How to Solve the Rubik's Cube! (Beginner Method)

[TheStopMotionGirl]

thumbs up if you solved from this video!

[bboyazn122]

when I'm doing the final algorithm for like the last two corners the other layers don't line up

[brickhouseAB1]

explained too fast and couldnt keep up! but i wish i could do that. haha. good job

[TheCrAsye]

What if none of them are lined up at 9:41????

[lhellyeah123]

wow everytime i get up to the middle layer i do one of the algorithms then there arent any middle peices that arent yellow!!! wat am i doing wrong??

[ashmel246]

I solved it... it took a while but I did it... thanks

[thepianofreak01]

when i solved the white cross i accidently sovled the middle layer along with it ! :D

[SamsunSony123]

your epic! thanks man :D

[buechler11]

is someone eating

[nikdude1000]

OOSEM vid,i learnt it properly and got used to solving my (first)cube in one day,(the day i got my cube(today!!!!!!)).

[SrgntBlntPasser]

oh yah well rawr

[SrgntBlntPasser]

white and yellow are both bright

[reallyverymusical]

this guy is crazy smart..

[kogut1974chicago]

at 10:19 you show how to do the corners , none of mine match ,doing U R U"l"U R" U" L dont get any corners into right spot????

[danniGTXD]

I used only 2 hours to learn it, thanks for upload!!

[SuperSmackit]

I did it

[FaultlessName]

Son of a bitch! Give me my razor, I'm switching the damn stickers!

[lucypinsocute]

it skipped to final corner >.<

[Ricardoelnumerouno]

Soo you should have done an algorithm for if you have a yellow piece that is an edge piece..After you complete the white side and flip it over.. Just saying.

[CHillbmxing801]

Fuck the last layer... Im so confused...

[CHillbmxing801]

I had to write it down in a book in my own words. I get confused when you say prime and stuff... and i still can't do it.

[TheCmoney27]

Great Method...only i got caught in situations not mentioned in the vid

[HiddenRyanCarnage]

thumbs up if you watched this and you still doint have the singlest clue of how to solve this

[EdgeOfSense]

ALOT SIMPLER WAY TO MAKE THE CROSS - THUMBS THIS UP

1. Make the cross around the yellow piece opposite the white.

2. Look at the other color on a white edge piece you choose and simply twist the front layer (Your white cross) until the color on the other side of the edge piece matches with the middle piece of the other color of the edge piece.

3. Do this with all of them.

4. Now twist each single edge piece 180 degrees to end up with a cross around the white center.

[MarchOfThePenguins44]

I am super lost watched it once but ill keep rewatchin till i get it right!!!!

[CHillbmxing801]

@MarchOfThePenguins44 Me too...

[Jeydontown]

How do you remember all of the algorithms?

[recklezzwill]

This video was good. Up until the third layer. You didn't account for every situation. Including if you have a dot on the yellow side, what if all the yellow corners are in the right place but not oriented correctly.. (I tried the algorithms you gave. they don't work for it). Also when you first flip to the yellow side, what if all the edge pieces have yellow in them? -___- All of these situations have happened to me while trying to solve. Can you make another video?

[SuperYoshifan101]

you made it so easy, thankyou!!!!!

[iAMjasminej]

wtf he lost me at the d prime & stuff lol.



[MsLebbel]

I THINK I HAVE IT!

[wackamolemaster]

fkkkkkkkkkkk why does this thing have to be so damn hard!!!!!

[MScrista24]

what happens if they all have yellow 6:45????

[TeamFrostbiteTV]

@MScrista24 yeah all mine had yellow too

[MScrista24]

you coulda slowed down-____________________-

[MScrista24]

Fuck this.this is not easy!!lol

[MScrista24]

what if you solve the white side but not the first layer too? O_O

[nikoyytan]

thanks man that was helpful but umm. after i finish the first my cube isn't orented properly like yours in the video >> any suggestions

[MrAlbert96]

Who the fuck is eating cerial in the background?

[TheShadow210]

my white didnt solve it self but the corners did

[Jokercardism11]

3 steps to solve the rubix cube-

1- Get a hammer

2- Smash the cube

3- GET A BLASTED NEW ONE!

[Steelmata911]

haha ADD at the beginning: 2U 2D 2L 2R would be like this and look, it's a checkerboard =) ... k

[Steelmata911]

if you have any questions or comments comment below x) ok. =)

[drummaboy2346]

Took me an hour and a half... BUT I GOT IT!

[xXCrusherX]

gay -.-

[xXCrusherX]

what if it's on the left?



[TacticalNUKE1221]

what if the edge piece is flipped after the long algorithim after you solve the first layer

[snowxsports]

can u solve it without the r or prime u that is really hard

[ExplosiveApple596]

i hate u

[twomadcrafters]

no F,U lol

[emy123ish]

what if there is no edge piece :(

[ultimategameraka]

this helped me a lot but i need to memorize the algorithms

[MyLifeInColorAwesome]

Man this confused the Fukk out of me wtf

[janielalapico]

hheheeh... i only now how to scramble the cube but doesn't know how to put it back together lol hahahha

[TheIndotek]

Thank you!! Now I can sleep again! xD

[ImUnderYurChair]

The algorithim at 7 min is a bit off

it got me confuddled as you rotated the cube

i got it tho ^.^

[cflick96]

the last step fucks my cube up half of the time -.-

[cipfom]

great, another video that goes to fast, and that i can't get a clue from to solve my cube... --' and on goes the search

[5n3r1p]

this is an awesome video it helped a lot i did subscribe for and thanks.

[FishermanRN]

Yes i'm one of the best autists I can solve it, remember all the Algorithms :D

[mw2mafia69]

can u make a more specific video please.. i didnt get how to flip it in which direction.

[rockonman11434]

WHAT THE FUCK I HATE THIS THE BOTTOM OF MY CUBE KEEPS GETTING MEST UP GOD DMN WT FUK

[rockonman11434]

can u like um... slow the fuk down

[OneHandASL]

how do u remember this and next time plesae go slower

[AmsterdamDYME]

I got the whole top thing solved and down, but when trying to solve the middle layer, it wouldn't end up like you showed... had to re-do it 6 times so far..

[summeromancexo]

what the fuck this is so confusing arghhh

[vince1115]

i just got a cube and i am getting mad because i can't understand u

[MrAdambla]

THIS IS CRAP I JUST CANT FOLLOW IT

[MrAdambla]

6:00 - 6:07 in the first time he has 7 white cubes and 1 second later he has 8 ??? i just don't get it

[MrAdambla]

WTF can you talk a bit slower??

[brainlinksixth]

yeah, i gues just gotta kip tryin 2 get the colors in proper ordr...

[K3NNY1616]

THank you!!! my friend!!

[brainlinksixth]

bt d prob im facing is, i jus cnt gt d hang of arangin bek in order...iz ter ani other alogarithm 2 tiz...

[POWEROFCAPSLOCK]

@brainlinksixth Oh.. yeah, same here. I always mess up so have to restart... -__-

[POWEROFCAPSLOCK]

Just when I thought I was almost finished... I messed up. AGAIN.

[brainlinksixth]

how do i shuffle the rubrik cube befor i start solving? i need a reply

[POWEROFCAPSLOCK]

@brainlinksixth Just mix the cube up randomly, there isn't a certain order.

[blackseraphime]

thunbs up for the scramble music^0^

[Beaner793]

@blackseraphime sick scramble music

[GideonKoning]

7:15 all my edge peaces got yellow on it -_-

[Twini791]

@GideonKoning yea mines too ugh



[GideonKoning]

as if I can remember these algorithems! :S and I'm certainly not gonna write it all down or something.

[honzajurak]

it didn't work for me

[TheSteviebobevie]

this guy fucked up my cube.

[H4rdcor3TilliDi3]

Mind = Blown

[CheezyWeezyGMS]

:(



[CheezyWeezyGMS]

OMFG I have this cube almost done but the last part when the yellow side is almost done I have all the cross edges with different colors like the yellow side is complete the white one too and the first 2 layers from the white are complete and~

the corners of the yellow and blue and u get the point I guess... Can u tell me how to fix this freakin thing

[MissKorea3232]

what's an edge piece/

[JeffeaRtuts]

why am i watching this... I dont even have a cube

[tynantynan8]

@JeffeaRtuts same haha

[baythom]

what?

[bighead5o]

YOU ARE THE BEST. Thanks for helping me solve the rubiks cube.

[Thel4zyd0g]

great videoo!!! finally learned how to do the freeakin cube! thxs

[EgyChild17]

what the hell is this guy sayin

[stratusHBKcenation]

i got the white part done but i dont know how to do it

[Thel4zyd0g]

@techtopia 9:47 what if there is no corners oriented or lined up correctly? i have first 2 layers correct, on the 3rd layer i got the cross and all the edge pieces on the right spot but none of the corners are on the right spot

[crauco]

Thank you very much!! This will be my home page!!

:)

[crauco]

TIP: In 9:15 I had to do the alagrim 2 time. I think u 2 have to do it 2 times (if it's across)

[crauco]

I had a problem in the last part

I think I did something wrong, because when I did r' d' r d, and got the bottom face made, I didn't solve the cube

[jassuke9]

For me it was the best guide to start with and your algorithms were good also , thanks mate! :D

[miniassassin22]

SLOW DOWN!!!!!!!!!!!

[pokemonrohan]

thank u so much !! i solved it and thnx 10000000 times

[crauco]

@pokemonrohan Yuo solved it 10000000 times or you mean thnks 10000000 times?

[pokemonrohan]

@crauco well when i psted the comment it was thnx 1000000 times now it is both !!:D

[therealfarticus]

wow im still on the white...lol

[candii096]

wowwww......

thanks thanks thanks 100 times

this help me a lot....

im so happy to watch your video...:)

[summeromancexo]

obviously my rubix cube is retarded

[devynwestfield77]

ive been doing this my whole life since i was 4 and still dont have it....

[abidingallen]

i got the fist to laers and the wihte but on top i have the l but it is in the rong place

[catie1350]

this is confusing!!!!!!!

[abidingallen]

i am stuck i have no side pieces with out yellow and colors are backward plzz help

[StArBuRsT2417]

you lost me bro, i have no idea how to do this.

[StArBuRsT2417]

it was kinda comfusing because i started with the blue side, blues my favourite colour, so i guess ill start over with the white, by the way, your AWSOME!!!!!!

[xbiga17xx]

dude I solved it with out even finishing the video I was at the part where you line up the corners and it just solved itself

[xbiga17xx]

you are awesome you rock by the way the guy pouring cerel funny

[jess4372]

YOUR THE BEST. you were going fast but by pausing every second, in the end SUCCESS! hopefully i can remember all those steps though.! but thanks you helped me solve my very first rubiks cube

[AnnW1231]

can u do it slower

[mscool10mscool]

How do u solve the 2nd layer when the top or yellow side has no edge pieces that are not yellow

[ambushtheturtles]

you rock i got it tyvm

[IanLeoTV]

Can someone like... Make a video of the same method but not too fast doing? This video was great but I think it was a little too fast. Can someone make a slower version of this in like the video responses. THANKS SOOO MUCH!!! :D

[IanLeoTV]

A little confusing! Anyone can help? :D

[CoOpeYboy09]

Thanks man i have solved it twice now first time 1 hour second time 10 mins thanks for the help now i just got to remember the notations :) thumbs up

[tanaelpatrick]

thanks

[FastMotionLink]

Ok I am not sure what I'm doing. I got it down to the final layer and held the top (yellow) as the new F (face). every time i follow the algorithms it mixes up the cube and I screw everything. What am I possibly doing wrong?

[siriusgrimmauld]

when you are solving the edge pieces of the middle layer, what if there are none that are at the top (unsolved layer) that doesn't have the top layer color?

[davipooh19]

why don't the Ri Di R D work for me ! ahhhh can make a different algorithm to take the place of this step cause as many times as i try i can never finish the cube with that last step ! please help me , give advice any!!

[siriusgrimmauld]

@davipooh19 it didn't work for me at first either. but then i realized that i had D and D' reversed. D = clockwise when the face is facing you; D' = counterclockwise when the face is facing you. hope this helps!

[davipooh19]

@siriusgrimmauld thanks but i solve the last step a different way now, but thanks anyway! (:

[CatMeow0]

Btw this video really helped me

[CatMeow0]

you need to sort out the description on the positioning corners it says(and so do you) to hold the solved corner at top right but you hold it at bottom right on the video if you hold it a top right it doesnt work

[bosnianLegendXX]

fuck this



[bosnianLegendXX]

your method doesnt work 4 shit

[Aluta37]

wow you make it look so easy

[WBRWRESTLING]

damn nice job

[unsimilar2]

GO SLOWER!!!!! i had to rewind it a million times cuz u think ppl can understand what ur saying!!!!

[AnnW1231]

@unsimilar2 i totally agree

[BazookaPig]

Beginners method: take off the stickers and place them so that it looks like you solved

[MrSilverHawk12]

@BazookaPig lol



[82lowrider]

fukin FAG it dosnt even wrk shes a fin FAKE dnt wast ur time on dis stupid shit im goin 2 kik his ass if i ever see him show ur face BITCH so i can trak u down an beat da shit out of u BITCH ASS FAGIT CHILD MULESTIN DICK FUCKIN SCRODUM LICKER PUSSY ASS MOTHER FUCKER!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!­!!!!!!!!!!!!!!!!!!!!!!!!

[BazookaPig]

@82lowrider You need to understand the combinations or else it wont make sense

[RAD10ACT1V3SNIPEZ]

@82lowrider Dude... stfu u stupid 8 yr old

[soniclover22]

uhh im confused on the white corners cuz you say line them up....how? you just point to places and say white orange blue

[ThatRand0mSh0w]

what if you solved the white part first but the layer is not solved?

[XDblackfire]

@TechTopia your video on rubix cube solving is hard to understand, im in the freakin 8 th grade and i didnt get any of that, of and ask your friend matt how was the bowl of mini wheats, he was pouring some during the video

[zeshybadboy]

Hi I was wondering if you had Facebook or something so I could send you a picture of where I'm stuck on my Rubik's cube and you could help me out like tell me what to turn and were? Thanks. PM me back please

[oviyakoviya]

really..u rock..thanks a lot..its because of ur vid..i learnt solvin cube within a day,,,,16 hrs to b accurate...really..thanks a lot...luv u so mch..u r a master mind

[Richardtola1]

looooool you say it exactly like dan brown!!!

[sebastianblevdet]

***Last Layer***

Getting the Cross

From Dot: (Hold dot in any position): F R U R' U' F'

From L (Hold L in top left): F R U R' U' F(not F'?)

From Bar (Hold bar horizontally): F R U R' U' F'

[JanneChristine95]

Goddamnit, I think it's something wrong with my cube, I can never solve the yellow one..

[JanneChristine95]

I've done it a lot of times. The cross and solving the white. But i always end up with three yellow one once on the top..

[AnotherBrickGuy]

This tone of yellow is kinda similar to white...

[misscouture027]

what do you do once you start your middle layer and your white side messes up?

[firegrowlthe]

ummm i have no idea what he is talking about

[katieq449]

this is a rubix cube, it is a cube, it has 7 sides

[Xxkillcrazy99xX]

@massieboyz it doesn't matter, 180 degrees is just the opposite. Clockwise twice will result with the same as counter clockwise twice

[massieboyz]

Im Confused,when you say "180Degrees" you mean Left... Right?

[HetRockz]

i am still confused o.O

[Legendarytutorial]

i want that song 

[TheCheeseSausage]

lol...ur a genious.

[mileyloverlemi]

i cant do it grrrrrrr

[RecoilZz007]

Rprime Dprime U D Fprime ...... WTF SLOW DOWN

[GadjetWadjet]

7000th viewer!

[xxsashiewashiexx]

omg ur voice is so hot xD

[TheStar181990]

MY HEAD HURTS WITH THE U AND B AND THE F AND THE UGH!

[XXDarkShadow79XX]

Now teach us how to solve a 5x5 cube!

[ORMEXO55]

dude! I had a small book about this .......you talk like you'r reading from it

[SErBTiLLiDiE11]

wtf

[alwaysFSX]

Longest i've taken is a few years still going on... :D

[iResistant]

Thanks to you my personal best is 3mins 42seconds.

THANKYOU!! :D

[SErBTiLLiDiE11]

@iResistant really

[iResistant]

@SErBTiLLiDiE11 I've been practicing and now it's 2.01, I think ive done rather well saying I didnt know how to solve it a month ago :)

[simonloOoO]

I did mine in 38 seconds.

[immattay]

@simonloOoO i can in 12.87