Added: 3 years ago
From: CrazySkorpion64
Views: 274,814
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (246)

Sign In or Sign Up now to post a comment!
  • bullshit...

  • no final o cara ainda rumou a cbeça na quina da coluna do carro para entrarkkkkkkkkkkk

  • gay.

  • 4 speed gearbox 

  • sorry but this car is rear engine it steped across a bit when they got out with it still running in gear

  • Total rubbish do I need to say more

  • like a boss

  • niezłe jaja tylko ze wyjmowali pół osie i oleju nie nalali do skrzyni. Dobrzy są :)

  • Someone gets crushed at 1:21 ...

  • @Simboiss LOL that british yell

  • @Converse347

    Agreed smaller engine in the back the bonnet also wasn't attached properly no fuel lines, coolant and there is no way the guy underneth got all the mounts hooked up or the driveshafts that quick there just simple wouldn't be enough space to remove/insert the driveshafts without at least popping the wishbone out the bottom of the strut first.

    Well put together vid but to someone with the slightest knowledge of engine removal its too obvious this is bs

  • 1:32 haha

  • Do people actually realise what a car needs to drive a few feet? I.e. The fuel in the carb/line alone would do this. A welded diff would allow just one shaft to be fitted and all that would have to be is a quick release item that's pinned together. An exhaust system and radiator is NOT required for such a short stint. Engine doesn't need to be bolted up, it could easily hang on an adapted mount. It's 100% real IMO and certainly very doable.

  • Too much wiring in modern day cars.

    Anyways BRITS are the Kings of engines.

  • there is NO reason it should take a shop longer than 2 weeks...

  • @converse437 your right as they removed the engine and box but no drive shafts now you have to pop them out to take out the gear box it's just a spoof

  • Yeeaah right!

  • wouldnt go far without the radiator hooked up

  • Explain to me how tou remove the half shafts without separating the ball joints. Smell a bunch of bull shit here

  • I'm thinking there was a little engine mounted in the back to make this seem real. Seeing as how the car revved drastically to scoot a little forward it's probably a smaller ~250cc engine in the back. The "engine swap" was probably them setting the decoy on some kind of mount, reattaching the hood, and proceeding to "win" a world record. Ford engines in that model have three motor mounts, they never appeared to attach the fuel line or a throttle cable, etc. But this would be cool to a nimwit

  • @converse347 forsure hahaha

    

  • @converse347 ya your probly right there.

  • @converse347 I agree

  • these people are from the hood

  • lol looks good, bt since i build these from scratch every day, i dont think anyones gunner be doing it in 42 seconds. admitidly it only takes about half hour out and half hour in, in the real world.

  • try it with a new car from 2012, you need 42hours^^

  • @JMVvideosByDjMarty did you see the one guy drag the other guy out from under lol

  • What the hell? No way.

  • I didn't see exhaust bolted in and the cv joints weren't put in or out

  • Bullshit.. no really. I owned mk3 few years ago and i know hom much work are there. in 42sec they could only screw out each one 1 bolt. but briveshafts, etc.. no way!

  • This is why england needed our help in the great war. they're useless scam artists and europe had enough of their cattle shit.

  • fuck this

  • Yea, there are only a few ways this could happen, 1. Would either have to be air cooled, or run and installed without coolent. 2. Breakerpoint system or a totally contained ignition system within the distributor. 3. The most oiled and cleanest exaust manifold to exaust pipe threads EVER. People mention driveshafts (or sometimes called half-shaft for FWD cars), ehh, if designed really well they can just slip in with no problem. But yea, there was prep done for 42 seconds.

  • 1:29-The guy under the hood just goes flying

  • lol, wtf funny how they remove drive shafts from gearbox SO fast then lift assembly from engine without ANY oil leaking from gearbox let alone the multitude of wiring to engine ancilliarys. ETC ETC ETC

  • fake and gay

  • set up for dem

  • will it last many years?

  • Fucking stupid try changing one out for real..

  • Load of rubbish.

  • If only car all car engines could be swapped and changed this easily.

  • Fake, shit, stupid, lol

  • holly MOG!

  • Bull cr*p!!

  • .yes cuz my hood is just going to come right off.

  • Hi, i've got a ford escort from 98, i'd like to learn how to do this. Thanks in advance.

  • I'd be funny if he stalled the car..

  • LOL what a load of old bollocks!

  • Comment removed

  • Most of the time consuming stuff was already done...like all the countless bolts etc.

  • Sooooooooooooooooo, you can get better than a kwikfit fitter, there not the ones to trust, lying bastards

  • lol 1985 mark 2 foed escort. they are a painto work on. never heard of a quick release engine tho

  • @lea1mercian A pain to work on ??? jesus take me back to when cars were this easy to work on! Fck if ya think a 1985 excort is a compicated car to work on you should walk away from car repairs completely

  • @MonkeyHunch well when they are that old u think its as easy to work on as a new one? yeah they are simple to work on dip sit never said tehy was complicated so re read again fuckwit. I said a pain so stop being a YT tard

  • @lea1mercian pain

    Noun:

    Physical suffering or discomfort caused by illness or injury.

    Verb:

    Cause mental or physical pain to: "it pains me to say this".

    Synonyms:

    noun. ache - grief - misery - suffering - affliction - anguish

    verb.  hurt - ache - grieve - ail - afflict - distress - smart

    Sounds more than complicated to me ;)

  • @MonkeyHunch you sir are a TOOL, stop being a YT troll.

  • Ford's slide off hoods are some amazing technology.

  • lol engines in the back the front looks liek a dummy hehe

  • Theres an engine in the boot.

  • stupid people film this stupid film for stupid youtube users.

  • Comment removed

  • I didn't know the hood was that easy to take off ;) so fucking fake. people were easier to fool in the 80's I guess.

  • @Adler556

    Not at all. People today are even easier to fool. Look at all the very obviously faked crap you can find on youtube and people think it's real.

    There's the famous bouncing plane from a Dutch beer commercial. Somebody wrote "Chinese plane landing" and millions think a plane can actually jump like some pimp mobile while landing.

    Today, with so much information being readily avaiable people are dumber than ever, which is ironic.

  • id like to see this car go more than 10 metres without falling apart with an engine swap that fast.....

  • Nothing was bolted? Engine hooks were already on it? This was a speed oriented run as opposed to an actual engine swap.

  • My word, I had the exact model, and I don't remember the ride quite so jelly like lol

  • fake the bolts was not even in the motor monts all thay did was fit it and put it bak in lol

  • yeh i can swap a train engine on my own in around 5 months.

  • jó re ez korán sem egy átlag autó hanem direkt erre a mutatványra átalakított !!!!!!!!!!!!!!!!!!!!!!!!!!!

  • If i don`t remenber wrong,a car club in Finland swapped VW Bug engine in 32 sec,in same rules.? In early -80`s.

  • Fastest may for Royal Marines to change engine: C4

  • @iCHARRLZ fastest way for US marines: get another one from the Army. lol semper fi

  • so funny, when the engine was done, one guy grabbed the guy underneath by the legs and pulled him out, it really looked like a dummy came out from under there, he really just swung out like a rag doll.

  • fake as hell :P

  • holy shit i thought the guy underniegh was yelling cause he was being crushed

  • @wtl1964 same haha

  • It's not fake it's real

  • @teddy22111 Yeah, but there was a lot of cheating to do it, none of the coolant pipes were connected, the bonnet wasn't even fixed to the car as it should be it was rigged to come right off when the bonnet catch was released, so they didn't have to unbolt the bonnet. It was rigged deliberately. It wasn't a proper engine swap.

  • Heck yeah this is fake but what's even stupider is that dumbass under the car while their putting in an engine! smh

  • you people know nothing about cars its a mk3 escort 1.3 single carb 1 fuel line 2 wires on the starter put the drive shafts in bolt it to the sub frame job done!!!!!!!

  • @teddy22111 You forgot the the radiator. Unless mk3 escort had air cooling, oh yeah dont forget drive shafts. lol

  • @mikester1290 drive shafts? gaters circlips fuel starter motor cable its just fun manno one takes this seriously but just imagine a woman driver turnig up at yout garage asking how long to change my engine the Royal Marines did it in 42 second!!!!!! i got "proof" its on U tube!!!!!

  • motor was placed in the rear to actually drive the car

  • @kemardrakes yeah you can see the rear camber is redic... the front is way too high even with an engine in it!

  • People are so stupid. Its obv a real engine change they started the car before and after. It doesn't have to be more complicated than that. They removed all the parts that would take an age to fit and re fit. Its a genuine record else guinness wouldn't verify it!

  • fake and gay

  • What a scam. It´s simply impossible to do a real engine change so fast

  • probably a one off Escort with a motor in the trunk

  • fake

  • fking BS, that engine was sitting In that car mounts not connected and fk all else except prob 1 wire to get power to the starter, fuel is coming from just whats in the engine cuz the petrol pump/pipes surley were not connected and the 101 other things that need to be done.

    You can not use the REAL engine change time as a record to break as that was NOT a real engine change.

    There marines for fk sake it should be a REAL engine change they'd prob break record anyway

  • lets guess what they do for a living now

  • May not be a "legit" engine swap, but with all the ancillaries a modern car has and the technique these guys developed, we could probably get an engine swap down to a 15 minute job.

  • fixed^^

    

  • Even the bonnet isn't fixed on properly!

  • Great video! its clearly been engineered to be lifted out and another dropped straight in but who cares its abit of fun! x

  • I know you don't see bolts being undone ect. The point is to remove the engine,replace it and connect the parts so it's can pass a mark a few yards in front. If they had to undo bolts ect, it may have took them a few minutes extra. The 'mechanics on here saying it's much harder and not real' are probably talking about the 'real time' it takes to change an engine. Oil,filter change and bit of tutting and off to the toilet for a crafty fag. The point was made. It can be done!

  • @sussbox it cant be done.. there are so many things to do and double check before a car is safe to go out on the road after an engine swap..

  • AND TO THINK MY MECHANIC WANTED AN HOUR TO DO MY ENGINE SWAP!!! HE OBVIOUSLY DOESN'T KNOW WHAT HE'S TALKING ABOUT

  • :P Yeah, that wasn't a real engine change. No intake manifold removal? Exhaust manifold removal? Engine mounts? Air filter assembly? etc etc etc?

  • didnt undo or do up any mounting bolts.... or exhaust manifold

  • good olde kent engine

  • to spinless bastard,its obvious its rigged,rules or no rules,are you mehanic?a proper engine change involves a whole lot more work,you drive that car 1 mile down the rd and i garentee it fucks up.

  • Warning: if you are looking for a used motor do not buy from Engine and Transmission World located in Cudahy, Wi. Owners: Mark Dobrenko and Allen Simmons two scum bags. Google Engine and Transmission World and read about all the people they have scammed. They send out a defective motor that will not run knowing you will return it but then they charge a 25% restocking fee then turn around and sell the piece of junk to the next poor fool. BEWARE !!! These guys are crooks.

  • @gotyourtongue thank you! im in oak creek...

  • It takes me longer to brush my teeth.

  • Yeh its easy when you don't worry about motor mounts, theres a reason why it takes me 5 hours for a swap.

  • It was maybe originally a rwd but they made it seem like a fwd

  • total garbage,there is no way that is posibble,that car has derfinatly been rigged.

  • @zeberdeeeeeeeeeee how is it rigged ,they are simply following the rules set down by guinness world records !

  • hmmm,no mounts,no coolant,shouldve made them drive it to scotland,dont open a shop,youd have way to many comebacks

  • Roy Castle, legend !

  • can you do this to my 4runner?xD

  • There's no fucking way.. How'd they disconnect and reconnect the axles? Fuel lines? Oil in the transmission? That fucking motor isn't air cooled I'm sure? Not a real swap.

  • @red97rum I agree with you except the bit about the trans fluid.It looked like they did an engine and trans swap. BTW it was so funny at 1:29 when they pulled the guy out from under the car.

  • @red97rum You obviously know nothing about engines...

  • @Kelby90 And you're obviously a naive toolbag that thinks he does know something about engines. So kindly reinsert the the dick into your kool aide drinking mouth and stfu. ;)

  • @red97rum Actually if you notice transmission is a part of the switched engine lol

  • @valdomad True. But if you've ever pulled an axle out of a transmission out comes the gear oil... I didn't notice them add fluid to the transmission or anything for that matter.

  • @red97rum You don't need fluid to drive a few meters. You can see them attaching the fuel line and electrics.

  • Comment removed

  • There's no fucking way.. How'd they disconnect and reconnect the axles? Fuel lines? Oil in the transmission? That fucking motor isn't air cooled I'm sure? Not a real swap.

  • wicked, they should open a garage!

  • tats the best thing about a ford

  • What a load of farking garbagen no go back and do it as a single person using all the normal tools with the bonnet attached.

  • thats preatty fucking fast. although it was a messy job but its well understood. because of lack of time

  • The bonnet wasnt even bolted on, and the engine was already loose. lol

  • now do it with a v8

  • Why aren't all cars designed like this then?? :)

  • That is a pile of crap as you can see the engine was already setup for removal. 

  • @InATrance4Life For super duper quick removal that is lol

  • @InATrance4Life

    How would that even work in 42 minutes let alone in 42 seconds, even if that were the case? I'm not a mechanic, and don't know anything about changing out an engine, but WTF.

  • ......

  • bulshit..

    

  • The vehicle details for B897 XNO are: Date of Liability 01 08 1995 Date of First Registration 10 10 1984 Year of Manufacture 1984 Cylinder Capacity (cc) 1117CC CO2 Emissions Not Available Fuel Type Petrol Export Marker Not Applicable Vehicle Status Unlicensed Vehicle Colour WHITE
  • 80s top gear. I noticed and the brits had bad teeth still so it'd have to be before they could cg good teeth on people.

  • yes this is total bs . the car has been modified to do this. That looks like a front wheel drive transaxle, Connecting the cv axles and engine mounts would take much longer than that unless they have been modified. Electrical connections would have to be modified to quick connect and so on.

  • good teamwork 1:29

  • Chuck norris does it in 41 seconds with no tools what so ever.

  • @bpl0807 dude enough qwith the gay chuck norris jokes they are getting retarted

  • Technically they changed the engine in 34 secs!

    lol at 1:30 dragging that guy from underneath the car

  • its called 42 second engine change so when i saw the time was 1:56 i knew you wer going to be waisting 1:14 of my life....

  • Wax on, wax off. Engine in, engine out.

  • this is so dumb... they obviously had a hole on the bottom of the car so they can pedal it like the flinstones! lmfao

  • no changing of air filters> coolant> power steering? all these i didnt see that engine is running bare essentials and would only run for maby 5 min till it overheated and siezed

  • @Jashomartin lol i notice that right away

  • i could do that with one finger

  • i could do that with one finger

  • That is the gayest crap I've ever seen. Try doing that with a car that's driven all the time, dirty, bolts not already loosened (lol), so on and so forth...

  • lol,their hands are the tools....unscrewed nuts and bolts so damn fast...

  • so the hood just pops off -__-

  • @Hugo350R its a ford escort.... bits just pop off all the time ;)

  • haha at the end, the guy missing teeth must be the guy under the engine and they missed once or twice!

  • pretty obvious one guy made the engine noise while the rest filtstoned it

    

  • is this an episode of top gear from the middle of the twentieth century?? holy shit the dude looks so young

  • Go and look for "VW Beetle Engine change Guiness world record ". It's a real engine change and a real car.

  • If only they were that fast in the Falkland Islands 1982 ;-)

  • Biggest load of shit I've ever seen.

  • lick my left nuttt

  • Yea, what happened to the axles and the harness and fuel line??? There is something odd about the swap... Of course this car isn't ready to smog and such but for a competition, whatever. I'd like to see them try that on an 89 P.O.S. Taurus off the street

  • is this FAST GEAR or how they call this show?

  • meth is a hell of a drug

  • lol i wanna see em lift a v8 instead of that little 1.3 liter engine

  • Impressive? yes. legitimate? Not sure. I would believe it if they showed the car moving(under it's own power) before they started the clock. Just seems like it was easier to pull out than put in.

  • leave it up to the british to do something that gay

  • i bet you couldnt change gear

  • can you do this with my 240 shell and a sr20det?

  • I, call, sweet, bullshit.

  • haha,stop joking. were the axles, engine harness even connected haha?

  • fake.

  • gay

  • fucking stupid complete bullshit