How to paint your paintball marker tiger stripe camouflage 2 of 2

[yacobucc1]

20 bucks said overspray went all over that bed.

[Patrickpaintball24]

Wat do I have to plug on my x7

[milkshakebubbley]

@Patrickpaintball24 You might want to take it apart and simply paint the two halves. Then you can tape over some of the insides and stuff.

[paintballingguy]

@Patrickpaintball24 Anything you don't want paint in.

[BoomToThePowerofBoom]

If you want it to last longer, sand in between coats lightly... and painting should be done outside on a sunny day so the paint can stick better with the sun light. That's if you don't want your room to stink up, opening the window can only do so much LOL

[pedercarlson]

are youd ing this on your bed?!?!

[G48E1iT3]

can I paint my electronic gun ?

Does the paint broke or affect the electronic of the guns ?

thanks !

[metaldrummer71]

ya i made a ghilly suit in my basement and used alot od spray paint and dyes ya that dident work out to good

[Alfonsov909]

does the paintball marker feel any different with the paint on it, and will the paint start to peal off or does it stay on good????

[Alfonsov909]

does the gun feel any different with the paint on it, and will the paint start to peal off or does it stay on good????

[drewsky1996]

could i send you my gun to paint???

[xHUMANFRIDGEx]

nice tatys man :)

[faraty2]

is this a trilogy

[paintballingguy]

@faraty2 Yup. With hitmen pump kit.

[DemoncChivas]

do you have any idea how to do this on a marker with an aluminum body?

[paintballingguy]

@DemoncChivas This is an aluminum marker. Most of the new ones are.. Just make sure you read your paints can, it should say a list of acceptable materials. If you want to use paint that doesn't list metal or aluminum I suggest don't.

[walkthroughguy88]

also when your painting your tiger stripes do you have to let it dry between each color

[paintballingguy]

@walkthroughguy88 Yes, Always let it dry between coats and colors at least 10 - 15 mins..

[walkthroughguy88]

do you have to paint your gun black if its already black

[paintballingguy]

@walkthroughguy88 No but it's tough to match different paint types, so it's better to paint your base color with the same paint you use for the stripe. That way it all looks uniform.

[William1996ish]

can u show how u did ur a5 tiger stripe

[jigglyfam]

How come you didnt do it outside??

[paintballingguy]

@jigglyfam raining outside.

[TheDirtBikeMan17]

i was wondering kind of paint to use for this

[GregoryLeclercq]

@TheDirtBikeMan17 walmart and canadian tire have krylon paint that is camo colours and designed to reflect light

[Freestylematt139]

How close together do you do the tiger stripes? Cuz i don't want to do them to close and it be fucked when I go to do the second offset color. Thanks

[rybhugo]

I painted my TM-15 red tiger, thanks to this video! ^^

[angrymuffin123]

do u have to paint it black if ur gun is already black?

[HOTTPOKKETT]

damn you talk alot...

[jjd]

that's awesome!!

[23Trainer]

great video man ! quick question though would it be better if u took ur gun apart and painted piece my piece cuz i wanna paint my ion

[paintballingguy]

Well yes and no, It would be better cause you wouldn't have to mask off the aras you don't want paint to get in to, You would just remove them.

But it would be almost impossible to match the pattern up if you paint it in pieces.

[SirusTheVirus101101]

will the paint cause the trigger mechanism to get sticky?

[paintballingguy]

sticky? no, it might stick it together.. but not sticky. once you pull the trigger a few times it would break off and would be fine. But I suggest tape to cover it..

[Blickhead12]

can u tell me what paint u used, and does it stay on and is scratch resietent

[paintballingguy]

It is quite scratch resistant, if you have a polished finish you'll want to use a fine sandpaper or scotchbright to give the paint a good texture to stick to. I use Krylon.

[JERPATLACLEL]

Very clearly explained. Thanks for making this video.

[vegito1]

if I m painting the barrel (progressive silver), should I sand it down too?

[paintballingguy]

yes. any finished surface you will want to sand or scotchbright to give the paint a texture to stick to, this marker I didn't need to, because it was already textured..

[paintballingguy]

Any markers that are previously painted will need to be sanded (or scotchbrighted) to rough up the finish, this will help the new paint stick.. If it's just matte anodized (like this marker was) then you don't need to. smooth anodized markers should also be sanded/scotchbrighted

[fds584]

Ok so do not spay the barrel what about the stock

[paintballingguy]

You can do the barrel too, just plug the ends and stuff it so paint doesn't run in the porting. Paint the stock too if you want.

[urbanninja66]

buy a fat cap for like 10 cents and do the hole marker with one spray from like 9"

[tommidrab]

oo that is kewl i was gona get one but i got a-5 instead , i only wish it had the fire mode selector switch instead of the stupid whole in the grip lol

[tommidrab]

o shit i thought u were the guy from this video lol. im dumb yea i kinda wanted 2make it look woodlandishh but i had 2 idea of paintin it red/blue tiger what  marker do u have

[tommidrab]

thx ,what colors wouldu use? its repainted now anyway hah.hey u said in1of ur vids not 2ask u questions thru proivate messages but i didnt kno that n i did,could u take a look

[tommidrab]

nice paint job, i still like mine better well my old one , i have a pic as my profiles background if u wanted 2 c it!~ i painted my gun again ,using black brown olive green green, regular green and sand/beige color recently looks nice nice!~but i dont kno how 2make put vids on youtube plus ppl would laugh at my Polish accent so yea hahaha ;)peaace

[mikeandike76]

lol you sprayed the bed at 4:00

[paintballingguy]

Lol, yeah, it's an old sheet (rag) under it anyways.

[fds584]

i have spider mr1 can i do the same on my barrel and stock

[tommidrab]

no!!!

[fds584]

what are the holes to cover and do u paint the barrel at the same time or is it just the gun.

[paintballa469]

great video! 5* what are the main holes that i need to cover? ive got a spyder piloy acs