Nothings free that’s why the advice is life is what you make it and it’s a crook on a bike who gave me that advice who sells stuff on eBay I know why he said it to piss me off and because of this lol
HID should only be used country-side (i.e: low population areas, not cities). So yeah. And if you got 2 housings for a low and high beam only install the hi-beam with HID and keep the low beam as halogen. Peace.
You're fucker... With this shit you blinding incoming traffic and cars in front of you. That shit must be ILLEGAL!!!!! HID must be with PROJECTORS, not with OEM REFECTORS idiot... I broke some headlight of some blinding idiots like you on my way. Don't come arround me...
@supermotardmario Audi's aren't worth the money and BMWs are ugly, especially the earlier ones. So no, I'm not one of those "morons." I also don't care what kind of car you drive either.
this asshole just put another piece of shit on the road
READ THIS ALL YOU HONDA DRIVERS
your headlights that hold halogen bulbs simply cannot use HID bulbs, You need a new headlight housing or retrofit projectors and then >*AIM*< the projectors, for gods sake AIM your headlights and dont just hook up an HID kit and plug them in and call it good.
When using halogen housings you are losing most of the HID brightness bennefits because most of the light is scattered
These kits will get you a 250 dollar ticket if you dont have a PROPER hid projector lens that is DOT approved. Basically any hid conversion kit that you put the bulbs into the stock non hid housings is ILLEGAL
Question: To install a H4 (hi/low) bulb into a headlight that has a metal or chrome cover (for not blinding the other cars) is it possible?? Or should I first remove this cover (from the headlight)?? Or it doesn't matter?? Thanks...
hey guys im selling Japanese made HID Conversion kits on amazon. our kits start at $100. it includes 2 HID bulbs, 2 Digital Ballasts, 2 mounting brackets, installation accessories and 1 year warranty.
go to amazon and type in "sani hid" and then you will come across some o-nex HIDs. O-NEX HIDs are made in JAPAN!!! not the cheap ones that are made in China these days.
i bet most people didn't know that about 95% of aftermarket hid kits out there are illegal don't believe look it up it was one of the hundreds of new laws passed this year..
I have halogen lights on my honda. I just bought Hid xenon bulbs from ebay, but it didn't come with the other wires he had. Is that a problem? Can't i just replace the halogen bulbs with the xenon and that's it? Or did i have to put in more wires?
If u got the bulbs already try getting the ballast and wires that go to the stock harness try looking 4 them on craigslist sumtimes someone in town sells them that's were I got mine u got the bulbs now u need the balast 2 of them and the wires
@purecussion um did you bother to read anything about hids before ordering, hids are run at a much higher voltage so therefore you need the ballasts. And from the sounds of it I wouldnt recommend you doing anything since you need to have self level projector head lights in order for you to be street legal
found one problem when i installed it. they both are working fine. the only problem is when you have the low beam on, and the fog light on, at the SAME TIME and when you switch it to high beam the fog lights stay on. when i'm trying to switch it back to low beam it won't let me. it will just stay on high beam with the fog lights on . what is the problem please let me know thanks what do i do to fix it, or what do i need
This comment has received too many negative votesshow
send the power to what fuck face. I just dont get it you make a bull shit video talk youre ass off the whole time about what a POWER WIRE is and then you cut your video short. Again youre mom = dead
are you fucking retarded. I really don't like this video. You gotta stop wasting you're fucking time cause id rather have a fat 90 year old nigger jerk my penis off then look at this video. Youre a scrub ass homo so you need to go away. And i hope youre mom dies...
Dang, Honda Accords that year make are a pain in the but to replace a bulb I didit with my skinny white boy hand and didnt know about that air filter thing could be removed :D It hurt the hand quite bad to take it out.
yeah you can definitely do that. On my 325i I thought i was going to HAVE to which would mean i have to take off the bumper which would suck, except i found a panel in the wheel well that allowed easier access to the light. Removing the whole housing would definitely make bulb installation easier though
very detailed...but is it simpler to , lets say i buy the whole headlight, ( i want HID halo headlights) is it just unplugg the old one, pop the headlight in and replug everything the way it was?
wow how official is it to add hid's into a stock projector....most Xenon bulbs burn around 12,000 degrees Kelvin as compared to halogen@ 3,200 degrees Kelvin....this causes melting/fires/and a way to bright discharge that can blind other drivers...but dont get me wrong HIDs all the way....stronger brighter etc
The Kelvin is the COLOR temperature, not the actual temperature of the bulb. Most HID's that people prefer are 5-6K Kelvin, which means a white to slightly bluish white light. 3,200 degrees Kelvin in actual temperature is hotter than the sun!
@paulbreor LOL you dont get it do you? when thay say 3000k or 6000k or 12000k they are talking about the color temp basicaly the color 3000k is yellow 4500k is white and 12000k is purple its not the temperature as in hot or cold actually hid's have very little heat and use much less power than halogens think about it 12000K thats like the same temp at the sun LOL it will melt your cars front end off
my black and red cable dont fit to the original harness cuz i got aftermaket projectors wit different bulbs can i just cut the while little box and re wire red wit red and black wit black ?????
You fail at understanding things. =p j/k I know im not the best at explaining things... Look at my other video "Install HID Conversion Kit" it explains better
Well, the description is correct - HIDs are better than halogens, but only when controlled properly by a HID lamp.
A halogen pattern is narrow, and has a slight amount of glare. When installing a crappy HID kit in such a light, you get lots of glare, an unfocussed beam pattern, and you get too much light just in the center infront of the car, which reduces your nighttime visibility.
HIDs in HID optics are gold, but this is NOT an improvement over halogen AT ALL!
asshole is as asshole does... all i was saying this guy is hard to follow... and doesn't really know what the hell he is doing most likely... but then again he may know but no one knows...
Additionally this is ILLEGAL in every state! And you blind everyone on the road, even some that are dropping them into their OE projectors - many are not designed to handle the amount of light and beam pattern. Plain stupid and irresponsible.
yep... i can honestly say on my way back from taco bell last night i was blinded by on of those projectors, it looks cool but when you get blinded by it... you know it. And i was driving a 2008 tundra crewmax, and thats quite a bit of the ground to get blinded by a civic. but i was also looking up a grade. but i agree about the road use, but for racing on a track i could see the use, i mean everyone is going the same way and not towards you. (i hope) lol
@jcashrednek Very helpful if your a complete moron, which obviously you are. Don't even respond back because I will not even acknowledge any more of your comments.
@7jimmyjames you obviously cant get it dont with this guys help i dont know how a dumb ass can help everyone i guess your not everyone stfu u clown go blow another rice burner
Just don't forget these retrofit HID conversion bulbs are illegal to use on the road in the US, Hong Kong, Malaysia, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luembourg, Malta, Netherland, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, UK........
were can i get the harness that you connect the two wires to like you showed at the beggining of the video??? my kit did not come with it.. i looked everywhere i cannot find it
Wire harness will do you lots of good for $20-$25. I didn't install my kit until I got the harness for it; I just really like knowing there is something between my car and the HID kit.
ive had my HID conversion kit for bout 3 months now and its ONLY my left side that, when i turn on the switch, it flickers and doesnt turn on.. i have to turn the switch on and off like 4 times before it turns on. then its fine after that. but its a bitch turning it on 4 times everytime i need them. ANY HELP???
it looks like your ballasts are not receiving enough power to feed the bulbs, since you are probably using your stock headlight wires. I'd suggest you get a harness that will take the power right out the battery and a relay provided will switch your HID's on when you turn your headlights.
can i just buy a relay harness from like autozone or does it have to be specifically for my HID kit type (9007 is for my car) ? i read somewhere you could and you can splice wires to connect to hid wiring then to battery. thanks by the way for reply
Sorry I get a new Accord every 2 years. I dont waste my time trying to remember something that I know I wont have later on. Plus, they freakin change the body every 2 years. Maybe I should make a photo album for every accords I ever owned?
are u retarded? the accord had the same front end from 2003-2007, so since your mr.bigshot you've had an '07 accord and an '05 and an '03 and you dont remember the front end? odd.. i'd go see a doctor
I just got my 6000k kit yesterday from SparkHID DoTCoM, install it today, man what a big difference. LOVE THEM, WILL EVER GO BACK TO HALOGEN BULBS. Nice, Bright and clear. can see all the pot holes and speed bumps ect.... GOOD vision sparkhid dotcom
are you serious haha. Xenon doesnt blind?? have you driven at night while an Acura/BMW/MB drives at you. even with a projector it still blinds you haha.,. its even worse when you dont have a projector like this video
yeah im serious. Xenon CANT blind. thats proven. ppl probably think its worse cause they look directly into it cause of the brightness. And again as said bevore: if u switch those wrong adjusted headlights back to halogens its even worse. And yes i have seen a lot of those tuners, installed HID kits. Never had problems with them driving by. Really, never. But often have problems with ppl blending me, but that has always been halogen only. The only ones blendin are halo cars & trunk full of crap
Any light can blind you. And ur saying an hid kit which produces more lumens that a halogen which is therefore brighter than a halogen cantblind you. Halo cars? Do u mean a car with projector own headlights which are properly aimed or the cheap eBay ones that use a fog light lens reducing light out put? Xenon is a gas by the way, but the light produced by the reaction blinds you.
google it and youll see it. I'm sure that there'll be enough sites who explain it to you physically. What you say just isn't true. And again i say, Halogen is always worse than xenon, no matter if they are both are aimed right or not. Thats a fact.
I thought u couldnt use these with reflector lenses..
Now if you're installing hids into projectors will the projectors automatically provide correct aim? Cuz i know that bad glare can be caused by incorrect aim of the light..
well from what i've heard, there are halogen projectors and xenon projectors. So i guess you cant put HID bulbs into a halogen projector and vise versa.
what lightbulb would fit in my civic 02 coupe? H1, H2, H3 etc..and if i change the headlights to angel eyes, would i still be able to use the same lightbulb for these?
There are kits out there that are much simpler to install, ive dealt with visionpro and Mcculloch HID systems and they are both real easy to install, but this is a good how to video too, just explore your options
Dude that's help full but how did you install Power box. i did what you did with my car Mitsubishi Lancer ES but thing is that my head light weren't made for HID's and i have no clue how to install Power box to provide more power.
Nothings free that’s why the advice is life is what you make it and it’s a crook on a bike who gave me that advice who sells stuff on eBay I know why he said it to piss me off and because of this lol
JustBeatItNow 5 months ago
OH NOE! u touched the bulb with flesh!! bigg no no
PhanNTran 6 months ago
Now in English, please !!!!
mmxxii2012 6 months ago
stick it in like THIS.... stick it in like THAT.
jazfromhouston 6 months ago
That chick looks hot! You should have her install and you hold that camera!!!
rickkristin 8 months ago
lol you fucken fail at explaining XD , you seem like you have trouble souding out words lol XDDD!!!
LACounty8l8 9 months ago
does anyone know if i have to grounds these bulbs inside a bmw if im trying to connect the bulbs or i can just only connect up the bulbs
y2jpspmoney 10 months ago
anybdy hearin this guy???
jyungd213 10 months ago
shitsss confusinn
crazyboy0844 10 months ago
honda = perfect
elmhstr 11 months ago
HID should only be used country-side (i.e: low population areas, not cities). So yeah. And if you got 2 housings for a low and high beam only install the hi-beam with HID and keep the low beam as halogen. Peace.
928baller 1 year ago
You're fucker... With this shit you blinding incoming traffic and cars in front of you. That shit must be ILLEGAL!!!!! HID must be with PROJECTORS, not with OEM REFECTORS idiot... I broke some headlight of some blinding idiots like you on my way. Don't come arround me...
kawazuki2K 1 year ago
People hating on Honda's are just mad because their damn car breaks down every month....
sixstrings2 1 year ago
u need to either retrofit HID reflectors or projectors. You will cause lots of glare to other drivers. Spend 1k and do it right.
sga86 1 year ago
oh noo....
deevibez 1 year ago
Two problems here:
1. You're driving a honda.
2. You're installing HIDs in a reflector housing. Spend some money and get some damn projectors.
You're not going to pass your state inspection, and you're going to blind every person on the road. Good luck not getting pulled over.
360Spider 1 year ago 8
@360Spider
1. Why U hatin on Honda??? Thats perfectly nice 7th gen Accord
2. I installed 4300K bulbs in my moms '10 Odyssey and I got the lights re aimed.
Just took it into an inspection, it passed, and I went to a good state inspection place, not some ghetto lot.
Indeed projectors will be better without a doubt but these reflectors are fine for HIDS
Aquafresh94 10 months ago
@Aquafresh94 how did you re aim them?
sfchawks01 7 months ago
@360Spider hondas are the best , i bet you are one of those morons who think bwm audi or any of that shit is pretty.
and i drive a mercedes benz , so im not humping my own brand
supermotardmario 1 month ago
@supermotardmario Audi's aren't worth the money and BMWs are ugly, especially the earlier ones. So no, I'm not one of those "morons." I also don't care what kind of car you drive either.
360Spider 1 month ago
@360Spider if you say that the problem is that "he is driving a honda" ... that sounds like what a moron would say tough.
the only bad cars imo are italians
hondas keep going , they ride good, easy to work on , and they look good
supermotardmario 1 month ago
this asshole just put another piece of shit on the road
READ THIS ALL YOU HONDA DRIVERS
your headlights that hold halogen bulbs simply cannot use HID bulbs, You need a new headlight housing or retrofit projectors and then >*AIM*< the projectors, for gods sake AIM your headlights and dont just hook up an HID kit and plug them in and call it good.
When using halogen housings you are losing most of the HID brightness bennefits because most of the light is scattered
paintballgundown8 1 year ago
@paintballgundown8 i think this goes to all people. dont just include honda drivers because all people with different cars do it too
blaklabel13 1 year ago
I like your girlfriend ... you can see her reflecting on your accord in 2:26
0680197 1 year ago
@0680197 LMAO bro ur stupid! She did look kinda good tho
kjwade 1 year ago
These kits will get you a 250 dollar ticket if you dont have a PROPER hid projector lens that is DOT approved. Basically any hid conversion kit that you put the bulbs into the stock non hid housings is ILLEGAL
andyass3 1 year ago
so you're trying to setup a business and earn some easy money, eh ?
Basically you're simply reselling stuff from china AND you totally fail at speaking.
A real businessman needs to be able to speak properly
rickysnewstuff 1 year ago
Another selfish moron with an aftermarket HID kit without the projectors.
pimpninja1985 1 year ago
Question: To install a H4 (hi/low) bulb into a headlight that has a metal or chrome cover (for not blinding the other cars) is it possible?? Or should I first remove this cover (from the headlight)?? Or it doesn't matter?? Thanks...
terisflo 1 year ago
That Honda accirds lights are a pain in the butt to remove : )
200twistatwista 1 year ago 4
i got hid kits for $65 people get at me! $70 shipped!! good quality
deucez323 1 year ago
way to blind everyone on the road.......... thanks
aspensubi28 1 year ago
JAJAJAJAJA so how am i SOPPoUSE 2 stick it iN jaja LOL man awesome vid
OmarRam1 1 year ago
How do you mount ballast? (In general because I dont drive a Honda)
DJEddieXZ 1 year ago
1:59 to like 2:10 is about stickin it in lol
Ericjizzy09 1 year ago
it is not street legal without auto leveling system.
wncheeta 1 year ago
worst installation I've seen....your confusing everyone....jesus man
NYballer11725 1 year ago
pfft its not an accord, unless its a v6. J30 baby! :D
sharpietagger24 1 year ago
@sharpietagger24 lol i agree
cheeseburger9418 1 year ago
@sharpietagger24 It's not an Accord unless it's J30 w/6-speed... :)
SosiBibuSuka 1 year ago
@SosiBibuSuka what if the person who owns a J30 without a left leg ?
sharpietagger24 1 year ago
hey guys im selling Japanese made HID Conversion kits on amazon. our kits start at $100. it includes 2 HID bulbs, 2 Digital Ballasts, 2 mounting brackets, installation accessories and 1 year warranty.
go to amazon and type in "sani hid" and then you will come across some o-nex HIDs. O-NEX HIDs are made in JAPAN!!! not the cheap ones that are made in China these days.
SaniHID 1 year ago
@SaniHID how are you selling it for?
Motogp114 1 year ago
orale vato loco!!!! xD
suicidesamurai01 1 year ago
so the white wire to the red and the black to the black? LOL
truviet143 1 year ago
i bet most people didn't know that about 95% of aftermarket hid kits out there are illegal don't believe look it up it was one of the hundreds of new laws passed this year..
nismojuan 1 year ago
no one gives a rats ass. anything you do to mod a car practically is illegal. quit your bitchin pussy.
dre5491 1 year ago
go fuk ur mom u inbred swine
nismojuan 1 year ago
ya man quit bitchin
karsseboomh22 1 year ago
this video is so fucking stupid he made it harder than it realy is i installed mine in a honda accord in less than 15 min
mario18761 1 year ago
I have halogen lights on my honda. I just bought Hid xenon bulbs from ebay, but it didn't come with the other wires he had. Is that a problem? Can't i just replace the halogen bulbs with the xenon and that's it? Or did i have to put in more wires?
purecussion 1 year ago
you have two get the ballast two those are the square box's the kit comes with 2 light bulbs 2 ballast wires and zipties
mario18761 1 year ago
crap. I didn't get the ballest wires and just the 2 bulbs! I thought i could just switch the bulbs and that's it.
purecussion 1 year ago
If u got the bulbs already try getting the ballast and wires that go to the stock harness try looking 4 them on craigslist sumtimes someone in town sells them that's were I got mine u got the bulbs now u need the balast 2 of them and the wires
mario18761 1 year ago
@purecussion um did you bother to read anything about hids before ordering, hids are run at a much higher voltage so therefore you need the ballasts. And from the sounds of it I wouldnt recommend you doing anything since you need to have self level projector head lights in order for you to be street legal
ferrari62589 1 year ago
This has been flagged as spam show
found one problem when i installed it. they both are working fine. the only problem is when you have the low beam on, and the fog light on, at the SAME TIME and when you switch it to high beam the fog lights stay on. when i'm trying to switch it back to low beam it won't let me. it will just stay on high beam with the fog lights on . what is the problem please let me know thanks what do i do to fix it, or what do i need
bbcjan 1 year ago
This comment has received too many negative votes show
send the power to what fuck face. I just dont get it you make a bull shit video talk youre ass off the whole time about what a POWER WIRE is and then you cut your video short. Again youre mom = dead
warpedset 2 years ago
are u kidding me relax. He doesn't have to do anything for you.
GT35R 2 years ago
This comment has received too many negative votes show
you are a fagget. ur videos r fuckin gay to so you cant say shit. calm the fuck down
ehbra 1 year ago
It's spelled with an "o" not an "e".
isaiah406 1 year ago
sick beak bro...
ehbra 1 year ago
are you fucking retarded. I really don't like this video. You gotta stop wasting you're fucking time cause id rather have a fat 90 year old nigger jerk my penis off then look at this video. Youre a scrub ass homo so you need to go away. And i hope youre mom dies...
warpedset 2 years ago
grow up. you sound so stupid and uneducated.
Recruit555 1 year ago
Dang, Honda Accords that year make are a pain in the but to replace a bulb I didit with my skinny white boy hand and didnt know about that air filter thing could be removed :D It hurt the hand quite bad to take it out.
200twistatwista 2 years ago
how about just taking the whole light houseing out? it takes a little more work and time but that way u dont get ur new HID bulbs dirty
fuckiraq12 2 years ago
yeah you can definitely do that. On my 325i I thought i was going to HAVE to which would mean i have to take off the bumper which would suck, except i found a panel in the wheel well that allowed easier access to the light. Removing the whole housing would definitely make bulb installation easier though
digiwolff 2 years ago
nice video
llapjani007 2 years ago
very detailed...but is it simpler to , lets say i buy the whole headlight, ( i want HID halo headlights) is it just unplugg the old one, pop the headlight in and replug everything the way it was?
PiercingTruth 2 years ago
wow how official is it to add hid's into a stock projector....most Xenon bulbs burn around 12,000 degrees Kelvin as compared to halogen@ 3,200 degrees Kelvin....this causes melting/fires/and a way to bright discharge that can blind other drivers...but dont get me wrong HIDs all the way....stronger brighter etc
paulbreor 2 years ago
@paulbreor There not even DOT approved and are illegal to use on the road anyhow
SomethingNewEveryDay 2 years ago
yea...you can pull it off if you dont go to crazy with the colors that lead towards emergencies colors....cops.etc
paulbreor 2 years ago
The Kelvin is the COLOR temperature, not the actual temperature of the bulb. Most HID's that people prefer are 5-6K Kelvin, which means a white to slightly bluish white light. 3,200 degrees Kelvin in actual temperature is hotter than the sun!
bigtoyota479 2 years ago
Kelvin is a COLOR temperature spectrum. Nice try though. Don't get it mistaken for the heat radiating off of the bulb itself.
sinnaever 2 years ago
@paulbreor LOL you dont get it do you? when thay say 3000k or 6000k or 12000k they are talking about the color temp basicaly the color 3000k is yellow 4500k is white and 12000k is purple its not the temperature as in hot or cold actually hid's have very little heat and use much less power than halogens think about it 12000K thats like the same temp at the sun LOL it will melt your cars front end off
acstechtips 2 years ago
my black and red cable dont fit to the original harness cuz i got aftermaket projectors wit different bulbs can i just cut the while little box and re wire red wit red and black wit black ?????
HIPOWERUSA 2 years ago
@HIPOWERUSA
u can do that,
just never cut the wire that goes out from the ballast to a bulb,
sircrashalot 2 years ago
This comment has received too many negative votes show
can't you just buy xenon bulbs?
WeegardNGD 2 years ago
This has been flagged as spam show
yea, this video sucks
tommyda14 2 years ago
This guy fails at how to explain things.
VraiDiouf 2 years ago 21
You fail at understanding things. =p j/k I know im not the best at explaining things... Look at my other video "Install HID Conversion Kit" it explains better
QualityHIDs 2 years ago
This has been flagged as spam show
lol ok I'll check it out.
VraiDiouf 2 years ago
Also sorry for insulting you.
VraiDiouf 2 years ago
@QualityHIDs and your the guy who said high pressure wires lmao
949dk 1 year ago
Look up Nissan Xterra HID Install. The guy in the two part video does a really good job at explaining, showing the install and the final product.
austinandrew11 1 year ago
"pull this thing out here", where im from (nova scotia canada) , we call that baffalding
JGRIFFF03 2 years ago
wow really? Don't do it....it's a trick!
punkrockporkchop 2 years ago
can i trust these websites to buy hid kits?
joshwaggoner14 2 years ago
SparkHID(DOT)COM -==- XeNoN HID conversion kit LED replcement bulbs for exterior / interior and cluster
johnnyn773 2 years ago
SO un helpful
kyaschultz 2 years ago
Hey, I think I know this guy. I do! He use to teach quantum physics at MIT!
wlombardi 2 years ago
show them the reversal process cause you're sure to get nailed by the cops for this
shipemback 2 years ago
Well, the description is correct - HIDs are better than halogens, but only when controlled properly by a HID lamp.
A halogen pattern is narrow, and has a slight amount of glare. When installing a crappy HID kit in such a light, you get lots of glare, an unfocussed beam pattern, and you get too much light just in the center infront of the car, which reduces your nighttime visibility.
HIDs in HID optics are gold, but this is NOT an improvement over halogen AT ALL!
Nicoleise 2 years ago
if anyone uses this stuff dont be a doush.
Take a little time and retro some projectors in your shit. Dont be like all the lil civics. well most lol
Other wise your loosing tons of light.blinding traffic.
silverralliart 2 years ago 21
@silverralliart what does retro mean? do you mean aim the same height than oem lights?
PiercingTruth 1 year ago
my kit dose not have a relay, so how can i install it ??
dakroury90 2 years ago
this video should be called " You'll Fuck up your car when you follow my bullshit facts :P " Fucking dumbass
kingcr3b 2 years ago
This comment has received too many negative votes show
asshole
20835 2 years ago
asshole is as asshole does... all i was saying this guy is hard to follow... and doesn't really know what the hell he is doing most likely... but then again he may know but no one knows...
kingcr3b 2 years ago 3
Additionally this is ILLEGAL in every state! And you blind everyone on the road, even some that are dropping them into their OE projectors - many are not designed to handle the amount of light and beam pattern. Plain stupid and irresponsible.
jcaimhigher 2 years ago
yep... i can honestly say on my way back from taco bell last night i was blinded by on of those projectors, it looks cool but when you get blinded by it... you know it. And i was driving a 2008 tundra crewmax, and thats quite a bit of the ground to get blinded by a civic. but i was also looking up a grade. but i agree about the road use, but for racing on a track i could see the use, i mean everyone is going the same way and not towards you. (i hope) lol
kingcr3b 2 years ago
HUH?????
gtachild 2 years ago
this guy frustrating
davidolivera4550 2 years ago 2
lmao this is horrible.... dee dee dee
S0c0J0e 2 years ago
This guys a fucking idiot, worst how to ever
7jimmyjames 2 years ago 18
@7jimmyjames how so he is very detailed and helpfull so shut the fuck up eat shit and die
jcashrednek 11 months ago
@jcashrednek Very helpful if your a complete moron, which obviously you are. Don't even respond back because I will not even acknowledge any more of your comments.
7jimmyjames 11 months ago
@7jimmyjames you obviously cant get it dont with this guys help i dont know how a dumb ass can help everyone i guess your not everyone stfu u clown go blow another rice burner
jcashrednek 11 months ago
@7jimmyjames :DDD
tomkagr33 9 months ago
This has been flagged as spam show
Hi,
the video is amazing!
If you guys needs Hid headlights let me know...=====+++++
Xenon HID Headlights Conversion system for ALL Cars, which Lasts Lifetime of your vehicle!
Get your xenon hid at sparkhid(dot)com!!!!!!!!!!!!!! !!!!!!!!!!!! $89!
andrewsparkhid 2 years ago
H 3 or H7 ?
Liberaltedjo 2 years ago
what good HID brand ?
Liberaltedjo 2 years ago
thanks for upload it but seriously.. i have no clue wat ur saying..
lilRSXs 2 years ago
This has been flagged as spam show
Hi,
how are you doing? if you guys needs Hid headlights let me know...=====+++++
Xenon HID Headlights Conversion system for ALL Cars, which Lasts Lifetime of your vehicle!
Get your xenon hid at sparkhid(dot)com!!!!!!!!!!!!!! !!!!!!!!!!!! $89!
cameroongef 2 years ago
Lmaooo you can't see what your doing so look thru the hole hahaha.
blazedxjan 2 years ago
thanks bro i feel dumber after watching that
mwarren989 2 years ago 2
You are really bad at explaining stuff.
DMNKsTWIN 2 years ago
lol@3:03 to 3:12....and the relay will send the power to..(couple secs later) This SIDE.
fellar99 2 years ago
Twist it and pull it out, turn it take it out and you stick it in and you twist it like that lol.
Thanks for the explain on the ballasts because I didn't think you could plug it in to just ONE side. No wonder it uses half the power.
Guide it into the hole
Jeahavee 2 years ago
This has been flagged as spam show
i had stock HID on my 2000 TL right now. can just buy HID bulbs on ebay and replace them?
ninhbac04 2 years ago
who cares if they are illegal they look great!!
nikkiesmokey 2 years ago
dude u suck at explaining shit!
tonceperro 2 years ago 3
LOOOOOOOL
adqc2mry 2 years ago
yeah, pretty much fail
ChrisTripp 2 years ago
This has been flagged as spam show
Just don't forget these retrofit HID conversion bulbs are illegal to use on the road in the US, Hong Kong, Malaysia, Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luembourg, Malta, Netherland, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, UK........
sleepyend 2 years ago
LMAO how do i screw in a light bulb agian?
adam3176 2 years ago
remember everybody its about quality not quantity
aroc914 2 years ago
LMAO wow alex..quality not quantity
kr3w1030 2 years ago
were can i get the harness that you connect the two wires to like you showed at the beggining of the video??? my kit did not come with it.. i looked everywhere i cannot find it
LukeBurl22 2 years ago
Wire harness will do you lots of good for $20-$25. I didn't install my kit until I got the harness for it; I just really like knowing there is something between my car and the HID kit.
HalfBreedMix 2 years ago
where did you get the harness that you connect the two wires to like he showed in the begining of the video?? i cant find it anywhere
LukeBurl22 2 years ago
Hey Luke, I just looked on ebay, and there were some harnesses there. $21 shipped.
HalfBreedMix 2 years ago
where is the full version of this vid...its cut off
taste1337 2 years ago
ive had my HID conversion kit for bout 3 months now and its ONLY my left side that, when i turn on the switch, it flickers and doesnt turn on.. i have to turn the switch on and off like 4 times before it turns on. then its fine after that. but its a bitch turning it on 4 times everytime i need them. ANY HELP???
souljahboyz 2 years ago
it looks like your ballasts are not receiving enough power to feed the bulbs, since you are probably using your stock headlight wires. I'd suggest you get a harness that will take the power right out the battery and a relay provided will switch your HID's on when you turn your headlights.
poloboy 2 years ago
can i just buy a relay harness from like autozone or does it have to be specifically for my HID kit type (9007 is for my car) ? i read somewhere you could and you can splice wires to connect to hid wiring then to battery. thanks by the way for reply
souljahboyz 2 years ago
its a sign that your ballast will be busted anytime. that what happened to before.
N20 2 years ago
I want hids on my nissan altima 06......
mpinell16 3 years ago
what year model is that car? i have a 2009 accord and it doesnt look like that.
tricky1303 3 years ago
if u cant figure out what gen that accord is do us all a favor and sell your accord your a disgrace..
autobahn415 3 years ago
Sorry I get a new Accord every 2 years. I dont waste my time trying to remember something that I know I wont have later on. Plus, they freakin change the body every 2 years. Maybe I should make a photo album for every accords I ever owned?
tricky1303 3 years ago
are u retarded? the accord had the same front end from 2003-2007, so since your mr.bigshot you've had an '07 accord and an '05 and an '03 and you dont remember the front end? odd.. i'd go see a doctor
autobahn415 3 years ago
the 2003-2005 front end and rear of the accord is different then that of the 2006-2007
Grkhockeymaster15 2 years ago
the front is almost identical. its a bigger difference between the 2003 and 2008
autobahn415 2 years ago
lol oh you're dumb
drift954 3 years ago
This has been flagged as spam show
I just got my 6000k kit yesterday from SparkHID DoTCoM, install it today, man what a big difference. LOVE THEM, WILL EVER GO BACK TO HALOGEN BULBS. Nice, Bright and clear. can see all the pot holes and speed bumps ect.... GOOD vision sparkhid dotcom
johnnyn773 3 years ago
yeah get projectors for them it looks soo much better and cool
gtcivic3 3 years ago 9
and safer!
imhungry493 3 years ago
Yay more glare. Installing HID capsules into halogen relectors is dangerous to other drivers on the road.
If you want HID, please do a real HID retro. You'll get better performance, and less drivers that hate you.
MisterBaz1 3 years ago 5
Everyone does it though lol, like every 5th car i see on the road about blinds me at night these days ;D
ninteh 3 years ago
if they blind you then it must be Halogen lights. Xenon doesnt blind. Those damn Halogens who arent adjusted right are worse.
Speedy1st 2 years ago
are you serious haha. Xenon doesnt blind?? have you driven at night while an Acura/BMW/MB drives at you. even with a projector it still blinds you haha.,. its even worse when you dont have a projector like this video
jdmjohnnyk 2 years ago
yeah im serious. Xenon CANT blind. thats proven. ppl probably think its worse cause they look directly into it cause of the brightness. And again as said bevore: if u switch those wrong adjusted headlights back to halogens its even worse. And yes i have seen a lot of those tuners, installed HID kits. Never had problems with them driving by. Really, never. But often have problems with ppl blending me, but that has always been halogen only. The only ones blendin are halo cars & trunk full of crap
Speedy1st 2 years ago
Any light can blind you. And ur saying an hid kit which produces more lumens that a halogen which is therefore brighter than a halogen cantblind you. Halo cars? Do u mean a car with projector own headlights which are properly aimed or the cheap eBay ones that use a fog light lens reducing light out put? Xenon is a gas by the way, but the light produced by the reaction blinds you.
jdmjohnnyk 2 years ago
google it and youll see it. I'm sure that there'll be enough sites who explain it to you physically. What you say just isn't true. And again i say, Halogen is always worse than xenon, no matter if they are both are aimed right or not. Thats a fact.
Speedy1st 2 years ago
Nah no need for google. I know my facts. U should try it
jdmjohnnyk 2 years ago
i had stock HID on my 2000 TL right now. can just buy HID bulbs on ebay and replace them?
ninhbac04 2 years ago
So then u confirmed that ure facts are just bullshit. Dont tell me to try it, as u show u haven't (or just won't accept it).
Don't know what to discuss, its like to discuss whats the sum of 1+1. There just is ONE answer. I told ya. Don't know wheres your problem.
Speedy1st 2 years ago
I thought u couldnt use these with reflector lenses..
Now if you're installing hids into projectors will the projectors automatically provide correct aim? Cuz i know that bad glare can be caused by incorrect aim of the light..
blackknight509 3 years ago 4
well from what i've heard, there are halogen projectors and xenon projectors. So i guess you cant put HID bulbs into a halogen projector and vise versa.
hope that helped.
asswhipe231 3 years ago
some good info, seems common sense but isn't. Thanks for the post
bcjammer 3 years ago
what kind of kind are u useing what brand
ericlwd 3 years ago
what lightbulb would fit in my civic 02 coupe? H1, H2, H3 etc..and if i change the headlights to angel eyes, would i still be able to use the same lightbulb for these?
tricolor10 3 years ago
There are kits out there that are much simpler to install, ive dealt with visionpro and Mcculloch HID systems and they are both real easy to install, but this is a good how to video too, just explore your options
CivSi02 3 years ago
Dude that's help full but how did you install Power box. i did what you did with my car Mitsubishi Lancer ES but thing is that my head light weren't made for HID's and i have no clue how to install Power box to provide more power.
Emil1787 3 years ago
Whats a power box? do you mean the ballasts?
EdiotTom 3 years ago
Yes.
Emil1787 3 years ago
confusing:S
jonathan2315 3 years ago