Everything tasted like plastic, lol. Good thing you made a mod, while the rest of the ECIg smokers get Dioxin poisoning from plastic chemical inhalation.
Ecigs = Potentially way more damaging than cigarettes.
Why, because dumb forums claim they're not, when they have no scientific model to base their stupid claims.
You only need see the burning cartomizer post on the ecig forum to see that they're burning up and you're inhaling nothing but SHIT!
great idea! am trying to quit smoking & can't get a strong enough hit off the 7/11 carts to make it work. was wondering what you used for packing material? did you use the material out of the 7/11 carts?
they taste like plastic when you smoke them not because of the plastic casing but because the foil top of the cartridges is also coated with plastic and it stretches over the atomizer thus making it taste like plastic when you smoke
is it possible to put just water in the e-cig instead of the nicotine and inhale pure water? i was looking to use an E-Cig as a prop in a film project im working on.
They do sell 0 nicotine flavors. Water in it's self will not produce good smoke looking vapor. E-Cig's use a combination of either PG, (Propylene Glycol) or VG, (Vegetable Glycerin). or both at a 50/50 mix to create the vapor. So all in all, it will probably be best not to use straight water.
@bwstryker all youve to do's pull nicotene-glycerine pack from "cartridges", squeeze fluid on atomizer, put new "Cart" on XHale02, they work >/= to new 1! trust me, i have 6 that had died, if you want a stronger drag, use a pair of scissors/wire cutters & clip 1 or 2mm off the end that connects atomizer, prob solved. after, take slow drags into mouth til full, inhale, exhaled drag is >/= to a cig drag. recommend keeping extra set of Carts to reprime atomizer b4 changin Cart 1 packet primes 5+/-
Great video and Idea. I'd like to do something similar with my titan 510. I have a question though. Why does it have to have a screw in it? How does it vape when there is no hole at the tip of your mod? I'm guessing it might have something to do with the design of Xhale 02 model as opposed to the 510?
gaddsticks---the screw is there because there is a hole in the bottom of the metal piece...If the metal piece didn't have a hole then there would be no need for a screw...I guess the hole could be filled with metal welding material but I find the thin screw works fine. It vapes because the metal cartridge drops into the plastic mouthpiece--this e cig has a different design than the 510--the 510 has a mouthpiece and cartridge in one.
Another idea is you could probably use an empty battery case from an Xhale and make a giant mouthpiece/cart combo. You would have to rig it for airflow, and find a nice screw cap on the side of the threads of battery case where you would inhale.
I forgot to add that the thin screw was probably off an internal hard drive. I used it to replace the rounded screw on the magnetic pickup tool. This tool is basically an auto antenna with a magnet on the end. You have to pull out the smaller tubes (I used plyers) so that you just have the thickest metal tube before cutting with a hacksaw.
Great video man! I'm going to have to try that today. I never had the burnt plastic before, but I do notice the atomizer gets hot very fast. I just use the O2 for fun, I use a 510 with my piercing needle cart hack. How in the world did u come up with such a great idea?
Thanks, I was fortunate (or not depending on how you look at it) of having one of my atties die. It tasted awful, like plastic so I inspected the cartridge and noticed it had melted a bit at the top. I thought it was the cartridge so I went out to home depot searching for an object--could have been a pen top or anything--that was metal and would fit the cart. I brought the mouthpiece and plastic cartridge with me and found nothing. I stopped off at Autozone, and when I saw it, voila!
Try an empty .38 cal shell casing.
theoremaxim 1 month ago
Everything tasted like plastic, lol. Good thing you made a mod, while the rest of the ECIg smokers get Dioxin poisoning from plastic chemical inhalation.
Ecigs = Potentially way more damaging than cigarettes.
Why, because dumb forums claim they're not, when they have no scientific model to base their stupid claims.
You only need see the burning cartomizer post on the ecig forum to see that they're burning up and you're inhaling nothing but SHIT!
InTheCity3D 5 months ago
I got the x-hale hookah and e-cig from 7-11 both atomizers broke with in 48 hrs!
tipsandinfo 9 months ago
great idea! am trying to quit smoking & can't get a strong enough hit off the 7/11 carts to make it work. was wondering what you used for packing material? did you use the material out of the 7/11 carts?
slhofhnh 10 months ago
luicy sux sooo hard..lol seems like 7-11 is the only place to get the xhale 02 am i right?
hubzcaps 10 months ago
they taste like plastic when you smoke them not because of the plastic casing but because the foil top of the cartridges is also coated with plastic and it stretches over the atomizer thus making it taste like plastic when you smoke
josh1492 11 months ago
is that cotton balls
WearMyBoxers 1 year ago
what is that stuff you put in the cart? is it cotton?
sungminz 1 year ago
you put way to much time and money into that little njoy ecig mod. you shoulda just bought a 808 or 510 e-cig dude.
orthchris 1 year ago
is it possible to put just water in the e-cig instead of the nicotine and inhale pure water? i was looking to use an E-Cig as a prop in a film project im working on.
xjoshyuux 1 year ago
@xjoshyuux
They do sell 0 nicotine flavors. Water in it's self will not produce good smoke looking vapor. E-Cig's use a combination of either PG, (Propylene Glycol) or VG, (Vegetable Glycerin). or both at a 50/50 mix to create the vapor. So all in all, it will probably be best not to use straight water.
DreAdeDcoRpSE 1 year ago
i just got one of these and its pretty good. but i was wondering if its posable to use a drip tip on it.
teamkvs 1 year ago
The nic liquid was dekang vanilla 24mg nic--I believe it's 100% pg, I added the liquid, it is not the 7-11 flavoring
bwstryker 1 year ago
This has been flagged as spam show
@bwstryker all youve to do's pull nicotene-glycerine pack from "cartridges", squeeze fluid on atomizer, put new "Cart" on XHale02, they work >/= to new 1! trust me, i have 6 that had died, if you want a stronger drag, use a pair of scissors/wire cutters & clip 1 or 2mm off the end that connects atomizer, prob solved. after, take slow drags into mouth til full, inhale, exhaled drag is >/= to a cig drag. recommend keeping extra set of Carts to reprime atomizer b4 changin Cart 1 packet primes 5+/-
MrPioe 1 year ago
what flavoring brand was that? was there nicotine in it? or is it a hooka flavoring?
KlingonSpider 1 year ago
Hi bwstryker,
Great video and Idea. I'd like to do something similar with my titan 510. I have a question though. Why does it have to have a screw in it? How does it vape when there is no hole at the tip of your mod? I'm guessing it might have something to do with the design of Xhale 02 model as opposed to the 510?
Any help would be greatly appreciated.
Thanks!
gaddsticks 1 year ago
gaddsticks---the screw is there because there is a hole in the bottom of the metal piece...If the metal piece didn't have a hole then there would be no need for a screw...I guess the hole could be filled with metal welding material but I find the thin screw works fine. It vapes because the metal cartridge drops into the plastic mouthpiece--this e cig has a different design than the 510--the 510 has a mouthpiece and cartridge in one.
bwstryker 1 year ago
Another idea is you could probably use an empty battery case from an Xhale and make a giant mouthpiece/cart combo. You would have to rig it for airflow, and find a nice screw cap on the side of the threads of battery case where you would inhale.
bwstryker 1 year ago
I forgot to add that the thin screw was probably off an internal hard drive. I used it to replace the rounded screw on the magnetic pickup tool. This tool is basically an auto antenna with a magnet on the end. You have to pull out the smaller tubes (I used plyers) so that you just have the thickest metal tube before cutting with a hacksaw.
bwstryker 1 year ago
Great video man! I'm going to have to try that today. I never had the burnt plastic before, but I do notice the atomizer gets hot very fast. I just use the O2 for fun, I use a 510 with my piercing needle cart hack. How in the world did u come up with such a great idea?
mulishafmxxx 1 year ago
Thanks, I was fortunate (or not depending on how you look at it) of having one of my atties die. It tasted awful, like plastic so I inspected the cartridge and noticed it had melted a bit at the top. I thought it was the cartridge so I went out to home depot searching for an object--could have been a pen top or anything--that was metal and would fit the cart. I brought the mouthpiece and plastic cartridge with me and found nothing. I stopped off at Autozone, and when I saw it, voila!
bwstryker 1 year ago