Full Step by Step guide to Building Your own AR-15: Part 4 lower Parts kit

[notanotherCoDfan]

Hi I'm 13 and wanted to build my own AR. I currently own 5 guns and one of which is an AK (wasr 10/63). I was just wondeing if you knew anyways I could make money to fund an AR15 project because I can't get a job lol? Thanks

[echo4567psn]

im thinking of doing this same build could you send the list to me please it would help alot

[5150madawg]

pal-metto



[Hungryman97]

Just did my lower tonight with your video. The "professional" videos didnt stack up to this one. The use of the Allen wrenches (or punches) to start the pins was simple but ingenious and saved me about 30 minutes of cussing. Thanks!

[CGeren2]

finished my own lower receiver a few days ago and this video helped out SO MUCH thanks!

[ShawnScaggs]

That blue stuff is called Locktite!

[scumdog88]

great video

[randyb05]

Great series, looking forward to the upper did. Any idea when u will have it uploaded?

[MasterMoose00]

@randyb05 i dont have a camera XD that vid on the shooting was recorded on my iphone im getting a camera soon and ill start recording again

[BonerWake]

@MasterMoose00 wanting to see the upper. I'll subscribe



[TannerH78]

Dude you should get a lower receiver and upper receiver vise grip holder thing Im not sure what they really are called but its a lot safer than taping you receiver and throwing it in the vise.

[bhasibhaai]

Thank you.I just used your video to guide through my first AR lower build.

[poolinaround]

Great vid. I will be using this to help with my future build. Is that the foliage green?

[smokeu600]

hey thanks a lot for the vid,i build my first ar15 3 days ago,started at 11pm and finished at 1am lol no vise no special tools no punch kit,it came out nice not a single scratch.

[SmithNWesson500]

I really enjoyed watching this video. I was a little intimidated by all the little pieces that go in the lower; however after watching this, it isn’t as bad as I thought. I was going to order the Spikes lower with the enhanced kit installed. Now I’m going to actually order each piece individually. It may take longer, but I want my build to be exactly the way I want it.

[arbiter569]

where is part 5?

[360jeepboy]

@arbiter569 yea I can't find it either....

[hippielettuce1988]

21:00 why not?



[MasterMoose00]

@hippielettuce1988 you'll smash up your bolt catch lol

[MadCat58]

No joke i want to build mine over buying one, thanks for the inspiration. I subscribed too!

[MrYounggunner87]

Loving this video series!! You have done a great job and made an awesome looking AR!! Can't wait to watch the video of you shooting it! 

[OwKGuy]

Great video dude, thanks!

[exodipus]

Cool man. I think you did a good job, especially on your first time through! AR15s are like LEGO, and they have a tendency to multiply.

[SuperLouis420]

Where did u get your mini vise????

[MasterMoose00]

@SuperLouis420 i wish i knew i love that little thing

[Herrmen86]

@MasterMoose00 I saw them at harbor freight a few weeks ago. cost like $20 I think.

[sarclmbr]

@SuperLouis420 Harbor Freight...search for "vacuum vise". 16 bucks.

[poolinaround]

@SuperLouis420

Harbor Freight has it

[SmithNWesson500]

@SuperLouis420

If you're still looking for those vices, go to Amazon and do a search for 'hobby vice' they have quite a few to choose from.

[dwwilliams72]

The errrr......blue stuff is called Lock-Tite. LOL Also, get yourself a hammer with a poly head on it. That'll save the finish on your guns, rather than scratching off the factory finish. Other than that, GREAT videos!

[neubauer6]

Great video! You bought your LPK from Palmetto State Armory right? Sounds like you might be watching too many Steeler's games (Polamalu).

[Jesusnugget]

i'm a cat

[leviet2010]

which part would i need to get shipped to my ffl dealer? the upper?

[MasterMoose00]

@leviet2010 the only peace that has to go through an ffl is the lower

[A1theAPEX]

@MasterMoose00 where is the video showing the upper?????

[Sacreppin916]

i have the same lower reviever you do the spikes tactical. im gonna be building mine within the next week or so and i was wondering how did you paint your reciever and what with cuz you did a good job! very helpful vid will be using this to guide my first AR build

[MasterMoose00]

@Sacreppin916 lol noice man, check out video #3 i has how to paint it

[radeon328]

Great vids !!! Keep'em coming

[MasterMoose00]

@radeon328 yes sir ordered the last part i need to finnish this beast last night i cant w8 till it gets here!

[goooser410]

Good job on the video!!!!!

[TMSLAUGHTER26]

also i wouldnt mind a lil criticism on my videos either....

[TMSLAUGHTER26]

what a rookie.

[MasterMoose00]

@TMSLAUGHTER26 if your not a rookie why are you watching this video lol, i am and im not afraid to admit it lol!

[TMSLAUGHTER26]

@MasterMoose00 what? Pros cant watch rookies fuck up on youtube and comment about it?

[MasterMoose00]

TMSLAUGHTER26 i dont recall messing up please elaborate? if you have backing for your argument then ill respect it

[TMSLAUGHTER26]

@MasterMoose00 YOU REALLY WANT TO DO THIS?

[MasterMoose00]

@TMSLAUGHTER26 im always trying to improve nothing wrong with a little backed up criticism

[TMSLAUGHTER26]

OK I GOTCHA NOTHING EXTREME was wrong but let me watch the video again i'll tell you what i think. that was RoOkIe esc to me.

[TMSLAUGHTER26]

here we go 1:41 eletric tape instead of a magazine vise block. 2:03 you called it a buffer retainer hey whatever you fucked up on the name but you corrected it. i think thats what made me right the rookie comment BTW. 2:47 the whatchma call it eyyyyyy... 3:15 messed up again now your acting a fool.. 3:50 scared to hammer the pin in there..come on hit it! you nancy! the lower isnt going to shatter! 4:13 the pin isnt going in either pound it harder or something is outta line.

[TMSLAUGHTER26]

fuck this man look that was only 5minutes in to your 25 minute video. im not going to sit here and nit pick you

[kevin26tx]

Where are you getting your Upper Parts from ?

[MasterMoose00]

@kevin26tx i was planing on aim but they kinda failed me, im going to try to find someone elce itsa work in progress

[fireman8900]

A missle from mario or something.... ftw...!!!!!

[chevygearhead454]

Do all the pins and springs come labeled?

[MasterMoose00]

@chevygearhead454 nope its not that hard to figure out took me a little but i got it just look what they look like on the video and ull be good the smallest one's r for the take down pins the second smallest if for the bolt catch, then its pistol grip, then its buffer if i remember right its been a while

[OMGxITSxAxZEBRAxLION]

@MasterMoose00 alright that sounds sweet cant wait

[OMGxITSxAxZEBRAxLION]

Ok thanks... Your really helpful and you respond fast...if I could subscribe and like more than once I would

[MasterMoose00]

@OMGxITSxAxZEBRAxLION thanks man im just glad to help i wish i could make more videos but recently ive been really buisy with school and my 2 jobs, as sooooon as i get payed im ordering an upper and putin it through the ringer, reliability, diff ammo test, you know the stuff every one cares so much about lol (most ppl dont but ive been looking around for ever for some one that shoots a group with there spikes tactical upper, so im gunu do it)

[rsv1336]

@MasterMoose00 where do you get your music the piano song at the end is epic whats the name of it?

[OMGxITSxAxZEBRAxLION]

Can I get a varmiter upper and a tactical upper and just switch them out for the task at hand...t

[MasterMoose00]

@OMGxITSxAxZEBRAxLION haha hell yea bro that sounds sweet, varmiters ar really heavy and acurit, tactical ones r lighter and usually have like a 1:7 twist, m4 feed ramps, and all that garbage good luck man

[OMGxITSxAxZEBRAxLION]

Ok sweet...I subscribed you've got the most information on building an ar on YouTube I can't wait for the next vid thanks

[cpercival02]

hey bro great vid....im in the process of building my girl an ar15 for home self defense...good back ground music, and all that jazz...ne way keep em coming....OH YEA OD-GREEN IS THE WAY IM GOING AS WELL everyone has FLAT DARK EARTH

[WatchMeBleedESTK]

I wasn't too into the spikes lower, but that one is daaaamn nice. I think I just found a new lower to buy.

[OMGxITSxAxZEBRAxLION]

thanks i actually changed my mind to a bcm (bravo company) upper your videos help alot ...and im a complete noob and idk how to attach an upper to a lower... is there just a pin or something also will you make a video of the finished product?

[MasterMoose00]

@OMGxITSxAxZEBRAxLION yea man in about a week i get my next paycheck and ill order the upper then and ill make a video asap!



[slmarks8]

@MasterMoose00 Hey man, I am actually in the process of building my first AR. I have everything but the bolt carry group and firing pin. I got my barrel from BCM Bravo Company 16". Its pretty badass. I have Spikes upper, lower, and bolt. OD green magpul stock and grip. My flash suppressor is a VLTOR $55 but looks tight. I have been doing alot of research and I am pretty good at this kind of stuff. Let me know if you have any questions.

[EarthyShattered]

It's pronounced Paul-meadow (Palmetto) state Armory. Not palamala. lol

[OMGxITSxAxZEBRAxLION]

could i use a bushmaster upper instead of the spikes... if u answered it have really helped mewould help alot and ur videos

p.s. i would still be using a spikes lower

[MasterMoose00]

@OMGxITSxAxZEBRAxLION yea man of corse ar-15's r universal in that aspect you can combine any with any there is not really that much non compatability just in the stocks where u got a millspec or commercial buffer tube.

[SGTlonewolf629]

You know what I like best about this video? You have a good camera, you've done some editing, which already makes you a god of youtube. But the clincher oddly enough is that I feel like less of a noob for taking so long to put mine together XD

[MasterMoose00]

@SGTlonewolf629 hahah dude it took me so long u only saw about half of what i recorded lol

[SGTlonewolf629]

@MasterMoose00 Oh I know, that's what I meant by the editing. XD as an aside, if you do more videos you might want to consider recording your voice after you get the whole video done, that way you can say exactly what you want when you want without pausing too much

[MasterMoose00]

@SGTlonewolf629 lol yea ill try that some time im gunu order the upper hopefully soon just w8ing on aim

[SGTlonewolf629]

@MasterMoose00 good deal, looking forward to it. I'm buying a new stripped lower from AIM and I'm having a hell of a time finding an FFL to do it. Stupid MD law.

[Dionscott55]

So is all the parts to build this gun included in the your ar15 build paper?

[MasterMoose00]

@Dionscott55 yea bro all the parts come in a nice kit its called the lower parts kit

[Bluestarcinema]

@Dionscott55 whats the name of the song playing at the start of the video, and the one playing from 15:00 - 16:00 ??? please let me know!

[chicwboost]

you need to thread in that buffer tube in one more full turn homie

[xXkinnerkXx]

Great vid. Invade you were wondering the blue stuff it's actually lock tight. It helps secure screws in place so they don't get loose and fall out.

[MasterMoose00]

@xXkinnerkXx i figured but didnt wana say anything cuz i didnt know for sure, thanks bro

[Survivalonabudget]

good stuff, cant wait for the next vid!

[MasterMoose00]

@Survivalonabudget haha yea man me too lol lost job and applied at like 7 places cant find a darn job lol more funding is on the way and hopefully some testing videos thanks for the kind words and good luck!

Moose

[duke3oh8]

this series is noob friendly. I will definitely be adding these to my favorites for future reference!

[FireArmsResQ]

Great video man. You're one of youtubes elite. Not everyone gets the priviledge of posting more then 15 minutes =P

[MasterMoose00]

@FireArmsResQ thanks man idk why but one day youtube sent me a message, "hey yo ni**a you can now post videos >15" i have no idea why i only got like 100 subs but hell im not complaining lol

[FireArmsResQ]

@MasterMoose00

I know some peopel with 300 videos who dont even have that priviledge. Youtube is a fan of your work!

[jamoore3192]

I gotta say, that might just be the best how to video for a lower I've ever seen.

[MasterMoose00]

@jamoore3192 ur to kind jamoore lol

[jopoy456]

Nice job man. I really like your videos.

[MasterMoose00]

@jopoy456 Thanks man i noticed you play xbox did u buy mortal kobat yesterday?

[jopoy456]

@MasterMoose00 No problem. Umm nope I'm not really into fighting games. That's the Spikes Battle Trigger right?

[MasterMoose00]

@jopoy456 haha its cool, i wish i plan to upgrade to the spikes battle trigger and nib bolt in the near future. its just a stock psa trigger, all contact points are polished so it is really sooth i was surprised.

[jopoy456]

@MasterMoose00 Ohh nice.... What would you estimate the pull at? You should buy some JP reduced power springs, only about $10 and it reduces the pull pretty damn well.