looks Good ! So you are using plates inside the cell. You are using the relay to keep the switch from over load it looks like. Am thinking that you are pulling power from the battery.
Is this your only video on the car. Could not find the other!
Could I sugest placing a relay on the tank that will start the process with the twin cell active, and then break the circuit with the twin at 30amps, and comes back on at 15amps?
Very true, I've been trying to keep up with all your additions, and I've been especially interested in your pulse design, I've personally seen few syetems running on about 12v and .5amps at about 50kHz generating a considerable amount of hydroxy, not to say that you haven't already gotten some great results. Keep up the great work!
The twin AAron's Cell is to get past the "runaway" caused by over heating of the cell;at this point it is working. No the car is not running all Hydrogen (not yet).... John AArons
I have (now) two band saws... one of them is set up just to cut 3" plates ... the other to cut other parts I use. I am getting ready to get one more. Thanks for the question. John AArons
I don't under stand"or do you need it.Looking Good"; but my answer is ... yes.. the only reason its is not there is not because it need to look good, but the price. It seems everything takes money...John AArons
I think what he was asking was just if you needed it, then ended his comment by telling you that everything's 'looking good'. And by the looks of it you are obviously very knowledgeable when it comes to HHO and converting your Honda. I just started making hydro cells last weekend (almost done with my first one) and your videos have played a big role in getting me started. Keep up the great work!
i became doing my hydrogen cells and i want to know how i drop my amps,i have a 8 plates but my battery is 60 amps how i drop to 15 amps
brisolaslip 3 years ago
you need to add a hho collection tank for the auxiliary fuel when you make the larger cell
mekosemail 4 years ago
At this time ... you need more hydrogen than these cell produce.... I am working on a bigger unit... John AArons
johnaarons 4 years ago
Hydrogen and gas... John AArons
johnaarons 4 years ago
looks Good ! So you are using plates inside the cell. You are using the relay to keep the switch from over load it looks like. Am thinking that you are pulling power from the battery.
Is this your only video on the car. Could not find the other!
youngsinfo 4 years ago
There are about 3 videos...go to my site "hydrogentap dot com"... you can see the cell.John AArons
johnaarons 4 years ago
Could I sugest placing a relay on the tank that will start the process with the twin cell active, and then break the circuit with the twin at 30amps, and comes back on at 15amps?
Laszlo1985 4 years ago
I did just that.... but an electronic system would be better. John AArons
johnaarons 4 years ago
Very true, I've been trying to keep up with all your additions, and I've been especially interested in your pulse design, I've personally seen few syetems running on about 12v and .5amps at about 50kHz generating a considerable amount of hydroxy, not to say that you haven't already gotten some great results. Keep up the great work!
Laszlo1985 4 years ago
Great job! Thank you for doing this for us!
Have you noticed any improvement of the engine characteristics when the cell is on?
niram2 4 years ago
There is no question that the engine works better with Hydrogen...
johnaarons 4 years ago
JOHN:
VERY EXCITING!! So with the 2 twins, is it running strictly on hydrogen?
BobbyG
bobbypatty1 4 years ago
The twin AAron's Cell is to get past the "runaway" caused by over heating of the cell;at this point it is working. No the car is not running all Hydrogen (not yet).... John AArons
johnaarons 4 years ago
Hi John, Do you cut your plates yourself, if so what do you use to cut them? (if you domt mind sharing) Thanks.
Greasy01 4 years ago
I have (now) two band saws... one of them is set up just to cut 3" plates ... the other to cut other parts I use. I am getting ready to get one more. Thanks for the question. John AArons
johnaarons 4 years ago
Hello John,Aways great job.will you have a temp gauge on you cell? or do you need it.Looking Good
czarwright 4 years ago
I don't under stand"or do you need it.Looking Good"; but my answer is ... yes.. the only reason its is not there is not because it need to look good, but the price. It seems everything takes money...John AArons
johnaarons 4 years ago
I think what viewers are asking themselves is if you have a temperature gauge on your cell itself and maybe on your engine too?
hoekf 4 years ago
I think what he was asking was just if you needed it, then ended his comment by telling you that everything's 'looking good'. And by the looks of it you are obviously very knowledgeable when it comes to HHO and converting your Honda. I just started making hydro cells last weekend (almost done with my first one) and your videos have played a big role in getting me started. Keep up the great work!
ganjamonk 4 years ago
Thanks...If I can get more people interested in this .... thats great... John AArons
johnaarons 4 years ago