@rainbowsnbubbles There is a 1/2 inch gap between the spinning plate and the tub. The feathers simply fall under the unit, after about 75 birds I need to move it.
seguradojr - The motor spins at 1725 attached to the 2.5 inch drive pulley the belt drives a 10 inch pulley attached thru a front wheel drive car bearing assembly to the plate making the final drive 431 RPMs.
Seams like a huge waist of water. We are in a desert, so using water like that would be my only concern. We either skin them or pluck them by hand here.
>then cut the thighs off after popping the hip joint and finally filet off the breast, making them boneless skinless breast.<
If you're going to produce skinless chicken breasts, why not just skin the chicken in the first place? that's faster than even a chicken plucker. The skin's the best part anyway!
@sagehilll The plucker not only removes the feathers but the dirt as well, trying to skin a chicken is hard with all the feathers getting onto the meat. I do agree the skin is needed for the wings legs and thighs.
If its not too much trouble, could you also email your plans on how you made this to me please at 76louise@gmail.com. It took my other half an hour and a half to pluck one by hand, we are amazed that your plucker reduces the time to about 30 seconds!!
it seems like you get alot of requests for those plans it wouldnt be a bad idea to upload them to mediafire or some kind of file hosting site and have it run through adfly and make a few becks its not alot and the people who want it wait 5 seconds and then click skip ad and youve made a few cents :D
Hello - I left a message here a couple weeks ago. I would like a copy of the plans to build this too, please. dawnb52 at g mail dot com This is great.
Looking at building one. We don't process 30 at a time but I still hate plucking them. The wings are the worse. Probably 10 at a time around here. Thanks for the info.
@dixdox62 You flip it on its side and scrap and rince the feathers out, after about 30 birds I remove the feathers if doing many birds. Then when I'm done for the day I rinse the tub out with bleach. Surprisingly there is very little mess, when seperating the chicken, I cut the wings off at the shoulder joint, then cut the legs first at the knee joint then cut the thighs off after popping the hip joint and finally filet off the breast, making them boneless skinless breast.
Well you probably never thought you would get such a great response from your plucker:) I would appreciate the plans if you wouldn't mind. Moises@moisesmorales. Com thanks.
The fingers were model C 25 from w w w dot kent -company dot c o m factory direct from Kencal Rubber 3545 Normal Av Chicago Il 60609. To me looks like they changed names to w w w dot calumetrubber dot c o m
HI, can you also send me the plans as well? I would really appreciate it! my email is: savenursecrissy@aol.com also was wondering what temp and how long to scald first for chickens and turkeys? I can't seem to get it right and keep hearing different temps. thank you for your time!!!
I've ripped off you're idea,and incorporated it into a small dog grooming business..They generally can walk in a straight line after about an hour..If not i blame it on the shampoo.
Hi there!!! We are scratching our brain as how to make this!!!! You did an awesome job!!!! Could you please send us the plans???? Our e-mail is shouldbhunting@gmail.com Thanks so much!!!
This is the best idea I've seen so far in researching building a chicken plucker. Now I have a reason to keep the old washer when we get the new one. May I please get a copy of the plans as well. Thank you so much!!! Lorywd@gmail.com
Wowwwwww!!! amazing...Sir, can you please send me the plans and details on how to make this amazing chicken plucker? please please please!!! please send it to graveyard_disciple888@yahoo.com.ph
It would be awesome if you could send me the details on how you did. i have a spare washer right now and do alot of turkey hunting.it would be very much appreciated.rlagnew@sympatico.ca
this is the coolest thing i have seen on youtube can you send me plans please.
we have alot of chickens comming up to dress. really need to know how to secure the bottom plate to something solid to run the motor. the plans would be greatly appreciated. spooonie_01@yahoo.com
Hi, great job with the chicken washer. I would like to attempt a chicken washer of my own, could you please send me a copy of the plans? kyfishguy@yahoo.com
this is just what I need. Could you please send me the plans. I REALLY want to build one with my 14 tear old son. mt e-mail is hellboundhillbilly@gmail.com thanks Todd, Awesome simply awesome better than a whizbang
Wow this is awesome! I would also love a copy of your plans if possible? I have about 150 chickens to be butchered in 5 weeks, this would really help!
Love it! I am sure you are bombarded with requests, but if and when you have time, could you send me a copy of the plans? My email address is RachelDazy@gmail.com Thank you so much! This is AMAZING! When i was a kid, I WAS the chicken plucker!
i love this. some people are just natural at thinking outside the box. i would also like a copy of your plans, it just so happens that i just put my washer outside a week ago because it was leaking
@pzlr0v Would it be possible to get a copy of your plans, I have about 150 chickens to butcher in about 5 weeks and this would really help! Thank You Tina
Hey there. Amazing video. Any chance you can send the plans for this amazing machine? My email address is benjamin.j.finn@gmail.com. Happy to build a website for you in return to advertise this machine to the world.
I see you are pretty popular with your chicken washer! If you have time would you send me the plans also? I would appreciate it. Thanks for your creative thinking!
Hi this is genius. I really need something like this i have to hand pluck 75 birds every two week :(. can you send me plans to nekromad@gmail.com thanks
please send plan to iamdlogan@yahoo.com...this is the best video I have watched...will save me and family days of time...thank you so very much...can we send a cash donation? iamdlogan
Great machine I also would be interested in plans. I have the washer already and am wanting to get up and running for the summer. My email is eric1swander@gmail.com I would greatly appriciate the plans for this awesome machine. Thanks. Eric
Really like the way this looks and works. We raise turkeys, chickens and broilers. the pain has always been in the plucking. Could you send me a copy of the plans for this? My email is petem@satx.rr.com
@longtail4711 send me an email account and Ill send you the plans, Yes I used a 1725 RPM motor, and yes I have an video on youtube with a Turkey in Chicken washer. Thank you for looking.
@MrMarcusx9 The feathers go underneath, so you simply lift it up after about 40 birds and shovel the feathers. I wash it with bleach before and after each use for safety. It works really good. We had chicken tonight for supper.
@MrMarcusx9 The feathers go underneath, so you simply lift it up after about 40 birds and shovel the feathers. I wash it with bleach before and after each use for safety. It works really good. We had chicken tonight for supper.
My husband loves this but needs help with building one...! An awesome project...thanks for sharing...If plans are available can you send them to dara.design@sympatico.ca
okay so i see here that everybody wants your plans and ill admit i want them also but hey how about i want your washer? if you are interested in helping out a hand plucker salmonslayer1991@yahoo.com is my email thanks!
Love the idea! Just did 45 yesterday with a drill. It was not bad, but my arms and back are sore today. Could i also get plan? send to jer2911ym@yahoo.com
I was hoping you could send me the plans to this to nicbouwes@gmail.com. I got flagged as spam but I am really interested in building one of these. I ordered the fingers and got a used washing machine. It looks as though you fix the drum, remove the center spindle and replace it with a plate to hold the fingers. Is this about the jist of it? I was wondering how the water drainage system was set up.
@reptilehunter7 I would love to try, but I do not hunt ducks or geese. There was a guy I work with that was going to bring one over and never did. If your ever in the Northeast Ohio area look me up, I would welcome the chance to try.
OMG that's awesome i have an old working washer just sitting around in my basement and about 8-10 chickens coming up for their time. need to build one of these lol great idea
This is great! I'd love to get information on how you did the featherplate. A few friends and I would like to go in together to make one of these. plucking is such a big job and we'd love to be able to do this without the full assembly that the whizbang requires. Are you still sending info to people? my email address is teresawesa@ymail.com
a hole new spin on the fraise beat your chicken huh?
jamesmoisson 2 weeks ago
I think I heard the chicken say, "What a fucking ride"!!
bushna2007 2 weeks ago
Does deplucking a chicken in this manner cause any bruising to the tissue?
ivnoh 2 weeks ago
You were told to dress the chickens! Now they are all naked!!
tucsonpersonified 3 weeks ago
now time to eat redneck chicken!
syalcin123 1 month ago
I've looked at several of these on youtube and I'm always left with the same question: where do all those feathers go??
rainbowsnbubbles 2 months ago
@rainbowsnbubbles There is a 1/2 inch gap between the spinning plate and the tub. The feathers simply fall under the unit, after about 75 birds I need to move it.
pzlr0v 2 months ago
thanks for your explanation, happy new year to you, your idea wil help me to earn $5000 per month
seguradojr 2 months ago
seguradojr - The motor spins at 1725 attached to the 2.5 inch drive pulley the belt drives a 10 inch pulley attached thru a front wheel drive car bearing assembly to the plate making the final drive 431 RPMs.
pzlr0v 2 months ago
congratulations for the idea, how many RPM the engine has this machine if you do not know who the manufacturer of it,
because I need to make one for my company here in Brazil, thanks for your attention and success for you and your family.
seguradojr 2 months ago
if the chicken wasn't dead, he certainly is now
smiltee 2 months ago
wooooooohoooooooooo i wnt ride :D
Wili449 3 months ago
Wouldn't all the tumbling and rubber fingers "bruise" the meat? I have no experience but very interested. Would this work for turkey's as well???
BUBnEM01 3 months ago
@BUBnEM01 Surprizingly not at all. I washed hundreds of chickens thru the washer and about 10 turkeys.
pzlr0v 3 months ago
@BUBnEM01 Yes there is a video under chicken washer with a turkey too.
pzlr0v 3 months ago
I'd love a copy of those plans... you can find me on facebook as Joel Hallet
jlhallet 3 months ago
Seams like a huge waist of water. We are in a desert, so using water like that would be my only concern. We either skin them or pluck them by hand here.
strawman007 3 months ago
>then cut the thighs off after popping the hip joint and finally filet off the breast, making them boneless skinless breast.<
If you're going to produce skinless chicken breasts, why not just skin the chicken in the first place? that's faster than even a chicken plucker. The skin's the best part anyway!
sagehilll 3 months ago
@sagehilll The plucker not only removes the feathers but the dirt as well, trying to skin a chicken is hard with all the feathers getting onto the meat. I do agree the skin is needed for the wings legs and thighs.
pzlr0v 3 months ago
:O That's cool as hell.
ZakkSparxx 4 months ago
What size is the washer tub? I'm not sure mine is big enough.
Nesabyne 4 months ago
Sure as hell faster than by hand.
cbarsonfire 4 months ago
This has been flagged as spam show
would you please share with me how to build the plucker
tangerin010@gmail.com
thank you
natashia010 4 months ago
please send plans to. annruger@aol.com. thanks
annruger 4 months ago
what was the web site you ordered the rubber fingers from, i could not understand it in your video
Fletchman08 5 months ago
@Fletchman08 kent-company dot c o m
pzlr0v 5 months ago
@pzlr0v
which ones did you get in there. They got bunch of different types of fingers.
filmftw3 3 months ago
@filmftw3 kent-company dot c o m the model number was C-25
pzlr0v 3 months ago
May I have a copy of the plans, too, please? sparky1@ix.netcom.com
Sverre101 5 months ago
can you email plans, I have a washing machine and rubber fingers and just need a clue..... chickens@naessigs.com
Naessigs 5 months ago
This has been flagged as spam show
Hi
If its not too much trouble, could you also email your plans on how you made this to me please at 76louise@gmail.com. It took my other half an hour and a half to pluck one by hand, we are amazed that your plucker reduces the time to about 30 seconds!!
76loopy 5 months ago
Hello,
By far I like your idea on the chicken plucker best. Could I please get a copy of the plans as well? Thank you so much.
hiddenoakfeeds@gamil.com
hiddenoakfarms 5 months ago
Could you please send me a copy of the plans? Thanks. rmitchel@uwsp.edu
mathman54481 6 months ago
it seems like you get alot of requests for those plans it wouldnt be a bad idea to upload them to mediafire or some kind of file hosting site and have it run through adfly and make a few becks its not alot and the people who want it wait 5 seconds and then click skip ad and youve made a few cents :D
cjwolfer 6 months ago
Hi there, was hoping you might still be willing to send plans out on your plucker... beewench at ymail dot com....
thanks!
BeeWench 6 months ago
Great job! I would love to have the plans! ChristinaJoMD@yahoo.com Thanks
TheChristinaJo 6 months ago
Hello - I left a message here a couple weeks ago. I would like a copy of the plans to build this too, please. dawnb52 at g mail dot com This is great.
browneyedsusie1 6 months ago
Looking at building one. We don't process 30 at a time but I still hate plucking them. The wings are the worse. Probably 10 at a time around here. Thanks for the info.
dixdox62 6 months ago
I'm interested in how to clean the washer when your done?
dixdox62 6 months ago
@dixdox62 You flip it on its side and scrap and rince the feathers out, after about 30 birds I remove the feathers if doing many birds. Then when I'm done for the day I rinse the tub out with bleach. Surprisingly there is very little mess, when seperating the chicken, I cut the wings off at the shoulder joint, then cut the legs first at the knee joint then cut the thighs off after popping the hip joint and finally filet off the breast, making them boneless skinless breast.
pzlr0v 6 months ago
This has been flagged as spam show
Sir, I would greatly appreciate the plans as well, my address is below. Thanks!
gunnut1973@gmail.com
jdrimm 6 months ago
Well you probably never thought you would get such a great response from your plucker:) I would appreciate the plans if you wouldn't mind. Moises@moisesmorales. Com thanks.
MyFBOTV 6 months ago
The fingers were model C 25 from w w w dot kent -company dot c o m factory direct from Kencal Rubber 3545 Normal Av Chicago Il 60609. To me looks like they changed names to w w w dot calumetrubber dot c o m
pzlr0v 6 months ago
can u send me the plans for this plucker
brennanisshort@yahoo.com
brennanisshort 6 months ago
I picked up a washing machine just for this purpose today! Would you please send me the plans at the.3boyds (at) yahoo.com?
4bellarae 6 months ago
HI, can you also send me the plans as well? I would really appreciate it! my email is: savenursecrissy@aol.com also was wondering what temp and how long to scald first for chickens and turkeys? I can't seem to get it right and keep hearing different temps. thank you for your time!!!
savenursecrissy 7 months ago
May I have plans for the chicken washer? email is jimandcathyhansen@netzero.net Thanks. Jim.
gymhansen 7 months ago
I am interested in your plucker..could you please e-mail me the plans also? This will work great for my children's 4-H Chicken business.
1127527@att.net
SuperSEAL1993 7 months ago
This has been flagged as spam show
please send me the plans too - this is great!!! dawnb52@gmail.com
browneyedsusie1 7 months ago
This has been flagged as spam show
I would like a copy of these plans too. this thing looks way to slick to not do!
nodakdave@gmail.com
ndkdave 7 months ago
FUCK YOU
clfetter 7 months ago
Please send me your plans urbanbloomstudio (at) gmail (dot) com
corrinschlecht 7 months ago
This has been flagged as spam show
can u also send me the plans for this chicken plucker to email to alesiaheating@gmail.com
Dalesia1 7 months ago
hi,
can you send me the plans too?
andregtsantos@hotmail.com
thank you very much!
andregtsantos 7 months ago
This has been flagged as spam show
Could you also send me the plans too thank you soo much. Great idea very creative.
E-Mail:jake_sperley@hotmail.com
Thank you!!!
jaxfan2235 7 months ago
I've ripped off you're idea,and incorporated it into a small dog grooming business..They generally can walk in a straight line after about an hour..If not i blame it on the shampoo.
MrBandogs 7 months ago 10
@MrBandogs Little too much shampoo and it would leave a cat look like Dr Evils.
pzlr0v 7 months ago
Please send plans! Got so excited about this I already bought a used washer. Email: nielsensputer(at)aol(dot)com
nielsensputer 8 months ago
Can you please send me plans, also? Thank you so much! Send to blshls@yahoo.com
blshls 8 months ago
Horror... xDD
tomlajsz14 8 months ago
hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahahahaha hahahahahahahaha
fattypack808 8 months ago
sorry: left off email oikos(underscore)investments(at)sbcglobal(dot)net
jeanetteswu 8 months ago
could you send me the plans. thanks in advance.
jeanetteswu 8 months ago
why not just skin um, then you can make a hat.
okbye1 8 months ago
5 Whizbang salesmen don't approve of this video...
amaroq69 8 months ago
Please send copy of plans to lauralramirez@yahoo.com! You did an incredible job!
PrincessPink122 8 months ago
This has been flagged as spam show
Hello ppl! Send me a plains! Thank you verry much! Piki999@gmail.com
Pikivole 8 months ago
This has been flagged as spam show
can you send plans to allisonraecaron@gmail.com......i've got 50 chickens to do in about a month! thanks!
allisoncaron 8 months ago
Hi! Oh my gosh...this is amazing!!! Would you be so kind as to send a copy of the plans to me at prioritybuilders@verizon.net - ? THANKS!
hkellstrom 8 months ago
I see you have many requests for plans. Could you send them to me also? amleber at comcast dot net
3lebers 8 months ago
This has been flagged as spam show
Hi there!!! We are scratching our brain as how to make this!!!! You did an awesome job!!!! Could you please send us the plans???? Our e-mail is shouldbhunting@gmail.com Thanks so much!!!
22hillbillychick 9 months ago
This has been flagged as spam show
This is the best idea I've seen so far in researching building a chicken plucker. Now I have a reason to keep the old washer when we get the new one. May I please get a copy of the plans as well. Thank you so much!!! Lorywd@gmail.com
lorywd 9 months ago
Please send me the plans as well. hollycordova@yahoo.com
myersrentalpropertie 9 months ago
cud u send me the plans aswell plz this machine is awesome....deanbrck@aol.com
2000boner 9 months ago
Could you please send plans?
jones.flick15@yahoo.ca
MrJonesflick 9 months ago
Great way to keep the washing machine out of the landfills !!!!!!
Would love a set of plans Thanks in advance
jesttesfamily@gmail
WOODYAHH 9 months ago
This has been flagged as spam show
Please send a copy of these plans ovstag.group@gmail.com
tagra123g 9 months ago
Wowwwwww!!! amazing...Sir, can you please send me the plans and details on how to make this amazing chicken plucker? please please please!!! please send it to graveyard_disciple888@yahoo.com.ph
THANK YOU!!!
kadezalei 9 months ago
NO CHICKEN LITTLE!!!!
hspears0742 9 months ago
hi would love to know how to make one of these please could you send me plans mlaz1985@hotmail.co.uk thanks
laztbf 9 months ago
This is great, I would love to see the plans. Could you send them to vahighlands11@yahoo.com?
timothykeefer 10 months ago
Would love the plans. Can you send them to vahighlands11 @yahoo.com?
timothykeefer 10 months ago
It would be awesome if you could send me the details on how you did. i have a spare washer right now and do alot of turkey hunting.it would be very much appreciated.rlagnew@sympatico.ca
SweetpeaA5 10 months ago
This has been flagged as spam show
Can you please send me the details of how to do this? twomilburn@hotmail.com
grading40 10 months ago
this is the coolest thing i have seen on youtube can you send me plans please.
we have alot of chickens comming up to dress. really need to know how to secure the bottom plate to something solid to run the motor. the plans would be greatly appreciated. spooonie_01@yahoo.com
ThelazyHranch 10 months ago
I would love the plans for this! it is the best invention ever
terrie@pinetel.com
beechterrie1 10 months ago
I would love the plans for this! it is the best invention ever
terrie@pinetel.com
beechterrie1 10 months ago
Hi, great job with the chicken washer. I would like to attempt a chicken washer of my own, could you please send me a copy of the plans? kyfishguy@yahoo.com
Thanks much,
kyfshguy 10 months ago
Could you please send me the plans also? phlruger06@aol.com
phlruger06 10 months ago
This has been flagged as spam show
Would love to have the plans also if you are still giving them out . . . jillette68@gmail.com thanks!!!
jillette68 10 months ago
This has been flagged as spam show
Would love to have the plans also if you are still giving them out . . . jillette68@gmail.com thanks!!!
jillette68 10 months ago
Would love to have the plans as well.....am just new to raising chickens and this seems to be a great idea.
curtnsue8155 10 months ago
This has been flagged as spam show
Please send me the plans.
Thanks!!
beckysaussies@hotmail.com
bhowi44 10 months ago
This has been flagged as spam show
What a great idea...can you email the plans to me also? cnirosky@gmail.com
thanks!
LrRubie 10 months ago
This has been flagged as spam show
What a great idea...can you email the plans to me also? cnirosky@gmail.com
LrRubie 10 months ago
hahaha thats actualy a pretty good idea but it just sounds wierd
HatchetFirelette 10 months ago
could you please send me the plan too. my email is abmvalentine@yahoo.com
thank you in advance you help is most appreciated !
bakingintherain 10 months ago
Please send me the plans. We have a washing machine all ready for this! Thanks! tomater_head@yahoo.com
MsBarefootMom 11 months ago
This has been flagged as spam show
this is just what I need. Could you please send me the plans. I REALLY want to build one with my 14 tear old son. mt e-mail is hellboundhillbilly@gmail.com thanks Todd, Awesome simply awesome better than a whizbang
hellboundhillbilly73 11 months ago
Wow this is awesome! I would also love a copy of your plans if possible? I have about 150 chickens to be butchered in 5 weeks, this would really help!
Thank You
tina-i-won@cox.net
tmanche01 11 months ago
This has been flagged as spam show
How can I get plans? Email is deescanlon@gmail.com.
Thanks
Route9Auto 11 months ago
I have a washer and the fingers. how did you go about building it. Please someone send me the plans. ryonhays@yahoo.com thanks.
ryonhays 11 months ago
This has been flagged as spam show
Hi, I would also like a copy of your plans Thank you in advance, Bennyties@gmail.com
nyvendor 11 months ago
That is so awesome, If you could please email me the plans at dnash@tngun.com I would appreciate it, hand plucking is not fun...
TNGun 11 months ago
This has been flagged as spam show
hi! i am interested in your chicken washer plans. Could you send me the plans. Thank You! My email is pmoua1684@yahoo.com
pmoua1684 11 months ago
This has been flagged as spam show
hi! i am interested in your chicken washer plans. Could you send me the plans. Thank You! My email is pmoua1684@yahoo.com
pmoua1684 11 months ago
This has been flagged as spam show
Love it! I am sure you are bombarded with requests, but if and when you have time, could you send me a copy of the plans? My email address is RachelDazy@gmail.com Thank you so much! This is AMAZING! When i was a kid, I WAS the chicken plucker!
RachelDazy 11 months ago
I could sure use a copy of your plans. Could you email them to me as well?
My email is 4luvd1s@comcast.net Thanks so much!!
4luvd1s 11 months ago
This has been flagged as spam show
i love this. some people are just natural at thinking outside the box. i would also like a copy of your plans, it just so happens that i just put my washer outside a week ago because it was leaking
it would be perfect for this
thanks ali_acollins@hotmail.com
11myzeus 11 months ago
That's just badass.
junkietomato 11 months ago
I would defiantly like a copy of the plans, If you could e-mail to irishredneck4@yahoo.com Thanks
irishredneck1973a 1 year ago
This has been flagged as spam show
If it's convenient, please send me the plans as well.
quiringb@gmail.com
Thanks,
quiringb 1 year ago
This has been flagged as spam show
If you don't mind sending the plans as well that would be awesome.
quiringb@gmail.com
Thanks,
quiringb 1 year ago
I am interested in your chicken washer plans. Could you send me the plans. Thank You
oldmotherhubbard1 1 year ago
@oldmotherhubbard1 Yes I can if you provide a valid email address, youtube will not allow pdf files to be attached to email.
pzlr0v 1 year ago
@pzlr0v my email is (sandypug@live.com
oldmotherhubbard1 1 year ago
This has been flagged as spam show
@pzlr0v my email is (sandypug@live.com)
oldmotherhubbard1 1 year ago
@pzlr0v Would it be possible to get a copy of your plans, I have about 150 chickens to butcher in about 5 weeks and this would really help! Thank You Tina
tmanche01 11 months ago
@pzlr0v Please send me the plan also so I can get my husband to build us one. When that blue moon passes our way. beckysaussies@hotmail.com
Thanks
bhowi44 10 months ago
@pzlr0v I would like to have the plans please! ccason@nemr.net Thanks!
1getemout 7 months ago
@oldmotherhubbard1
Hi I was wondering if you could email these plans? I have 150 chickens to be butchered in about 5 weeks this would really help! Thank You Tina
tmanche01 11 months ago
I am interested in the plans too.
TheGoober125 8 months ago
This has been flagged as spam show
Hey there. Amazing video. Any chance you can send the plans for this amazing machine? My email address is benjamin.j.finn@gmail.com. Happy to build a website for you in return to advertise this machine to the world.
finnbe1988 1 year ago
This has been flagged as spam show
Would love the plans for this dipence71@hotmail.com
dipence71 1 year ago
I see you are pretty popular with your chicken washer! If you have time would you send me the plans also? I would appreciate it. Thanks for your creative thinking!
Michelle mpaulimonte@yahoo.com
bugy216 1 year ago
This has been flagged as spam show
Hi this is genius. I really need something like this i have to hand pluck 75 birds every two week :(. can you send me plans to nekromad@gmail.com thanks
karismatikkween08 1 year ago
Comment removed
karismatikkween08 1 year ago
Would you please send me the plans for this to 99wordfish@Att.net. Thank you.
99wordfish 1 year ago
please send plan to iamdlogan@yahoo.com...this is the best video I have watched...will save me and family days of time...thank you so very much...can we send a cash donation? iamdlogan
iamdlogan1 1 year ago
This has been flagged as spam show
Great machine I also would be interested in plans. I have the washer already and am wanting to get up and running for the summer. My email is eric1swander@gmail.com I would greatly appriciate the plans for this awesome machine. Thanks. Eric
bobandtom123456 1 year ago
Really like the way this looks and works. We raise turkeys, chickens and broilers. the pain has always been in the plucking. Could you send me a copy of the plans for this? My email is petem@satx.rr.com
thanks for posting the video.
petem1999 1 year ago
Excellent! I have a question, did you have to tone down the speed at all? My only concern is tearing the skin, but this looks like it does just fine.
Also, have you tested it on larger fowl, like maybe a goose or turkey? I'm just wondering about size/weight limit.
longtail4711 1 year ago
@longtail4711 send me an email account and Ill send you the plans, Yes I used a 1725 RPM motor, and yes I have an video on youtube with a Turkey in Chicken washer. Thank you for looking.
pzlr0v 1 year ago
@pzlr0v i am interested in some plans too, weldermatt07@yahoo.com, nice build
weldermatt07 1 year ago
@pzlr0v Could you send me a copy of the plans as well? My email
address is 4luvd1s@comcast.net Thanks!!
4luvd1s 11 months ago
spooonie_01@yahoo.com
ThelazyHranch 10 months ago
This has been flagged as spam show
can you send me the plans for this krystal_0421@hotmail.com
krystalbull 1 year ago
@MrMarcusx9 The feathers go underneath, so you simply lift it up after about 40 birds and shovel the feathers. I wash it with bleach before and after each use for safety. It works really good. We had chicken tonight for supper.
pzlr0v 1 year ago
How easy is cleaning the machine after processing?
MrMarcusx9 1 year ago
@MrMarcusx9 The feathers go underneath, so you simply lift it up after about 40 birds and shovel the feathers. I wash it with bleach before and after each use for safety. It works really good. We had chicken tonight for supper.
pzlr0v 1 year ago
My husband loves this but needs help with building one...! An awesome project...thanks for sharing...If plans are available can you send them to dara.design@sympatico.ca
luckyducky7719 1 year ago
Would love a set of plans for this. How ingenious!
happylittlefarm@aol.com
DarlaDoodle 1 year ago
okay so i see here that everybody wants your plans and ill admit i want them also but hey how about i want your washer? if you are interested in helping out a hand plucker salmonslayer1991@yahoo.com is my email thanks!
SalmonSlayer1991 1 year ago
This has been flagged as spam show
Awsome machine way to use necessity to invent LOL I'd love the plans if you would be so kind. please send to cabovpanther2@gmail.com. Thanx
cabovpanther 1 year ago
Great job, can you send me the plan to your tub plucker to jr718202@aol.com. Thanks
gtbanna70 1 year ago
Love the idea! Just did 45 yesterday with a drill. It was not bad, but my arms and back are sore today. Could i also get plan? send to jer2911ym@yahoo.com
Great! Seth
mssponski 1 year ago
Please send plans to favablue at yahoo dot com
Thanks so much!
Favablue1 1 year ago
could you send me the plans also? douga@mchsi.com
dahrenholz1 1 year ago
how can i get the plans please send to vanpelt508@aol.com
vanpelt508 1 year ago
how can mi get the plans
vanpelt508 1 year ago
i would like a set of plans for your plucker. if u are making them avialable
michaelandrade1213 1 year ago
that is amazing!
invis648 1 year ago
Can I get plans for this? They can be emailed to me at Deanner03@yahoo.com Thank you very much!
Deanner03 1 year ago
Can I get plans for this? They can be emailed to me at Deanner03@yahoo.com
Deanner03 1 year ago
The only problem I see is the buildup of feathers in the machine.
hsuanstr 1 year ago
This has been flagged as spam show
I was hoping you could send me the plans to this to nicbouwes@gmail.com. I got flagged as spam but I am really interested in building one of these. I ordered the fingers and got a used washing machine. It looks as though you fix the drum, remove the center spindle and replace it with a plate to hold the fingers. Is this about the jist of it? I was wondering how the water drainage system was set up.
chukobuko 1 year ago
@pzlr0v how well does this work on ducks and geese. i know they have extra down that is much tougher to get off than regular feathers
reptilehunter7 1 year ago
@reptilehunter7 I would love to try, but I do not hunt ducks or geese. There was a guy I work with that was going to bring one over and never did. If your ever in the Northeast Ohio area look me up, I would welcome the chance to try.
pzlr0v 1 year ago
pretty cool but does it beaks bones ?
lordmat666 1 year ago
@lordmat666 No, it does not break bones, but sometimes the head comes off . Last weekend I processed 50 in roughly 3 hours with kids helping.
pzlr0v 1 year ago
Hi Tom,
could you please email me a copy of the plans for this great invention?
Thanks.....rtoth@sympatico.ca
Way to think outside of the box.
robbietoth 1 year ago
Great Idea could you please send me the plans to saltynut@uniontel.net Thank you VERY mutch
MrSaltynuts69 1 year ago
OMG that's awesome i have an old working washer just sitting around in my basement and about 8-10 chickens coming up for their time. need to build one of these lol great idea
jayarab 1 year ago
This has been flagged as spam show
Great idea. Could you send me plans for your plucker? nicbouwes@gmail.com
Thanks
chukobuko 1 year ago
This has been flagged as spam show
I absolutely love this design, it is simple and reliable! It looks look an article that should be in a DIY type magazine. I love it!
Could you please email the design/pictures or instructions showing how you made it? I would be very thankful.
John
America1776@gmail.com
america1776gmail 1 year ago
Comment removed
america1776gmail 1 year ago
Comment removed
america1776gmail 1 year ago
Comment removed
america1776gmail 1 year ago
This is great! I'd love to get information on how you did the featherplate. A few friends and I would like to go in together to make one of these. plucking is such a big job and we'd love to be able to do this without the full assembly that the whizbang requires. Are you still sending info to people? my email address is teresawesa@ymail.com
teresawesa 1 year ago
Do you have some plans to help others like me build thia chicken washer?
robandelissa 1 year ago
This has been flagged as spam show
I really like your chicken washer. Could I get a copy of your plans? My email address is robandelissa@gmail.com
robandelissa 1 year ago