eh its believable dyno queens do exist ive seen a 346 cbi trex cam with every bolt on u can with a fast and some afr's put down 502 threw a 9'' i mean these guys clearly knew what they where doing but it believe u can do it easly with a 383 ive heard off guys getting 605 too the flywheel with 383's on pump gas but who cares good for this dude he has 500 horse power i have 500 horse power on the bottle on just a bolt on car with a 150 shot
hey nice car ive got a 98 im building up. quick question if you dont mind. whats the gas milage like now that those mods have been done? i know most people will say you got to pay to play. its true and i understand that, but getting specs is always good research before modifications. also with the 60 pound injector did u have to do any upgrades as far as the fuel pump, fuel preasure controller or anything else i might need to know? sorry for all questions but i take my research seriously, z28
lol the sound is created by the magnaflow the power is proven by dyno or if the car just sounds beastly... this video is really quiet or the car is really quiet my old LT1 was a shit ton louder, but I will say the car looks great and according to the dyno she runs just fine ;-)
@yzman87 502 isnt unbelievable there are guys who can pump out 400-600 hp from the 3.8 that the camaro and other cars had too. Just costs a lot of money lol
@yzman87 im a mustang guy- im rebuilding my 4.6 right now... but my best friend has a 98 z28 with cold air, full exhaust headers back, he's at 350 so with h/c/i and add a 92mm TB AND 60 lbs injectors w/ the right tune i'd say its close
umm u should go check that out its the thing in the bottom of ur car that holds ur engine in place if u dont fix it it can fuck up ur hood and ur engine bad
I cant stand stupid fucking people that post on youtube and have no idea what they're writing about. There is nothing wrong with using rubber motor mounts on a camed car, it absorbs the shock from a rough idling engine. It is much more comfortable for the driver than poly and especially solid motor mounts.
do u even know wat ur talking about retard im telling the dude to get those motor mounts fix for it cant fuck up ur acting like im saying the motor mounts are used for some think else
eh its believable dyno queens do exist ive seen a 346 cbi trex cam with every bolt on u can with a fast and some afr's put down 502 threw a 9'' i mean these guys clearly knew what they where doing but it believe u can do it easly with a 383 ive heard off guys getting 605 too the flywheel with 383's on pump gas but who cares good for this dude he has 500 horse power i have 500 horse power on the bottle on just a bolt on car with a 150 shot
BrandonBnelson331 3 months ago
That things a little bit of a sleeper huh... N/A and the cam sounds pretty mild.
56oldssuper88 1 year ago
Not trying to be a hater. 402/408 barely makes that much at times. What's the set-up
bamaballa205 1 year ago
Cartek has a few 346 head/cam cars making over 500rwhp. And the new
TrckFlow heads are really nice. What cam did Rapid use? It idles really smooth.
2002blacknitews6 1 year ago
Nice car!!! Mikey does good work.
2002blacknitews6 1 year ago
What were the specs on that cam?
xZZxTakedown 1 year ago
ur car is from another planet NO ONE CAN TOUCH U
driftbuddy 2 years ago
Beautiful! Sounds amazing and I love the American racing wheels!! Ten times better than stock!!!
hondaracing1069 2 years ago
Hey where in NY are you ive Got a mildly modded 02 z28 :) Nice car btw clean!
JohnnyPappis 2 years ago
givemeyayo your fuckin retarded
playstationRLZ 2 years ago
hes special not retarted
IspooledurMom 2 years ago
hey nice car ive got a 98 im building up. quick question if you dont mind. whats the gas milage like now that those mods have been done? i know most people will say you got to pay to play. its true and i understand that, but getting specs is always good research before modifications. also with the 60 pound injector did u have to do any upgrades as far as the fuel pump, fuel preasure controller or anything else i might need to know? sorry for all questions but i take my research seriously, z28
socarrasorlando 2 years ago
Holy shit does that motor shake! Really needs new motormounts. I went with Prothane mounts on my '02 WS6.
Foozer1337 2 years ago
i dont wanna sound like a dick but i have to call bullshit on the 502 rwhp....post up the dyno sheet...I have a trans am LS1 so im not hater lol
yzman87 3 years ago
tot tot tot.
go under my username for the dyno video
vipeme1 3 years ago
holy fricken shit! nice fricken car! do you think a magnacharger would fit under there without having to do modifications?
Camaros5678 2 years ago
bullshit? listen to that fucker thats pure fucking power i deff belive its 502rwhp
joshnobles2011 3 years ago
lol the sound is created by the magnaflow the power is proven by dyno or if the car just sounds beastly... this video is really quiet or the car is really quiet my old LT1 was a shit ton louder, but I will say the car looks great and according to the dyno she runs just fine ;-)
ShinRay 3 years ago
@yzman87 502 isnt unbelievable there are guys who can pump out 400-600 hp from the 3.8 that the camaro and other cars had too. Just costs a lot of money lol
FutureMarine246 1 year ago
@yzman87 im a mustang guy- im rebuilding my 4.6 right now... but my best friend has a 98 z28 with cold air, full exhaust headers back, he's at 350 so with h/c/i and add a 92mm TB AND 60 lbs injectors w/ the right tune i'd say its close
askloglog 9 months ago
I also have a SS Camaro is it bad that my engine shakes??
Bosfootball 3 years ago
umm u should go check that out its the thing in the bottom of ur car that holds ur engine in place if u dont fix it it can fuck up ur hood and ur engine bad
GIVEMEYAYO 3 years ago
it's called rubber motor mounts dumb ass, and no their not broken
NaturallyAspiratedHP 2 years ago
i never said they were idoit i said if u dont fix it , it can fuck up ur car bad think before u write dumb bitch
GIVEMEYAYO 2 years ago
I cant stand stupid fucking people that post on youtube and have no idea what they're writing about. There is nothing wrong with using rubber motor mounts on a camed car, it absorbs the shock from a rough idling engine. It is much more comfortable for the driver than poly and especially solid motor mounts.
NaturallyAspiratedHP 2 years ago 3
do u even know wat ur talking about retard im telling the dude to get those motor mounts fix for it cant fuck up ur acting like im saying the motor mounts are used for some think else
GIVEMEYAYO 2 years ago
502rwhp n/a? the most i usually see is around 460 or so, crazy
tarquinigg 3 years ago 4
it had 460 rwtq
vipeme1 3 years ago
Awesome car
firefighter813x 3 years ago
That's some intense shit
AudiTT0022 3 years ago