Hey can some one help me I am just a poor 15 year old kid who always carrys a knife not to show off but because i have had many different jobs that require me to have a knife, I am looking for a good sturdy folder thats not too expensive but is nice looking to add to my edc setup i really don't like the skeleton type knifes i just want a solid looking knife just a single blade, some one please help.
@jaredef dont think Ill review my fleshlight...and certainly wont be trading it, lol...dont know anyone who would be interested in one already used...
hey jeff , i have a cheap flashlight with a turning switch on the back . it annoys the hell out of me, so can you make a tutorial on how to make it a click switch?
FYI: It is called a Spanner head or Spanner screw. I have made these out of cheap snap/retaining ring pliers, heated them up and bent the tip for the application. Remember when you heat up tool steel you F-up the hardness so go to the cheapo rack and buy a $2 pair that you don't mind tossing when they break. It makes doing Diy projects much easier. Great vid! I'm new to flashlight mods...how about showing how to do an emitter/board upgrade?
DONT READ THIS Cause It Really Works. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT TO AT LEAST 3 VIDEOS YOU WILL DIE WITHIN 2 DAYS. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS OVER TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY Cuz IT ACTUALLY WORKS THIS reaLLY WORKS
I couldn't make it out in the video, but if the plunger on the inside of the tailcap is too long, you can cut down the excess (turn it inside out to get at it) and reduce how far it'll stick out of the tail when reinstalled. It's only there to add height to the switch.
some people dont like when people state the fact they posted the comment 1st, I persoanly could care less, but thats why peopel are rating your comment bad,...
This has been flagged as spam show
Hey can some one help me I am just a poor 15 year old kid who always carrys a knife not to show off but because i have had many different jobs that require me to have a knife, I am looking for a good sturdy folder thats not too expensive but is nice looking to add to my edc setup i really don't like the skeleton type knifes i just want a solid looking knife just a single blade, some one please help.
danthedark96 4 months ago in playlist More videos from cutlerylover
Wonder who owns this light now?
QualityKnives 11 months ago
what is the sound tht happened in the background
brandon14872 1 year ago
WTF, I was looking for fleshlight not flashlight!
jaredef 1 year ago 3
@jaredef dont think Ill review my fleshlight...and certainly wont be trading it, lol...dont know anyone who would be interested in one already used...
cutlerylover 1 year ago 3
@cutlerylover you reviewed that "mitten" but won't review the fleshlight??? I NEED TO KNOW A GOOD BRAND!
KHRSace 1 year ago
where do you get these caps?
TheSuperhack3r 1 year ago
hey jeff , i have a cheap flashlight with a turning switch on the back . it annoys the hell out of me, so can you make a tutorial on how to make it a click switch?
thanks
theTicklemehellmo 1 year ago
Nice!
tecnolover2642 1 year ago
i want that
nmooney151 1 year ago
you can get a 12-led bright ass fukin flashlight at things4cheap(dot)com
or one of those jetflame butane lighters that burn at 1300c lmao
KiddinK 1 year ago
Comment removed
guy4066 1 year ago
@guy4066 pretty original comment Im sure your the coolest kid in the 7th grade
cutlerylover 1 year ago 21
@guy4066 u suck!!!
MrUto12 1 year ago
nice, ordered several colours at dealextreme.
target007 1 year ago
where do you get glow in the dark switches
mcobb33070 1 year ago
can anyone of u guys tell what the diameter of the tailcap is?? :-? thanx
njaln 2 years ago
i live in australia and have been buying from dealextreme for a long time now, and it only takes about a week at the very most to recieve stuff!! =D
ps. love ur videos!! (especially the ones about knives and guns =D)
DaRealMistaSandman 2 years ago
haha yet again the clock XD
lonnythedonny 2 years ago
boring
hectbp 2 years ago
FYI: It is called a Spanner head or Spanner screw. I have made these out of cheap snap/retaining ring pliers, heated them up and bent the tip for the application. Remember when you heat up tool steel you F-up the hardness so go to the cheapo rack and buy a $2 pair that you don't mind tossing when they break. It makes doing Diy projects much easier. Great vid! I'm new to flashlight mods...how about showing how to do an emitter/board upgrade?
BerettaM9USAF 2 years ago
FINISH HIM!!
RuNeSCaPeR133 2 years ago
kind of an intense opening. Mortal Kombat!
toothANDclaw13 2 years ago
can you make a video of an mre??
mralexk123 2 years ago
MORTAL KOMBAT!!!!
parksy6908 2 years ago 5
Fenix is so hard..
TechnologicMe 2 years ago
How much mm are tailcaps from fenix?
TechnologicMe 2 years ago
you should of turned the lights off
bushcraftbaird112 3 years ago
This has been flagged as spam show
DONT READ THIS Cause It Really Works. YOU WILL GET KISSED ON THE NEAREST POSSIBLE FRIDAY BY THE LOVE OF YOUR LIFE. TOMORROW WILL BE THE BEST DAY OF YOUR LIFE. HOWEVER IF YOU DONT POST THIS COMMENT TO AT LEAST 3 VIDEOS YOU WILL DIE WITHIN 2 DAYS. NOW UV STARTED READIN DIS DUNT STOP THIS IS SO SCARY. SEND THIS OVER TO 5 VIDEOS IN 143 MINUTES WHEN UR DONE PRESS F6 AND UR CRUSHES NAME WILL APPEAR ON THE SCREEN IN BIG LETTERS. THIS IS SO SCARY Cuz IT ACTUALLY WORKS THIS reaLLY WORKS
rocville6969 3 years ago
haha your clock does the music in a lot of your videos
ClaynimationMan 3 years ago 4
I think his clock goes off every fifteen minutes. He has one 17 minute video and it goes off twice.
deatheatre 3 years ago 6
now to know that you must be a real fan boy, same here man!
BerettaTM 2 years ago 8
yes it does. he has a video just about the clock where he talks about it
airrune31 2 years ago
pretty cool. ^_^
bladesypher 3 years ago
were do buy O rings at
Llight37 3 years ago
home depot or other hardware stores
FrameFitz 3 years ago
You can also get O-rings at DX if you don't mind waiting on shipping, same as the tail caps. You just need to know the diameter, in metric.
morefrills 3 years ago
I just reverse pulled out the old button, and put the knew one back in. No screwing or anything.
pingpongme 3 years ago
MORTAL KOMBAT!
AGeRMaNPrOxZ 3 years ago
i never knew dealextreme was in hong kong...
ERCCRE123 3 years ago
This also works with my Ultrafire c3 cree flashlight!!! THANKS :D
peder95 3 years ago
Fasinating!
Imasofat 3 years ago
I couldn't make it out in the video, but if the plunger on the inside of the tailcap is too long, you can cut down the excess (turn it inside out to get at it) and reduce how far it'll stick out of the tail when reinstalled. It's only there to add height to the switch.
morefrills 3 years ago
were is the best place to buy a led flashlight, walmart or target
Llight37 3 years ago
It's not really the place you buy it's the brand you buy that matters.
Krepo11 3 years ago
neat. now i just need a cool flashlight lol
kevin2155boe 3 years ago
Im sure you all can calm down now. I just commented all the comments "BAD" just to justify the equation!
lolzzz
PaulusTheMisionary 3 years ago
awsome ! 5/5
matrixismyname 3 years ago
cool!
thanks again for sharing the knowledge you have!
5/5
eonXboX360 3 years ago
Nice video. I might just have to get a nice flashlight and try this myself.
ShadowsOfMisfortune 3 years ago
lol I knew someone woudl comment on the song, hahaha...
cutlerylover 3 years ago
mortal combat
hgausch 3 years ago
yup! you know your MK!!!!
cutlerylover 3 years ago
@cutlerylover
wouldnt it be MC?
Chun1ify 1 year ago
Comment removed
eventer289 3 years ago
m k nice
Hissatsu5 3 years ago
were do you get the caps?? thanks
ApacheGuyDude 3 years ago
watch the whole video he says at the end.
Geebuv 3 years ago
ha! nice idea, i love making somthing personel.
mecrazy5 3 years ago
nice never thought of that
XxhilfmirxX 3 years ago
cool
MasterofDisaster17 3 years ago
cool, some glow in the dark would be very handy, wonder if i can do this on my surefire E2L? hmm
nice vid
Izhmash47 3 years ago
yes alot of guys mod their surefirs too, I dont know offhand how to get the rubber bott out and the enw one in though, reffer to CPF for more info...
cutlerylover 3 years ago
5/5
sk8erboyz1 3 years ago
Nice vid
akerlund92 3 years ago
nice!
CrialCrial 3 years ago
This has been flagged as spam show
great vid 5/5 and first!!!!
ipodtouchmaster06 3 years ago
This comment has received too many negative votes show
now im first
fluffythedestroyer11 3 years ago
hey guys why are you rating my comment bad?
ipodtouchmaster06 3 years ago
This comment has received too many negative votes show
cause your a fag. -2
hgausch 3 years ago
some people dont like when people state the fact they posted the comment 1st, I persoanly could care less, but thats why peopel are rating your comment bad,...
hgausch, please be nice...thanks
cutlerylover 3 years ago
sorry bro
hgausch 3 years ago
its ok, just dont want name calling, I dont think he new why peopel were mad in the 1st place....
cutlerylover 3 years ago