X-can Rev

[superballer365]

@PrestonWolff09 would you mind telling me the bolt spacing on the exhaust? I need to know if it will fit my engine, thanks.

[PrestonWolff09]

@superballer365 i have no clue man. this video is old and i no longer have the goped. i'm sure you can look up the specs on the website

[couldntfinduser123]

hey i weigh like 105 lbs and if i get the x can exhaust how much faster will my gas scooter go. i need to kno b4 i buy it. thx alot

[PrestonWolff09]

@couldntfinduser123 do you have an s25? i noticed a lot of lower end torque with it. it may only increase your top speed by like 1 or 2 mph... but you will get there a lot faster than before

[iPhoneElite8]

hey..i just got an x-can and it wouldn't fit right on my engine so I installed it upside down...it looks like yours is upside down too..My question is does it effect its performance if the x-can is upside down?? i really need an answer before i go out and ride it..Thanks dude

[PrestonWolff09]

no there is really no difference in performance at all. but have fun riding! oh and don't try to do wheelies or stoppies if you don't know what you're doing.. THEY HURT! (i'm speaking from experience)

[iAmped7]

did yu like the xcan ? nd wat otha mods do u haav on thatt ?

[raplamaster03]

how do u like the x can?

[MrPogi87]

God i miss riding. I had the X-can too. The sound is awesome on full throttle.

[PrestonWolff09]

haha yea they are fun little things. and now i have a funner bigger thing XD but i still use my little scooter for the street. when its running. unfortnately its not right now =/

[devildevilparty1]

have u tried adjusting the rear tire..?

just a thought lol

[1994camaroz28]

Nice ped. I remember my G23orc sport...had a .950 spindle and full boltons. That thing did 30++ with a 190 lb person. Tons of power from a small engine. What are your plans with this one?

[PrestonWolff09]

ummm dunno. maybe save up and get a xped conversion or something so i have a better motor to work with

[SNOOPDOG0707]

did you have a 3rd bearing on your ped?

[1994camaroz28]

Yes a 3rd bearing is a must with so much weight! My ped before the g23orc didn't have a 3rd bearing and ended up with a bent crankshaft, of course i didn't know this until my dad saw it, which was way after the paypal payment and such. I didnt buy it local.

[SNOOPDOG0707]

i wouldn't get a spindle bigger than a .800 because you will loose performence with a sport ped

[1994camaroz28]

Why you say that snoop? If you have the power i dont see a problem. A g23orc w/ full boltons has way enough power IMO.

[4x4JEEP4x4]

lol brap brap! whats it top out at?

[PrestonWolff09]

haha. dunno but i just got a dirt bike so i'm gonna get rid of it. i'm guessing around 25mph

[gped428]

does that have a clutch on?

[PrestonWolff09]

no. if you read my description it explains why the tire isn't spinning. we still haven't figured out the problem and my bro in law got me a yamaha yz 125 so i thing i'm just gonna get rid of it.

[Bonerjams4life]

is the x-can good for a s25 im thinking bout getting an x-can or a pipe

[PrestonWolff09]

well we chose the x-can because it's waaaaaayyyyyyyyy cheaper than the pipes.

[Bonerjams4life]

yea thats what im thinkin bout getting thanks

[SNOOPDOG0707]

its about $40 cheaper and you get leg burns with a pipe. anyone you rides dirtbike knows what that feels like. im getting an x-can, how much more speed do you get from the x-can?

[BMXR10]

2-5 mph depending on what you get and what spindle you have

[SNOOPDOG0707]

not 5 mph, because a pipe gives you 5 mph. so a little x-can isnt going to give you 5 mph no matter what spindle you put on it. id say 2-3 mph

[PrestonWolff09]

i know what you mean about the leg burns. i have a yz 125 and if i'm not wearing pants or anything i have to stick my leg out or else i will get leg burns

[coltondip10]

is that the stock motor, i forgot?

[PrestonWolff09]

yes its the GZ25N14

[alexcandy1411]

What engine is that?

[PrestonWolff09]

Gz25N14