@mroachie That was a year ago. The car now has a 402ci LS2, paxton novi supercharger and built trans, upgraded clutch, upgraded fuel pump and injectors. check out my more recent vids for more info.
How many times have you been in your vette and wished you were in you supra. How far are you from atlanta IMPORT ALLIANCE it is in april. Looks like we hve both been working on projects. currently building a 2jz 240 drag car I plan on it being a complete monster weight goal of 2300lbs automatic. Tired of street cars. Although i keep aquiring them. looking to maybe get an old school regal or cutlass and throw a BBC in it something retarded like a 572 w/an 88mm or bigger just becuase.
@DVcustomZ I'm in Afghanistan Right now. I was on leave when I posted the vid of the blower on my Z06. I shouldn't be back until July but I will be at the fall import Alliance in TN with both of my cars.
@kageryu311 Keep it safe over there. I am building my buddy's VG for him he just enlisted at FT jackson right now. He wants 700whp DD which isnot a problem but he has an auto which is a problem. As you know that is one thing domestic did well make strong automatics where imports seem to focus on manuals. Maybe me and the wife can make it to the one in Tn. She always wants to go driving (Rb 240sx) how far from atlanta is the oe in Tn?
all you need is to take off all that stupid shit you just did to it and put the money into performance mods. what next one of those ricer airplane wings?
Total cost of performance mods: ~$3000 (headers, intake, ported throttle body, tune)
Lets not forget that I am putting a Paxton Supercharger on my car. Don't talk shit about a car you can't afford especially if you are doing 14s in your MS3. I used to own an MS3 and ran high 12s with the mods I had and ran high 13s when I was stock. Go run 14s some more and STFU.
In his defense, roughly 700 dollars could get you a cam/springs kit (without cost of labor). But yes, I think it looks good. Just needs a single white stripe down the middle to look like a legit Grand Sport.
@xZZxTakedown You need to remember corvette tax is a bitch. I paid 550 for my longtubes and X-pipe, 390 for my CAI, 200 for the ported throttle body, 210 for new valve springs, and 1200 for labor and the tune. Its more like $2550. I suck at math even though I'm a Computer Science major :P
Did you get any supporting mods for the Paxy? Like new oil pump, bigger injectors, etc? Even without that I'm pretty sure on low boost you will be satisfied lol.
@xZZxTakedown I got the ECS kit which has an MSD boost a pump, 60 # injectors ect. It would only make in the high 400s on stock fuel and would be dangerous with the type of pulley I have on the blower right now.
Its still basically stock..
mroachie 2 weeks ago
@mroachie That was a year ago. The car now has a 402ci LS2, paxton novi supercharger and built trans, upgraded clutch, upgraded fuel pump and injectors. check out my more recent vids for more info.
kageryu311 2 weeks ago
How many times have you been in your vette and wished you were in you supra. How far are you from atlanta IMPORT ALLIANCE it is in april. Looks like we hve both been working on projects. currently building a 2jz 240 drag car I plan on it being a complete monster weight goal of 2300lbs automatic. Tired of street cars. Although i keep aquiring them. looking to maybe get an old school regal or cutlass and throw a BBC in it something retarded like a 572 w/an 88mm or bigger just becuase.
DVcustomZ 1 year ago
@DVcustomZ I'm in Afghanistan Right now. I was on leave when I posted the vid of the blower on my Z06. I shouldn't be back until July but I will be at the fall import Alliance in TN with both of my cars.
kageryu311 1 year ago
@kageryu311 Keep it safe over there. I am building my buddy's VG for him he just enlisted at FT jackson right now. He wants 700whp DD which isnot a problem but he has an auto which is a problem. As you know that is one thing domestic did well make strong automatics where imports seem to focus on manuals. Maybe me and the wife can make it to the one in Tn. She always wants to go driving (Rb 240sx) how far from atlanta is the oe in Tn?
DVcustomZ 1 year ago
@DVcustomZ Atlanta is about 5 hours away from Nashville. Its not a bad drive at all either.
kageryu311 1 year ago
you have some awsome rides....what do you do for a living?? if you dont mind me asking...
jhaze918 1 year ago
@jhaze918 I shoot people for a living. LOL I am an officer in the Army. I do pretty well for myself I guess lol.
kageryu311 1 year ago
My buddy has the same car same color minus gt stripes with the STS TT kit makes 551 to the wheels does all his own tuning I believe at 6psi
DVcustomZ 1 year ago
this is like my dream car =] fuck that guy who was talking shit this car is badass as hell
Sk8FalIen 1 year ago
Your cars are badass. Nice vids man!
CorvetteRacingFan 1 year ago
@CorvetteRacingFan Thanks a lot!
kageryu311 1 year ago
all you need is to take off all that stupid shit you just did to it and put the money into performance mods. what next one of those ricer airplane wings?
bergsnizzin187 1 year ago
@bergsnizzin187 Total cost of visual mods: <$700
Total cost of performance mods: ~$3000 (headers, intake, ported throttle body, tune)
Lets not forget that I am putting a Paxton Supercharger on my car. Don't talk shit about a car you can't afford especially if you are doing 14s in your MS3. I used to own an MS3 and ran high 12s with the mods I had and ran high 13s when I was stock. Go run 14s some more and STFU.
kageryu311 1 year ago
@kageryu311
In his defense, roughly 700 dollars could get you a cam/springs kit (without cost of labor). But yes, I think it looks good. Just needs a single white stripe down the middle to look like a legit Grand Sport.
xZZxTakedown 1 year ago
@xZZxTakedown I agree. I just put that out to show him that I spent more on performance mods than visual mods.
kageryu311 1 year ago
Not to mention, 3 grand seems a lot for what you got. My longtubes/Y-pipe was about 550-650 without install.
xZZxTakedown 1 year ago
@xZZxTakedown You need to remember corvette tax is a bitch. I paid 550 for my longtubes and X-pipe, 390 for my CAI, 200 for the ported throttle body, 210 for new valve springs, and 1200 for labor and the tune. Its more like $2550. I suck at math even though I'm a Computer Science major :P
kageryu311 1 year ago
390 for a CAI >_> Wooooooooooooooooooowwwww lol. So when is the Paxy going on?
xZZxTakedown 1 year ago
@xZZxTakedown I bought it from Autozone, sue me lol. The paxton is going on right now. The shop doing the work started a day ago.
kageryu311 1 year ago
Did you get any supporting mods for the Paxy? Like new oil pump, bigger injectors, etc? Even without that I'm pretty sure on low boost you will be satisfied lol.
xZZxTakedown 1 year ago
@xZZxTakedown I got the ECS kit which has an MSD boost a pump, 60 # injectors ect. It would only make in the high 400s on stock fuel and would be dangerous with the type of pulley I have on the blower right now.
kageryu311 1 year ago
So how much boost are planning on running? 5 psi?
Oh and I'm pretty sure you will put up videos right? :p
xZZxTakedown 1 year ago
All it needs is a Turbo and it will be perfect.
vfIskullangel 1 year ago
@vfIskullangel I'm getting a paxton novi 2000 installed on it now.
kageryu311 1 year ago