My PSP Case Mod!

[rheantot14]

how to put light in psp? pls help me?

[digitalbeard123]

Nice

[zach3493]

pretty simple. put some sound reactive leds in it or something. It only takes a few minutes.

[Sibobby1]

@zach3493 already done, uploading the video in a bit.

[mojomccoyman]

Very cool

[Sibobby1]

@mojomccoyman Thank you :D

[justinpiu]

can u show us how to disassemble it ? plz

[taymonty1]

just search youtube , i searched replace psp screen , when my screen was broken , n it was a good tutorial (one of the first vids that comes up , goes for bout 7 mins..

[Sibobby1]

@taymonty1 Yeah I would suggest doing that, right now, I have a nice camera but I'm still experimenting with it, I'll be making many videos in the near future.

[justinpiu]

@taymonty1 thanks but my screen didnt brake it was the thing that connects to the little flap thing

[Sibobby1]

I think you mean the orange thing, that's called a Ribbon cable, and it goes in to the ribbon cable connector. Just trying to understand you haha.

[rayman1014]

yeah i suck at modding my psp im gonna hire a professional

[VIPER720DD]

cant see shit on the psp screan

[Sibobby1]

@VIPER720DD I know, It just showed i had custom firmware; nothing to be seen to be honest :P

[VIPER720DD]

oh thats preaty cool i also have a custom firmware on my psp i think its 4.01 m33 or something like that

[HHRB0664]

OMFG that is f*cking sexy. Where could I buy one like that?

Also, since you obviously know your way around the PSP, would it be an easy task to remove the glasslike thing in front of the LED screen to remove a piece of dust that got behind it? Just send me a message. KTHXBAI

[Sibobby1]

Hey man whats up, thanks a lot for the comment :] Read my decription for the links etc, the case is 17$ Free shipping to US. and for your problem... you couldn't remove the plastic infront of the LCD (Liquid Crystal Display) (Not LED - Light Emitting Diode) you would take off the faceplate, which is just 5 screws on the Fat PSP (1000), 7 (i think) on the Slim PSP. Visit my Profile, for my messenger accounts and I can assist you further, Thanks :]

[demetriarule]

how long did it take to come?

[Sibobby1]

the case? a week or 2 at most.

[demetriarule]

you mean after it was shipped it took 2 weeks, or when you order it, took 2 weeks

[Sibobby1]

From when i hit BUY NOW or CHECKOUT it got to my doorstep 1.5 - 2 weeks AT MOST to be in my hands. it is sent out from Hong Kong

[alexbishop94]

i'm getting mine soon! is it hard to put it on?

[Sibobby1]

Ehhh you get used to it, look around on youtube for some nice video tutorials, I know I seen one nice one, pictures, really clear with annotations.... Make sure you have a nice screw drive with a sturdy handle not to strip screws, and yeahhh My suggestion, Have cups or bowls to put the parts in sequential order, so you can jut go backwards to instal, and you won't be missing screws :)

[alexbishop94]

yea ive had experience with removing stuff, i just don't want to break any wire's or anything.

[Sibobby1]

to be honest theres......7 wires in PSP total haha your not gonna break any of those :P

[alexbishop94]

alright thanks for the look out.

[Sibobby1]

Most important things, ribbon cables, etc, I broke a Backlight AND Data LCD Ribbon cable connector on the motherboard, AND somehow the power fuse blew so it didn't charge, but i changed that with my USB Charging mod... Yeah I bought a new PSP from a friend and yeah, all good now, I wanted to do a mod and complete it by the 31st (LEDs) but It wasn't required (Originally for competition) and yeah, I couldn't go (Changed rules) so yeah.

[alexbishop94]

thats what im worried about is the ribbon cables you can't just solder back on. so if i take the back of the casing off do i have to worry about terring any?

[BIYAO3]

Oh gosh...not bad=) I want that battery=( Where did u bought that battery from?

[oRAYBOo]

i ordered that from DX, oh how long did it take for yours to ship to your house?

[gabrielstangel]

i got the same mod front and back clear

[kitteds]

This is awesome nice psp dude!!

[dotaboy3892]

omg nice psp man that's crazy i got the madden 09 limited edition

[Sibobby1]

Congrats man, Thanks very much for the comment, Currently have a problem with it, I broke an LCD motherboard ribbon cable connector, and yeah, its like 5-7 pins, its gonna be hard to fix, I'm gonna try to throw some strands from inside 22 Gauge kynar wire and try to solder it, although its a .5 millimeter pitch, which is tough, getting a pin point soldering iron soon and stuff, so that will all be good, if not, I just bought a PSP 50$, ill have a set of replacement parts ^_^

[l33tmad]

oh shit i didnt see the bottom! nice

[Sibobby1]

Yeah, thanks dude, my friend had me install just the faceplate so I didn't have to take everything apart :P Anyway, 17$ for the whole case @ Deal extreme + Free Shipping (Link + info in description) And yeah, maybe you should try the Full Case mod, buy the backplate, get that screw driver, get some bowls, a bright lamp, a laptop w/ tutorial, and go for it dude! :D Anymore help, hit me up

[l33tmad]

your psp is a fat right?

[Sibobby1]

Yeah Fat PSP :P

[l33tmad]

hah, i have the same faceplate... how much did you buy yours?

[larrymcman]

Thanks for the help and support I will message you if I have any further questions.

[larrymcman]

Thanks I have been looking around for about a month for a full clear replacement case and all the sights I found were either too expensive or a bit shady. My question to you is how long was the shipping?

[Sibobby1]

Shipping came from Hong Kong, took a couple of days, but it arrived to my house, no scratches, damage, buttons in a new plastic thing, protective screens over the inside and outside of faceplate, and he signed it confirming it wasn't damaged when it left the place ;o I'm happy with it and the price was great :] I'm from the US so 17$ For a clear case, free shipping. Cool :D Good luck dude, message me for any more detail or help

[tropa619]

THanks men..!!

[MuzICL0VA2007]

This video is soo kooll!!! And thanks man u helped me ouut with everything about opening a PSP and getting the nice Deal Extreme case!!!

[Sibobby1]

Your welcome, Good luck, you have my MSN if you need help. Thanks for the comment.

[juuso8989]

dealextreme case?

[Sibobby1]

Yeah, Everything with Deal Extreme worked out fine... 16.95$ For the Case Free shipping to New Jersey where I'm from.... It came from Hong Kong, They sent me the buttons and the home bar in excellent condition, and the case fit well on my PSP... everything was perfect. :] If you want to get the case the link is in the description, and I highly recommend it. :D

[lhonduron]

it would be nicer if you change your lyts to sound sensitive leds and let the r and l buttons glowing...

[Sibobby1]

Lol I don't have lights in my triggers yet, and do you know how hard it is to take everything apart, solder the speaker + and - to the LM386 chip, then the chip to the ground on the motherboard, then the + from the battery to the input on there... then the output to the 2 LEDs on the triggers which have to be SMT (Surface mount) and I have to drill a hole in the trigger and put the small square in there, and then put everything back together, takes like 6 hours trial and error...

[Anukad92]

nice nice^^

[Gaiaseven]

whoa...nice rob ^^