MG 00 Raiser (Part 8: 00 Raiser) Gundam 00 gunpla model review

[02Jc19]

I have the 00 Seven Sword and I'm thinking "Should I get the 00 Raiser?" hmm what you guys?

[spamerultra]

Whered the green capsule for the left leg go?

[shinn214]

@rrobbert184 the pg 00 raiser can point the side binders forward.. the gn drives rotates all the way.. btw, is this worth the price?

[thepryooper]

@shinn214 yes........nuff said

[EclipseHedgehog]

the wings below the drives are very loose.

[DontEatWhales]

Hey rrobbert184, I was wondering, I don't see an awful lot of lining on your MG 00 Raiser there. I just got mine, and I'm not bothered to line it. So in your honest opinion, is it worth it to line Master Grades, or are they fantastic enough on their own? thanks

[3Athrun]

YOU ARE BADASS MAN

[MegaTomchan]

i do think the wings and backpack are too heavy...

[ZhaneX24]

Hmm...I'm a bit surprised that you didn't mention the Drive Arm Locks (Unless I missed that somewhere)

It's a tiny little detail, but still cool. At the connection of the Drive Arms to the backpack, there's a tiny little rotating piece. By rotating it, you can lock the Drive Arms up, letting you keep the GN Drives up a bit higher, even in Raiser mode, without the worry of the side-binders weight pulling them back down. Did you not notice this detail, or did I just miss you showing it?

[setsuna1f1seiei]

I was waiting for a "00 Raiser...Again..."

[tosthage1]

mine doesnt have any weight issue what so ever (unless you do something CRAZY like having a 90 degree flying pose)

[FallenZyros]

The PG's wing binders can rotate forward exactly like the MG does. >>;

[3520xdxd]

So Rrobbert which one do you like better GN drive or condensors?

[BlueX273]

HOLY HELL!!! Like f*ck the Perfect Grade! This has more than enough awesomness to satisfy!

[ParmyxD]

it's actually the same for the PG 00 Raiser, just rotate the drive to bring the binder forward

[7kiku7honda7japan]

I've heard this thing has LITTLE weight issues... gonna have to see for myself when I get it.

[coldnhot369]

@rrobbert184 Why didn't you spread the 00 raiser? it would've won the widest comparison.

[cappuccinokit]

The weight issues are expected, but overall this is a fantastic kit

[derricf]

HIS GN SWORD WILL PIERCE THROUGH THE HEAVENS!!

[hhhmw]

hey rrobbert, you didnt review the gn sword ii staff.......

[mickeyzkun]

mine also can stand straight without weight problem and don't have any problem when the gn sword III(sword mode) is put on its not falling i think because each parts of my 00 raiser is stiff. can't post the link for the pic of my 00 raiser argh!

[17107443]

Where's the clear green piece on the left leg? My stand connector's really loose :'(

[GUNDAMZHEN65]

PERFECT !

[ConvoyGTR]

the gn sword iii is so sexy

[00Jgundam00]

1:26 00 Gundam:I will destroy A-Laws!!! 1:30 00 Gundam: Oh no,I'm low energy now!!!

[mechaman13]

Wow!!!! This MG is impressive. Great review as always.

[narubaku]

i foresee a trans-am version coming our way

[WOL193]

i like your review, cant wait for my MG 00 raiser to be delivered this Friday :)

[qu7aker]

IF GOD WANTED A GUNDAM IM PRETTY SURE THIS WOULD BE IT :D

[suiton629]

@rrobbert184 The GN Sword III would be even better if we had a Master Grade Exia Repair 2 kit.

[gunplanut]

Mine kept falling over when fully loaded. I fixed that with an action base, but it is very wobbly and it has even fallen off that afew times.

[sasukeuchihakenshin]

Hi rrobbert....Idk if you noticed but there's a missing clear piece on 00 Raiser's left leg hehe...opps ^.^"

[surpremekingjudai]

Btw rrobbert you should do a MG epyon review when you get the kit!! if you do that is ><

[blackassassinknight]

i wish bandai makes a trans am burst 00 raiser with cool GN particles parts

[SpardaBane]

this gundam's arms look like Qan[T]'s. does that mean the GN Sword III can fit in Qan[T]'s left arm?

[Skiwiddle]

00 never disappoints

lol if you turn the captions on, double o becomes double oven

[HelioLukos]

The perfect grade has the exact same feature for rotating the binders forward.

[Dragonman0876]

Kits like this wif humongous wing span always takes up so much display space.. Just like the Hi Nu, Sinanju, Strike Freedom, etc..

[Raylinewalker]

im just start thinking it good to not rush n buy 1/100 desighner color

[CitrusJuicebox]

How similar are the frames between the 00 Raiser and 00 Qan[T]?

[philipho188]

Sweet, sweet, sweet! XD

[crapmunky99]

This is looking pretty impressive, actually!

:)

[kingmetal]

Is this your longest review??

[ThePatxiao]

@kingmetal remember the PGs

[waterfire163]

wend you where doning the review the clear peace on the leg was off

[gearofwar113]

weight issues as expected but the point they make it stand firmly is ok. Btw who is gonna need this thing without a base ?

[scanprod]

man, it still looks amazing, even if its back heavy

[bobbydoggy9472]

Spread those legs.....err I mean wings! Wings!

[emad402]

GP02 is not wide hes horizontally challenged ( just being politically correct ) :P

[ComedicShinigami]

@emad402 I don't think he's challenged in any respect horizontally. I think the politically correct term is morbidly obese.

[ndalum75]

The perfect grade did have the ability to move the binders forward or backward.

[Shiimochi]

IT'S ALIVE!

[ABCba5tard]

left leg's clear piece missing

[mrcipher00]

you forget to compare that with strike freedom

[broodjebamibal]

A very small layer of glue/paint on the arm peg should thicken it enough to make it not droop.

[inlazoname]

Bandai's MG masterpiece after MG sinanju, god i cant wait 2 weeks before my order arrives!!!! LOVE IT!!

[raiser188]

everyone just notice the missing part??i already know from the part 7

[WhitzWolfCrusher]

Even though I'm not a huge fan of the aesthetics of the 00 mobile suits, I find myself really impressed by this kit.

[Albicrane]

u lost ur gn condenser green piece on ur left leg...?

[mrcipher00]

oh my gaed!

[Mugenkogane]

hmmm...weight issues are really no problem for me, because its the 00 Raiser, you'll never have the 00 raiser fight on the ground. its always in space or in the sky flying so I'm going to forgive it not standing up properly, If If i'm going to pose on the ground I'll just remove the 0 Raiser anyway. oh and the raiser sword was really impressive, that made me almost want to buy it, but ill wait for rrobbert's verdict before I buy this.

[TheMADZEUS]

the only reason i actually bought the MG 00 rasier is because of the GN sword III and the affect part

and from what i saw so far its so worth it

[Sinesthesia123]

Well the weight issue is expected

[mApppel]

weird, mine can stand straight as the OO raiser without any problems. thats what actually impressed me the most about this guy! :O

and yeah, you are missing a clear leg piece there^^

[SkyeYokooji]

@mApppel ya the same as me

[TheRhinoAutobot]

im from the USA so where can i buy the extra led for the mg lead gundams from 00

[Kefkaownsall]

@TheRhinoAutobot tatsuhobby or Gundam Guy

[trickyricky982]

@TheRhinoAutobot 

[RedGuren]

Lock mechanism on the GN drives is awesome. Now I'm considering of getting the master grade, and hiding away my 1/100 no grade.

[Negispringfield3]

where's ur GN condenser at the left leg?

missing part?

[Mecha82]

Well seems like there is some weight issues.

[Zer0megaXX]

yep i have to get this now

[TeaBubblez]

hey rrobert in your vid are you missing a left leg green clear piece? xD

[bigred2989]

If they made it so the 00 Riser didn't have a damn plane for a backpack I'd like this design better.

[gundam00lover4eva]

You know when people say first they sound like douches, but when you are actually in the first few comments it feels good.

[rumilization]

yeah.. might have to get this.

[bundung123]

awesome gundam