For the cam, how mild is "mild". I am building a very similar motor with a 214/218 duration cam with a 112 lobe sep. Curious to see what my combo might do.
Okay. I'll be using GLMs and stock risers which is why my cam specs are so mild. The motor will burn 93 octane because my cam will give a decent dynamic compression ratio (8.2). I won't get 490 hp...hoping for 415-420.
Yep, #1034 AFR Eliminator 195`s w/65cc chambers, tried a 850 carb on dyno was 488hp but low end torque dropped off, so 650 carb was just right for this one.
For the cam, how mild is "mild". I am building a very similar motor with a 214/218 duration cam with a 112 lobe sep. Curious to see what my combo might do.
SlappyHuck 2 years ago
Crane Cams # 119701 specs 222/230 112 lobe sep lift .552"/.575" w/1.6:1 rocker arms.
srs24 2 years ago
Cool, thanks. Did you have to use aftermarket manifolds?
SlappyHuck 2 years ago
Yes, Stainless Marine.
srs24 2 years ago
Okay. I'll be using GLMs and stock risers which is why my cam specs are so mild. The motor will burn 93 octane because my cam will give a decent dynamic compression ratio (8.2). I won't get 490 hp...hoping for 415-420.
SlappyHuck 2 years ago
Yep, #1034 AFR Eliminator 195`s w/65cc chambers, tried a 850 carb on dyno was 488hp but low end torque dropped off, so 650 carb was just right for this one.
srs24 3 years ago
Thats impressive. And just 9.6:1 comp and a 650 carb. Those AFR 195's, are they the new ones that flow 300 cfm?
madtownmadman 3 years ago