Micro T with 3S lipo 10250Kv brushless motor speed runs

[321juanc]

How did you fit that battery?

[airsoftandrccars]

whitch micro should i get

[DOJIELDIENVE]

@airsoftandrccars not sure, i can't believe i haven't go a micro 4x4 rally or truck yet.

[brushlessmicrot]

what gears do u run in the tranni i cant find metal ones anywhere for these i just got burrhsles

[DOJIELDIENVE]

@brushlessmicrot not sure anyone makes metal gears for micro t specifically. plastic gears I've noticed are usually more smooth. id like to try it though. are there any metal gears that work on micro T?

[brushlessmicrot]

@DOJIELDIENVE i dont know lol if there was i wouldve had them so idk haha i was tryiong to find a sight that makes custom gears but i couldnt all i can find is everything alumionum for it trany screws bearings case just not the gears

[ilovepokerguy]

What kind of run times do you get with that setup?

[DOJIELDIENVE]

@ilovepokerguy probably around 15 min. heat is more of a concern. in this case. the losi esc is barely up to the task. sometimes it shuts off when too hot. beats going up in flames but not good when stranded in the middle of the road

[MoneyMakerMan321]

Wow awsome video anyone know where i could get a 3c lipo for my micro t :) thanks guys

[DOJIELDIENVE]

@MoneyMakerMan321 toadzrc website has 3s lipo their service and prices are good

[theferrisjuggalo]

man the micro t's are a lot of fun, you ever think about putting some furr on it and pranking ppl ,its a lot of fun man i do it with mine in down town dallas

[DOJIELDIENVE]

@theferrisjuggalo thats gotta be funny. a big bird dove down on mine once out of nowhere it was awesome seeing the bird put on the brakes right after changing his mind about eating it. so in short, watch out for eagles. cheers

[bigflytrap]

Wow, how can the transmission handle such insane speeds!

[xVeNoMzAsHerZ]

&MrFresh3030 ok thanks allot I come back on you if I have a question ok ?

[DOJIELDIENVE]

The goal here was to build a reliable pocket rocket RC. I chose the Micro T because of small size and light weight. For speed, i used the brushless combo powered by Lipo. Reliability was harder, I was sure I could reach my goal if I upgraded the right parts. A strategic mix of plastic, aluminum and carbon fibre did the trick. Unfortunately the kit I chose is still not as reliable as I wanted it to be. The drive and tranny is just not designed for brushless power. I've got it to work well by kee

[MrPyroEnthusiast]

What all upgrades are in this?

[XLOranjeFan]

WHY?



[123rcman]

hi what pinion are you using on it ??

[lyricsandvideos]

whats the differance between a 10250kvand 8750kv

?? idk im new to rc cars

[xVeNoMzAsHerZ]

have i buy a reciver when i buy a brushless combo ? thanks nice micro

[MrFresh3030]

@xVeNoMzAsHerZ With your stock reciever you may get a lot of glitches with the brushless combo. Best to go Spekrum, they start at $100 and worth every penny.

[dsm2xtreme]

How long does a battery last?

[SuperbadProductionz]

Nice body wear did you get it

[001LosiMicroT]

good day! that was screaming fast!

[Tommyhonda100]

What's the difference between the 8,000kv and 10,000kv?

[AppSniped]

where did u get ur 3s lipo?

[Iatecookie2]

Willl you watch my video and help me? /watch?v=R-kPf-EUWy8 My brushless setup isnt working, thanks :D

[InfamousPlague]

Not nuff torque and whats the C Rating ??? (on the battery ofc)

[YourFantasyForLife]

does the charger in the ready to run package also charge the lipo batteries?

[DOJIELDIENVE]

@YourFantasyForLife I don't think so no. 

[treethi]

@YourFantasyForLife not at all, will damage lipo batteries

[pouncey007]

@YourFantasyForLife  NO

[Nuclearrc]

I just got a micro t 3 weeks ago And i thought it bit the dust the other day when it didn't want to run but luckily it's still ok and runs again I still don't know why that happened though? lol any way I'm looking at the new dsm brushless setup because I'm going to get a dx3s for my Savage X I don't plan on goin all out with the micro t but what other mods besides a lipo would u recommend for indoor use because thats where it'll be over the winter. Thanks! :) nice truck by the way!

[DOJIELDIENVE]

The only thing stock is the steering servo and front and rear shock towers. Chassis carbon fibre by hot racing. Tires are by Atomic I think.

[Rock4955]

Hey any other hop ups?

[DOJIELDIENVE]

true. there was a few things i had to fix, like the spur gear being wobbly. and installing CVD s. never got ceramic ball bearings, too expensive. i got it to go faster in my later vids. but lowered the gearing. so really about the same speed with more torque.

[mediarocker543]

Dude I'm surprised you're isn't any faster with the 3S and a 10,000KV motor... My 7000KV does about 25-30 with it's offroad gearing..

[mightymainac]

i have a micro t, 1025KW(i hopethats right) 3s lipo and everything else is stock but ive tryed all kinds of cluch figureations, but ive gone through 4 trannies. imnot going to buy another one untill i find a better solution so do you have a idea? thanks

[MrDjrudge]

cheers mate and dont soppose you know wher i can get a cheep stock esc/receiver for the micro t from as ??

[roberthartley2009]

nicely done, my bro put lipo n such on his, it caught fire one night.lol

[MrDjrudge]

hi what do you meen by glueing the diff ?? and does this help stop shredding gears?? if so what bits do you glue? nice car

[DOJIELDIENVE]

@MrDjrudge the diff is a set of four small gold colored gears inside to bigger plastic gears. to lock the diff you just put some glue inside where the metal gears are, then put it all back together.

Locking the diff benefit is that there is less wear so less gears to maintain. (less shredding)

you should not lock the diff if you plan on racing as you will loose some turning speed.

best to have two diffs. one locked (glued) and one not. hope that helps. thanks.

[DOJIELDIENVE]

yeah, vie seen others on youtube that are even faster. crazy:)

[boomerangfreak]

man these little cars don't supose to go so fast LOL can it go faster ?? hahaha

[thisismeinhere]

how did you fit everything in plus put the shell on

[DOJIELDIENVE]

@thisismeinhere my other video called: "Losi

brushless Micro T on the street" shows under the shell at the 2:30 min.

[DOJIELDIENVE]

The diff is glued. And the body I got on eBay. Look for Final Evolution MicroT body or MicroT carbon body. They also make Some for the micro dt.

They are real carbon fibre under the clear lexan. I Like the way these look.

[kanaybid]

where did you get the body its awsome

[nerdykid136]

IT'S A SPEED T! Did u glue ur differential?mine keeps shredding :P

[DOJIELDIENVE]

It gets hot but it doesn't overheat. don't go full speed all the time. You can't even turn on full speed anyways. If you slam the throttle you will bend the dogbones.

[michaelbroek1]

can you do with the 3s only speedruns ore can you drive the whole lipo empty.

ore wil it over heat??

sorry for my enlish am from holland

[DOJIELDIENVE]

Yeah its funny how fast they are for their size. mine is also mostly carbon and aluminium.

[rcmotorsect]

mine cartwheels too!, thats why mine is all aliminium and carbon fibre, they go soo fast with the mods!