Added: 2 years ago
From: QualitySimulations
Views: 90,207
Sort by time | Sort by thread (beta)

Link to this comment:

Share to:

All Comments (85)

Sign In or Sign Up now to post a comment!
  • This funny little man will kill you an range.......

    

  • Hi Jamboy,

    I only assembled the parts that came out of the box, not hard at all,

    but you need some technique to string the bow, or else the effort is

    great, to do it right lean the whole rifle on its side, one tip of the bow

    touching the ground, hold the other in your hand and pull towards you

    as the butt of the rifle is pressed against your hips, this way you can

    control the force on both sides of the bow evenly, then you put the string

    on the upper end.

  • I shoot, practically, the same crossbow accept I use the sights on top of the crossbow instead of a scope. This makes is more difficult to aim but I can make comparable shots. Also, I span or cock my crossbow by hand and without a stirrup. I do this by setting the butt of the stock on the ground and pressing on the string till it fully cocks/spans. Takes more strength to do it but you can shoot much faster. Nice video but wish the sound was better.

  • did you assemble it? if so how hard was the assembly

  • could this kill a bird/rabbit/squirel?

  • @isaacdylansainz bird/rabbit/quirrel/deer/antel­ope!

  • TERRORIST!!!!

  • hi QS. Thank you for your answer, i'll make it fix right away :)

  • Hi Denny,

    Had a similar problem with my crossbow pistol, the cause was the string passing over the bolt, and not hitting it in the groove.

    the solution is the tighten the small tab that guards the bolt, the tighter as it will be the more accurately the string will hit the bolt.

    Also you can purchase a replacement bow ( just the fiberglass bow) it costs peanuts and will restore your rifle to full strength for sure.

  • Hi, i got this one too. Kinda old, i bought it 10 years ago. Actually still.in agood shape right now, but it sometime it failed to fire the bolt. The bolt fired actually, but not in full power. Could you give me any solution? Thank you

  • Yes, it is possible to cock it with hands, it is not too difficult but the accuracy of the shot gets worse because by hand you are not cocking it with total symmetric loading on the wires on each side, so this tends to kick the arrow a bit to either side.

    I finally got to the point where i had one arrow at the tail of the other destroying them both, it was that accurate. ( from 10 meter distance not from 25 like here ).

  • is it possible to load this crossbow with just the hand?? i mean without ropes and stuff??

  • the longest bong hit in background!

  • How the hell do you pull the string back to the loading part. Ive been trying but i keep getting stop and the string won't go any further once it reaches there loading part????

  • Crossbow very nice.

  • Hi aweornae,

    there is not much recoil, you feel the bump but it is nothing compared to a gun or a pictol.

    But when you shoot the crossbow you have to be very still, and also the way you cock it has effect on the accuracy of the hit, so i used the hand cocking device which i built, i can cock it by hand but then it is not so accurate,

    I got to shooting it so accurately that on some occasions i got one arrow exactly at the end of the other ( spoiling two arrows at the same time ;)

  • Irony, this is the exact crossbow I plan on buying from budk.com! That's pretty funny, I just looked up 150 lb crossbows cause I was wondering what the recoil looked like, and I accidentally click the video containing this exact crossbow.

  • *guy walks around corner* "hey whacha doin.. *thack!* AHHH!!"

  • Are you preapring to shoot that nosey? It looks like it. I dont blame you.

  • nice bb gun scope

  • Very Professional....thanks for the review....its the wooden jaguar...right...???...

    I consider buying one....for the kids....its cheap...89 Euros....

    with diopter, bolts, boltcase.....very cheap for a good weapon...

    I consider it a property-defense-weapon...nice range....accurate and deadly...

    I love it....

  • PLEASE ANSWER BACK! What sight is it? is it good and how much does it costs? Thank you very much

  • Is this a Mankung product?

  • I got the same xbow... very happy with mine for the price - cheap! (£75)

  • i think slender man is nearby

  • i have this exact crossbow (but in woodland camoflauge :3) and as a warning,this bow may seem weak because of its price,but i shot the bow at 120 yards,and my freind said he saw a tiny bit of smoke after the arrow hit the target,i also smelt a little burning of the rope.This bow is so strong,u hear the sound of the hit before you feel the recoil.thats how fast it is.

  • Somebody here is taking an immense toke in this video

    

  • from what is your target made of? everything I made is crap, arow goes straight thru or i cant pull it out...

  • i don't believe in using assisting straps.

  • i....im ...scared

  • ahhhhhh!!!!!!! distortion!!!!!!! SLENDERMAN IS THERE!!!!! DUDE! GET OUT OF THERE!

  • @glennkon what's slendermen?

  • where did you buy it?

  • MAAAAN!!!! You have NO chance against my trained squrel!

  • Nice video and nice shooting. Thanks.

  • cool did you film this underwater?

  • Did you use a rest to sight it in, or did you sight it in off hand? Nice video.

  • So this doesn't seem particularly useful for my ninja assassination missions if I have to pull out that cocking device every time I want to fire.

  • סירטוון גדוול גבר, רק מעניין איפה אפשר להסיג אחת כזאת

  • has anyone figured out how to mount a quiver on this thing? i have a similar model and i can't find any mounts for it. what are those four holes for above the foot stirrup if there are no mounts that fit them? if someone has a way to mount a quiver on theirs please tell me.

  • Nice Video, just ordered a crossbow myself. Can't wait to shoot it.

  • I have made this simple pulley, it was made of nylon string

    approx 5 mm thick and 150 cm long, with two hooks with an eye

    on the other side, the grip handle was made of a plastic bar of 2 cm diameter.

    Later when I got used to pulling it ( 150 lb at end of pull ) i no longer needed this pulley.

  • please give me link to the pulley system

  • 1 fucktup microfone

  • dose every cunt with a cross bow need an hour long explanation FUCKING SHOOT THE CUNT FUCK!!!

  • i have the same exact crossbow i only fired it 2 times the arrows got lost and broken, does your arrows get any damage when they hit solid things?

  • Nice bow lefty!

  • its simple, use the cheapest scope you can find, my crossbow came with one in the box, but any scope for bb gun will do just fine and cost less than 10$

  • hi man! i got the same crossbow today. but without a scope. can u tell me what to look for to know if a scope would fit? thank you!

  • i saw that crossbow at a flee market for $150.00 i wanted it bad

  • oh my god he is a terrorist! see you next week in berlin xD

  • this guy looks dangerous lol

  • thats a fucking long toke

  • Queo comprar uma balestra dessa

  • was sombody constantly using a bong thru this vid

  • Yes, now i charge by hand and it takes like 10 seconds, this movie was made before i realized i can charge by hand, i was influenced by seeing my friend charge a 250 lb crossbow with a similar device.

  • lol you need like 1 min just to recharge??? o man that can be easily charged with just hands lol i charge that in 10 sec:))))

  • thanks awfully for that data, I shoot Korean Hwarang bows with Thumb Ring, but always wanted to try a modern style xbow

  • Comment removed

  • Yes, i have made this simple pulley, it was made of nylon string

    approx 5 mm thick and 120 cm long, with two hooks with an eye

    on the other side, the grip handle was made of a plastic bar of 2 cm diameter.

    Later when i got used to pulling it ( 150 lb at end of pull ) i no longer needed this pulley.

    The main problem of this crossbow is the trigger mechanism, i had to take it apart and chaff some parts to weaken the trigger forces, after that the accuracy was much better !

  • Nice video, I just ordered the same bow. I do hate the para military looking ones, that nice wood stock attracted me. That pulley, thing, did you buy that or make it? If you made it could you provide details?

    Thanks so much :)

  • arrggghhh!! Whats that sound?!? My brain is slowly turning to mush! :3

  • wooohohoho, lefty!!! all rifles, guns, bows, etc, are made to be shot right handed

  • I've got exactly the same crossbow but with a bigger scope, but I'm having trouble zeroing it in. Anyone have any tips? Oh, and I accidentally missed a target and the bolt flew roughly 100 ft up a entry and embedded itself in a wheelie bin. I would imagine it would have passed through a person.

  • Hi,

    You are right, there is a problem to zero/calibrate it, several factors

    contribute to it : the trigger mechanism is very cheaply built, resulting in

    high and unexpected trigger forces, i had to take the trigger apart and

    chaff some parts in it to make forces smaller ( less than 3 lb ),

    the other factor, the scope i use doesn't handle shocks too well, so

    it may lose calibration from time to time, my advice calibrate at extremely low

    range at first then increase range until you are confident.

  • i took out a pidgeon the other day at about 30 yards, it managed to fly away with a bolt through its body.

  • y so dam loud?!!! im thinking about buying this bow and my last one was so quiet

  • @mattyg400y He's surounded by walls(echo).

  • great video man, I have the same crossbow:)

  • i have armex crossbow in coma paint work and boy its powerful. Yep it can kill some one at 60 yds never mind the 25 yds there. The only draw back on this type of bow is the foot stirup, it hangs low and makes it end heavy, so i put a clip on mine so after cockin i swing it back under the body and it is out of the way while shooting. How long was your cocking cord and what did you use to make it. Great video. By the way you can make your own bolts really cheap.

  • I have the EXACT same one, accept I changed the LIMB to a barnett, and noticed the power stroke (string, to where its supposed to be cocked) a little shorter now. 9inches or so. I recall with this chinese crossbow, it was another 1.5 -2in (so 10.5-11in total)

    So a loss of power for me. Can you compare/measure the crossbow you have, to compare the difference? thanks

  • can you kill someone with that crossbow? im not going tho :P just wondering

  • LOL a 150lb xbow would go right through a guy, then hit another guy, go through him, then another guy and keep going go through solid steel, and then slow down and get stuck in a concrete wall after burying 6 inches in it, so yeah does that answer you question? X-D

  • @scottishkiwi23 dude thats bullshit i just watched a video before this by weaponcollector, he has 150lb crossbow and its just managed to go through 6 full bottles of water...how will it manage to go through 2 people, steel and 6inches into concrete, oh and the bolts never went ALL the way throughg the bottles...... -.-

  • @scottishkiwi23 that is the most retarded statement of the century

  • @scottishkiwi23 wow that shows how idiotic you are 

  • @scottishkiwi23 What would be the optimal range for taking out my ex and her new bf?

  • @scottishkiwi23 what? are you serious?

  • @scottishkiwi23 haha nice exaggeration 

  • haha yeah you can i have the same

  • Sound quality is really low.

Loading...
Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more