Added: 4 years ago
From: TTSoarer91
Views: 20,582
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (55)

Sign In or Sign Up now to post a comment!
  • Hard bro fully hard yeah

  • suck it hard more like you aussie fag

  • Dan you are the biggest inspiration to most Soarer owners. You are an awesome bloke with an awesome car, always willing to help out anyone with questions like myself.

    I better beat your time with my 2JZ Swap in my Soarer.

    Guys the people questioning his truthness with what his done with mods to get 11.8. I can back up Dan and say everything he states is fact and there is no other hidden secrets. Its all in the driver the right mods, knowing your car. And he knows how to launch.

  • You dont need over 300+rwkw to run 11's . Whoever told you that is incorrect . My car made 260 and has since run 11.80 @ 116.1mph with a Slingshot convertor in it . Car now has just over 200,000km on it now .

    Mods are . FMIC , UAS Dumps into twin exhaust , Blitz Access ECU , Stage 1 shift kit + Slingshot convertor , Adj Cam gear , LSD , EBC .

    Still running the stock BOV which many have said is letting me down and holding back @ high boost . Its my daily .

  • YEH BRO.....FULLY GAY!

  • It ended up making 261rwkw after we found a boost leak on the dyno , explains why it runs 11.8 , but has since gone 116.1mph . I have since fitted a stall convertor but struggled with traction, running slower 60 footers but still ran 11.8 @ 116+mph .

  • @TTSoarer91 so what mods do you have to get 313rwkw because that is wats needed to push a 1.6T soarer down a 1/4mile @ 11.8sec?

  • @xm4tr1x

    I am not sure how you got 313 rwkw as a figure needed to get an 11 in a 1.6 T Soarer.

    I got 12.4@113mph myself in a full weight Soarer on treaded street tyres. I dynoed 259RWKW on 17psi with the stock engine, turbos and Gearbox, I have a 1996 Soarer GTTL a bit heavier than this Soarer in the vid. If I stripped out some interior added another 1-2psi boost, and got some MT Drag Radials. With a good laucnch there is no reason why I couldn't of got close to the 11's minimum.

  • So extras that you have are cam gears I am guessing? Bigger tyers on the rear (Mine are 255x18), LSD.... Trying to think, anything else? Any suspension mods? I have adjustable coil overs front and rear.

  • Nice, I have stalled on my mods for a little while now. But I am at 16.5 psi on my stock ceramics and have been for almosst a year no issues. I am getting 233rwkw which is about 5 less than you were making, it made 580nm also on a Dyno Dynamics Dyno. (SOUTHERN HIGH TECH)

    MV stage 1 shift kit

    Twin 12" thermo fans

    Iridium plugs

    Pod filter

    Pod heat shield

    600x300x70 FMIC

    Stainless 2.5" dump pipes into 3" race pipe splitting into twin 2.5" pipes with twin cannons on the rear.

    SAFC

  • what else is done

  • what else did u do toit

  • so what mods do you, how did get ur car to run 11s, i doing the 1jz swap from a soarer

  • what mods do you have, nice run

  • Very amazing performance, well done

  • I am Running R154,

  • my ride in on the road, 1jzgte in a KE-70R...

    Any tip in making it faster would be very helpfull and will be thankfull for that..

    Currently I am running

    downpipes.

    3" straight piping,

    F-series diff. 3.73:1, LSD

    .7 bar boost!!

    Thanks in advance

  • Shit my turbos must have been a bit worn wound it to 18 psi went sick for about half n hour then turned then to dust steelies here i come

  • the diff. ratio is 3.73:1 in soarer ?

    what kind of intake you are running!!

  • Stock Engine, Stock intake, Stock throttle body .

    The factory ratio in the TT is 4.09, so basically 4.1 ratio in the rear end . The V8 came out with the longer 3.7 you speak of .

  • lol.that was funny,the dude runnin n tellin the little mx5 yo bro its the v8's runnin get out the way!

  • Actually the Mx5 blew its diff . And were in the 4's , 6's and rotaries lanes . We dont get to run the v8's, lucky for them :D

  • so what do I have to do to my twin turbo soarer to get those times?

  • Bit of research and keep on racing :)

  • i dont see anything about a stock auto soarer tranny in the post, it doesnt sound like one when its doing a burnout or going down the track, it sounds like a th400

  • Its running the Stock 4 speed a340 gearbox with a Stage 1 MV automatics shift kit . Still running the stock convertor . I will be upgrading the convertor to a 2800/3000 stally in the next couple of months.

  • what tyres did u have fitted for that run?

  • MT Et Street Radials 255/50/16's with about 15psi

  • Good one mate. You can hear what type of transmission it runs by the sound can you? Obviously not....

    Nice launch BTW Dtrain. What 60 foot did you do again? I'm not sure the bigger stall is going to help you a huge deal since your launch is already pretty spot on with the stock converter and turbos.

  • Its running a stock 1JZ motor and stock 1jz turbos. Still 2.5L capacity .

  • i has a supra motor.

  • wow that is realy fast for a stock soarer , theirs gota be something done to it?

  • impressive

  • Hey Dan. Nice run. Just wondering if there is any chance that steelies were put in, in Japan before you purchased the car because 18 psi is huge for ceramics. If not 18 psi here i come.

  • Nope they are stockies, I checked them over when i pulled them off to change the dump pipes :) Still going strongly and this run was done 18 mths ago .

  • D-Train, my car has a pod filter and 11 fuel pumps, do you think I could remove my headlight and run a 14?

  • Haha Morgs..... You can even run on 1 turbo and run 14's no probs !

  • Bro ur reaction time was a bit slow you will get lower sec's next time u go with faster reaction time GL :)

  • Lol, I think you need to learn about drag racing... The reaction time is has nothing to do with the ET itself. Its only a measure of the time taken between the Green light and the time your front wheel breaks the beam!

    And it wasnt bracket racing, so the RT didnt matter... What did, was the ET + mph :)

  • Hey man I was just wondering, what did you do to your soarer to get it going so fast? I just got a 91 twin turbo soarer but it doesnt run 11.8 lol

  • That Soarer is quick, especially off the line! Very nice.

  • Awesome run mate, well done for fuck all mods

  • Hey man, check my vids. Nice run! Can you tell me what other mods you have done? Just curious. I am just installing a AVCR boost controller, and a wideband. Just curious what you did. Could I boost 18 psi safely?

  • If you like the smell of ceramic dust, you can boost to 18psi. Stock turbos wont handle anything much more than stock boost (anywhere up to 14psi is about it) and still be reliable. Have them set on about 12psi, you'll notice a reasonable improvement from stock.

  • are the the orrigonal wheels u hat the MTs on ?

  • Yeah they are :) 16x7 stock TT rims with 255/50/16 MT Et STreet Radials.

  • its my fav car... what is the prize?

  • NO prize, just proved that it could go 11's, when everyone said it couldnt be done!

  • HOLY SHIT! daniel clarke? owner of the fastest stock twin turbo soarer in the world! id just like to say congrats on the time and also like to thank u for giving me the inspiration to modify my 92 soarer gtt ive only just upgraded the injectors and fuel pump got a greddy adjustable cam gear on order from my local super cheap auto :D and im hoping not to stop there either ive mainly done visual stuff to mine undercar neons incar neons but man thx for the inspiration ur a legend among gtt owners

  • Awsome dude, Thanks :) Get some vids up of your ridesomewhere so we can check it out..

    Seeya on the flip side.

  • well done dan

    i just finished reading zoom!

    just wanted to pop in n say congrats.

    i to drive a jzz30, teach me how to launch... please, pretty please

  • nice vid mate! i have a 91 soarer tt and was just wondering what boost you running? also are the stock turbos rebuilt or have they been steel wheeled? im about to fit my exhaust and rebuild my turbos( been told that after rebuild i can run up to 16/17 psi)plus all the extras i.e fmic,intake,computer,shift kit etc. Looking at getting around 230kw or there abouts. Which issue of zoom are you expecting? love to shit on V8s and other turbos with a sleeper soarer.LONG LIVE THE SC300!!!

  • IM running 18psi at the moment, and they ARE stock ceramic turbos!

    Zoom Magazine issue # 123 :)

  • Mad bro, how can i fit one of those in my 75 corona mk2.

    "smoke it hard bro" LoL

  • Thats actually My brother, and he is as Aussie as it comes!!!

    He was puttin it all on bein a funny bastard... As ya do,lol!

  • And thanks man, it goes alright aye.. Thanks for lookin! Will be featured in Zoom magazine coming up in the next few months, keep an eye out :)

    Cheers!

  • what are the mods and how much boost?

  • Ahh nice.. Where are you located?

  • will have one posted shortly.Just putting new carbon bodykit on at the moment. Tryingto locate carbon wings(fenders) at the moment...so hard to find

    cheers bud

    mark.

  • Big Respect bud...I have an ultra quick Soarer running low 11's.Excellent vid

    Regards

    Mark

  • Awsome mate, You got a vid or link for us to view????

    Had to get my Super STreet licence so will run it at a prepped track and see if it goes any better as it is.

  • Ceramic set up!!!? Good effort bro, perfect launch too, mods to the auto.........?

  • Standard Box with a Mv Automatics Stage 1 shift kit. STandard stally too.

    Might see an 11.7 out of it next time out. It should run a high 1.5 sixty footer on a prepped track.

  • crazy bro, cost effective weapon

  • Running Mickey Thompson ET STreet Radials 255/50/16's.

  • Impressive whats the spec list??

    What tyres where you running on the stock wheels???

  • great time man im running 16psi through my turbos will this be ok with intake, exhaust an front mount intercooler and fcd

  • 18.5psi and have been pushing 18+ psi through them for almost 12 months... It made 320rwhp on a Dyno Dynamics dyno @ 17psi on 98 octane pump fuel.

  • Wow, how much rwhp & boost did those ceramic turbos handle for that 11.8 run. 1Js are the s@@t!

  • Yes standard ceramic turbos.

  • stock as in ceramic stock turbines!?

  • Looking good bloke, time for gas now :D

  • Congrats 'D Train' you big poof.

    I'm feeling a shit load less sick today so if it doesn't rain chances are I'll be going to Calder tonight trying to chase your time.

    I've had my fingers crossed since mid last week :P

  • Who knows what the future may hold:) But im hoping to go 1 tenth at a time:)

  • Awsome stuff Dan! Can we see a 11.5?

  • nice vid. congrats mate :)

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more