirley360 1 year ago
If it dries in 15 mins. Why are you coming back in an hour. That's going to make the paint crack. And President? Really. Haha. For who want actual Painting tips and awesome 360 Custom Painted Controllers, Check out my page. I'll be more than happy to help you.
AKSpartanKiIIer 1 year ago
Do you paint the top and the bottom of the xbox? If you do, then isn't the paint going to go through the ventilation holes?
ipawnallofu 1 year ago
we do the first coat, then another, then the second, then maybe another.
wow really?
dabom222451 1 year ago
it also helps to put primer on it
WikedClownXxx 1 year ago
@WikedClownXxx all you need is plastic paint.
liamgreen94 1 year ago
this is the president speaking .. love that part
sakib2009 1 year ago
that would be better so you dont have to buy an elite or sumin
TheTrojans89 1 year ago
Dont Fuck With The President :)
Reconciliasion 1 year ago
please could you translate this tutorial for his Portuguese of Brazil for me, please, I'll do in my own is also not want to spoil it.
thanks.
boiola100 1 year ago
"THIS IS THE PRESIDENT SPEAKING" hahahahaha classic!
ttechnumber1 1 year ago 3
what if i just paint (with a QUALITY paint not krylon [like belton montana etc]) over the white (standard color)?
hitsforkids 2 years ago
I would just take it apart and paint the case in separate parts, it takes more time but its safer
RGInquisitor 2 years ago 9
could it fuck up my xbox 360
MrLilkiller55 2 years ago
ya you might just wanna take a permanent marker instead of spray painting into your vents lol
jonasman176 2 years ago
If you paint it wrong. :)
lewisgreg981 2 years ago
@MrLilkiller55 No
Kshef169 2 years ago
The president... HAHAHA ... I can't believe you can say that with a straight face.
For an INCORPORATED company with a PRESIDENT, you sure have a nice paint room.
Couldn't help myself. Thanks for the vid.
digitalPimple 2 years ago 15
@digitalPimple bwahahaha
elementalfiend 2 years ago 3
I sprayed with silver enamel spray paint and held it the whole time and i threw on some laquer and it turned out great. I sprayed about 2 or 3 times, let it dry, then sprayed again every 15 minutes and let it air dry for about 10 hours overnight and it was glass smooth. I would say I put about 24 coats on it give or take lol. 3 times it was sprayed, 15 minutes later spray again, repeat about 6 times.... Turned out good and smooth though...
Halosniper128 2 years ago
well put my friend.
bolis925 2 years ago
could u use model car paint
zwoods95 2 years ago
If you paint your case a bright color like yellow or green and you want it to really pop, use a base coat of silver first.
ARBuilder1776 2 years ago 2
the gold that was on it at first looked better
ggriffin13 2 years ago
120+ Grit LOL nuff said!
IBNGDYURMOM 2 years ago
It works but do it careful cuz u can tell when u over spray the same spot .
cokythe956 2 years ago
Retard. 1/5*
Nyxzimus 2 years ago
better gold dumbass
SuperGOWFREAK 2 years ago
doesn't that void your warranty if you do that? take off the case and what not?
iamtheultimate 2 years ago
Yes, when you disassemble your Xbox 360, you have to break a factory seal and if you break it they won't fix it for you because A you could either flashed your Xbox or mod in some separate way.
NinjaDKDavid 2 years ago
yeh but the rrod is easy enough to fix yourself ive heard
Burnsy360 2 years ago
do it smells after paining?
Xpack546 2 years ago
Well just like any other paints especially spray paint there are fumes but if you do it in the basement or in a garage with the door open you wont be bothered by them as much.
Comment and Subscribe,
TNTmodzINC
TNTmodzINC 2 years ago
ok thx
Xpack546 2 years ago
@Xpack546 yea it does
rippensucks 1 year ago
@Xpack546 lol
JJBruzProduct 1 year ago
Use paint thinner or white spirit to take the paint off
ChAoTiiCz 2 years ago
Question: Who the hell wants a bright yellow Xbox? O.o lol
Sdr1026 2 years ago
i failed.
i just bought silver paint, took the case off, and sprayed it.
then i touched it so it has dirty fingerprints all over it.
how do i get the paint off? please, somebody answer me...
supermanizgay 2 years ago
look up how to get paint off dumb ass?
killerbeau95 2 years ago
tragic, just tragic.
supermanizgay 2 years ago
You could just sand the prints in the paint smooth, clean it, and repaint it.
crkonecnik 2 years ago
Sand paper?
This is why you don't do stupid things while doing things you care about, you should proceed cautiously
ThePearI 2 years ago
Werent you supposed to put some sort of wax on it?
So it can look glossy?
Sorta like the wax they put on gym floors
UnleashedSoulz 2 years ago
That the glossy finish sprays in the very end
podracer6 2 years ago
Not if you will safely remove it ;).
RossiSlipStream 2 years ago
yea
clevelandtyler2 2 years ago
What do you think....
phxdrummer16 2 years ago
is the case plastic or metal i cant tell..
DylannF 2 years ago
Plastic
Bwpz 2 years ago
plastic
guitarplayingmonkey 2 years ago
there is no such thing as an OEM Microsoft Xbox 360 case.
GhostFerret3000 2 years ago
yea
maxbakerman 2 years ago
yes it will void your warranty be cuse u got to take a part your xbox to paint uor xbox
skaterland6 2 years ago
I don't like how you just show the technique on all your videos. I want to see you do it, then see the final product.
Bwpz 2 years ago
wait. so it still works if u dont take the case off?
archelleta 2 years ago
yes, but it might look a little more messy (the back of the xbox or front might get spray painted)
rockn2o 2 years ago
i love these guys they need to make more videos though i need help on fixing my xbox 360 e73 error how do i fix it i tried doing the xclamp mod but no help :( it shows 2 red rings in like 10 seconds.
bihohran 2 years ago
damn those rrod's anyway u fix it by keeping a chip ithink its a chip anyway by keepin it from overheating tht way the 360 doesnt overheat my m8 put a fan on his u can buy them from some where for £2.50 i think its ebay and u need to buy a power cord to go wiv the fan hope this helps cya or 1 more thing u can buy an official microsoft fan for like i think £50 anyway cya bye :)
pivotmasterzXD 2 years ago
what is sandpaper?? srry but im just from belgium xD
mav3161 2 years ago
paper that makes surfaces rough for paint to stick.
it is made by take sand and supergluing it to athick paper
iwantpk2 2 years ago
120 grid!!
I used 1200 on my controller lol. I used matte black on it and now it looks like an identical copy of an elite black controller. Perhaps I should try a courser one to get a smoother and more matte finish.
gazeebo88 2 years ago
so u have to to put primer on it right
ilovethecards6969 2 years ago
yea i would recommend using primer first but if you dont want to use it just make sure you have a sanded it well.
Comment and Subscribe,
TNTmodzINC
TNTmodzINC 2 years ago
Couldn't you use Adhesion Premoter to get the factory finish off?
- x1337xStickxManx
x1337xStickxManx 2 years ago
I have to paint outside and no matter what little particles keep dropping onto the case, and then stick to the surface. If I pick them off, it leaves a mark. Any suggestions? (note: This is not because i didn't clean the surface, it's from the air.)
Nintendogene 2 years ago
you could either set up a canopy/tent sort of structure so its a closed off area. or find a way to do it inside, maybe a garage??
TNTmodzINC 2 years ago
put it in a large box or put a box on top of it to cover it.
UberPwnage10 2 years ago
do you think if u taped over all the holes on the outside it would be safe to paint it with the case still on?
brendenp2011 2 years ago
yes most definately but this almost seems pointless unless your a little scared of opening it because if you send it to microsoft they may just be like oh well he has a painted case so he must have tampered with the insides but i have done that on one of my friends cases and the xbox still runs fine.
Comment and Subscribe
TNTmodzINC
TNTmodzINC 2 years ago
Can this be done to a computer case? I'm going to college soon and would rather spend the extra money on RAM and a good graphics card than a cool case, so if I could spruce up a dull case that would be wonderful.
joshua61991 2 years ago
When you say sand grit, do you mean sand paper it? Also do you know how to install plexiglass to the case?
TheHaYnSaint 2 years ago
Yes we maean sand paper and i would use 300+ sandpaper and wet and dry sand the surface sometimes 120 is a bit coarse. And yes we do knnow how to install plexiglass in our other cases we simply just bough the plexiglass and glued it behind the window using super glue and hot glue.
Comment and Subscribe,
TNTmodzINC
TNTmodzINC 2 years ago
do you have to have sandpaper? is it possible to do it without sandpaper
Bawer71 2 years ago
no it's not possible, god if you're too young to buy sand paper at a store then you shouldn't be painting stuff in the first place
OredhotchilipeppersO 2 years ago
I doubt it's that. To me it just seems kinda wrong to sandpaper what looks like unpainted plastic. Doesn't it get really scratched?
samgain1 2 years ago 2
wouldnt the paint chip/peel of, how long should it last??
badacoda 2 years ago
The answer to this question is yes all paint chips but so does paint on your house paint on your car. Due to the fact that your xbox does not usually get that much wear on the sides of your case it should last forever if your worried about it you can apply a clear coat at the end. If you throw your xbox around and are constantly rubbing it on the ground then the paint may chip and peel.
Comment and Subscribe,
TNTmodzINC
TNTmodzINC 2 years ago
...do you know if this breaks the xbox?
1androo2 2 years ago
yeaa. it doesnt... weve painted several xbox's now and never have had any proble, if you disassemble the entire thing (which means you wont be getting paint on the actual xbox/motherboard) then theres no way exterior paint can hurt the internal functioning at all
TNTmodzINC 2 years ago
won't it clog the vents? i heard you need to plug the vent holes before you paint it
ecomadness 2 years ago
no but if youre worried about that you could just take a knife and unclogg them after(i.e., stab the holes so theres an opening)
TNTmodzINC 2 years ago
yea i painted my xbox and i've had it since it came out and i've never got the red ring and its never had any problems. It looks great! :)
turtlehouse98 2 years ago
i just painted my 360 black orange and it works just fine i covered the inside with painters tape
waazup233 2 years ago
how did you cut the case?
omfgdamian1 2 years ago
with a dremel
GlobalPwnage 2 years ago
Hi!Sorry for my stupid question,but what is a dremel?My english knowledge is not the best.:)
AndrasDaroczi 2 years ago
just google it =P
GlobalPwnage 2 years ago
I did it already,but thx.
AndrasDaroczi 2 years ago
dude im doin mine with white and black stripes do you think thats too emo or maybe black and gold or somthin but thanks for the tips yo
amz310 2 years ago
you sound stupid
purp24s 2 years ago
amz: it's not emo but zebra xbox xD
kamilfreeman 2 years ago
Dude im doin mine purple with lime green detail (on all the butons and etc) i like ur design on ur cover mines just two windows...=(
xDmFxKReaMiix 2 years ago
yea check out our other vid called "xbox 360 case mod", we changed the color and you will see the final 360 with the case on it and everything
TNTmodzINC 2 years ago
what did you use to put the TNT logo on your 360
wes2006la 2 years ago
jig saw, custon stencil, and a dremmel sander to touch up the rough spots, also a drill bit to get started
TNTmodzINC 2 years ago
i did that but in black!. it did it all at the same time just a minuite ago and im going to leave it over night and see what happens. please could you make a video on how to spray paint your hard drive please!!
matthewcrissall 2 years ago
hey nice cover anyway i painted mine using white spray paint then used red stripes will it catch fire when i put it all together and play it for a while will the paint ignite when the 360 gets hot? and the metal plate in one of the covers if paint gets on that will it catch fire when the 360 is in use ?
ipodhackr 3 years ago
umm not that i know of... ha if that would happen id be shocked cuz ive never even heard of that, as long as the fans are functioning and you have your xbox in an area where it can get proper ventilation you shouldnt have to worry about that
TNTmodzINC 3 years ago
LOL IDIOT
straightshots321 3 years ago
I'd recommend waiting a while or two, (hour at minimum), let it dry, put a book or something under your 360 to let it ventilate properly, and there should be no issue, at least to my knowledge. All I can say is do your best not to get anything on anything that you had no intentions of putting on.
OwnagePlayer740 2 years ago
does the 360 still work
trmn8r4 3 years ago
yeah of course, we took the case off to avoid getting paint inside the console, but you can leave the case on as long as you tape up the holes/vents
TNTmodzINC 3 years ago
no ....
how much is it???
swatunit012 3 years ago
how much is what? the camera was like 250... maybe 300 if thats what youre talking about
TNTmodzINC 3 years ago
why is your video in HD ????
swatunit012 3 years ago
cuz its on an HD camera, is that a problem?...
TNTmodzINC 3 years ago
do i have to take off the metal plate or can i just tape over it?
owbam 3 years ago
if youre referring to the metal plate thats connected to the one side of the case, then no, leave it on, you dont even need to tape it
TNTmodzINC 3 years ago
wouldnt it get in the holes for the 360 to breeth
netdeo 3 years ago
hmmm...i dont know, usually the spray paint would go through the holes...
TNTmodzINC 3 years ago
yo im 1 of yo subscribers i have a lag swich and some time it work and some times it just discinces me off xbox rite away please send me mesig about it ty (bangjomom)
bangjomom 3 years ago
it happens, and to be honest, i cant tell you whats wrong, try a different switch, maybe a different cable, if youre cutting the orange wire, try cutting the green one instead... any of those might work
TNTmodzINC 3 years ago
Wow, I wish i could send you mine and have you paint mine for me :D
JEDM87 3 years ago
did you remove the metal part on the inside of the case?
XxCHAOSxLORDxX 3 years ago
well only one of the sides of the case is connected to the metal housing and yes we did remove that to create the window all you have to do is pull and the little plastic connections that hold it together will pull right off.
COMMENT AND SUBSCRIBE,
TNTmodzINC
TNTmodzINC 3 years ago
can you list the paint and primer you used?
swedishgorilla1 3 years ago
-Krylon Indooor/Outdoor Gloss Pumpkin Orange
-Krylon Primer, White
TNTmodzINC 3 years ago
i just did it 2day and i just used plastic paint from walmart its called fusion
400exkid95 3 years ago
okay, so i painted my case all black with the rust-o-leum thing for plastic and it turned out pretty good except that if I swipe my finger or touch it with the top of my fingernails, it just scratches and the scratch doesnt go away...
what do you recommend because you guys have a lot of experience in this but its my first time.
So if I restart, what do I need to do?
JonR47 3 years ago
first thing is sand it down really well, get off as much as you can.
after that you can basically paint like we need, try very light multiple coats...sand in between coats.
maybe try using a clear enamel as a final coat, this should provide better protection for the paint and it will make it more durable... it will also add a little shine
TNTmodzINC 3 years ago
Cool
xfrost45 3 years ago
Nice, thats orange right? Now you should probably tell us how you made that TNT sign on the other 360 part.
halojeezy 3 years ago
yea its orange um we did not create a video of how to make the TNT sign but ill make a video describing and showing instructions on how to do so....look back for updates.
Thanks,
TNTmodzINC
TNTmodzINC 3 years ago